Tips for those who have a tree plaster: chassis for external work

If your home has an exterior made of tree plaster, maintaining its durability and beauty will need paying close attention to the chassis when performing exterior work. Tree plaster requires regular maintenance to endure the weather over time, despite its natural beauty and eco-friendly qualities.

The first thing to do when scheduling maintenance is to look for wear or damage on the plaster. Tiny cracks or discolorations may be signs of underlying problems that require immediate attention to stop further damage.

The longevity of tree plaster depends on the selection of the appropriate chassis materials. Select materials that offer strong resistance to weathering and structural stresses while enhancing the plaster’s natural appearance.

The lifespan of tree plaster can be greatly increased with routine cleaning and protective treatments. Employ mild cleaning agents and methods to eliminate debris, mildew, and contaminants without causing any harm to the plaster’s exterior.

Is it possible to put a wooden house outside

There are several arguments put forth by those who favor plastering the house:

• Wooden materials are sagged over time, rot;
• wood suffers from insect damage, rodents;
• The wooden structure is subject to fire;
• The hungry house holds the heat much more;
• plaster aligns irregularities on the walls.

Choice of composition for plastering wooden walls

Plaster decoration of a wooden house’s facade is a sophisticated technological process requiring not only financial investment but also skillful material, tool, and device selection. Locating sensible masters with training, experience, and knowledge is also crucial. They will advise you on selecting exterior building materials so that the covered home is attractive, dependable, and contemporary.

Think about the type of stucco that is currently used on wood for exterior work.

Clay plaster

This is a plastering option that works well. Many choose to build their homes close to rivers and in areas with natural clay gallows because the materials will be more affordable for them. Finding out how much fat is in the clay is crucial because while fatty clay dries quickly and cracks, it glides smoothly. Thin solutions, which contain a lot of sand, wash off, rinse off, crumble further. A well-balanced mixture of sand and clay will yield high-quality plaster.

Quick test! Grab a handful of unfinished clay and ride it into a soft ball with your palm. Using the thumb and forefinger, press. Watch out: the clay is oily and needs sand added to it; there are no cracks anywhere. A ball is dispersed; it’s thin and covered in sand. Good clay takes the shape of a ball and, when compressed, starts to crack slightly at the edges.

This process can also be used with a finished clay mixture that has been purchased. The following products serve as examples of the range:

• clay-sand;
• clay with an admixture of fiber;
• Clay with felt, sawdust, wool.

"Dedovsky," a useful method for using your hands to knead a clay solution: Gather three buckets of clay, seven sand, and twelve handwritten straws (sawdust). Pour 100 g into a pail of water. PVA, or wallpaper glue.

1. Make dry kneading clay, sand, straw.
2. Separately, glue is diluted in a bucket of water, gradually poured into a dry mixture. He makes elastic plaster.

The procedure listed on the package is used to prepare a working solution that was purchased from a construction supply store.

Crucial! One part M400 should be added to the working mixture, according to some masters.

Cement-sand

Cement and sand solutions are in demand and are thought to be the most well-liked by malesteules-stucaturs. After purchasing a completed mixture, it is diluted with water according to the recommended ratio listed on the bag.

Additionally, creating a workable solution on your own is simple:

• cement – 1 part;
• sand – 4 parts; It is important to choose the sand of the middle fraction, since the small one makes the coating fragile, and from the large wall it looks rough, it will quickly accumulate dust.
• water;

Take note! When purchasing, be mindful of the cement brand. Compression strength is indicated by the index "M". The cement is stronger the higher the number. They also consider if the "D" index is present. It lists additives that improve resistance to water, frost, setting speed, and corrosion.

Gypsum plaster on wood

This material is strong, decorative, and elastic, but it is not appropriate for plastering exterior wooden surfaces.

• too small adhesion;
• The tree quickly absorbs moisture, expands and the plaster goes with cracks.
• afraid of precipitation;
• knead in small portions, due to solidification;
• Not was it.

Fascinating! Create a decorative insert on the wooden surface of one of the walls that is shielded from the rain and snow. In order to achieve this, the wall is primed multiple times and unique gypsum pastes containing polymer additives are employed.

Lime

There is discussion over whether using lime plaster is appropriate. Certain experts claim that this is a good option for facade work. Its antiseptic properties, which shield wooden surfaces from mold and fungus, make it valuable. provides a layer of good leveling. Lime plaster varieties include:

1. Lime-cement, prepared in a ratio of 2: 1;
2. Laundice-sand-1: 4;
3. Laundice-Glane-0.5: 1;
4. Laundice-gypsum solution is kneaded 3: 1.

One argument used by those who oppose applying lime to external wooden walls is that it will not withstand mechanical influences as well.

Lime cement is one of the four species that satisfies the technological requirements. It adheres to the wooden surfaces and binds firmly to the fight. The surface dries out after two to three days, and gravity sets in after thirty minutes.

There are multiple methods for getting a solution ready:

The initial method. A dry method is used to mix dry ingredients. One-third of the water dissolves the lime dough. Pour lime milk into a dry mixture gradually. Blend.

The second approach. using a construction mixer to combine all ingredients until the required consistency is reached. This technique is appropriate for seasoned plasterers who can "by eye" judge the pasta’s elasticity and workability.

Take note! All you need for the lime solution is slagged lime! Using lime that hasn’t been completely or completely burned will reverse the effects of the coating, causing the wall to crack and develop irregularities.

Several important factors need to be taken into consideration if you live in a home with timber plaster in order to ensure its longevity and aesthetic appeal. It is important to prepare properly; start by looking for evidence of wear or damage on the current plaster. Promptly addressing these problems aids in halting additional decline.

Choosing top-notch materials is crucial when organizing timber plaster restoration or upkeep. When painting or coating wood surfaces, use paints and coatings made especially for outdoor use. The weather resistance and durability offered by these products are essential for preserving the integrity of the facade of your house.

Think about the local environment and climate in your area. Severe weather can hasten the deterioration of wood plasters. By protecting the wood from moisture, UV rays, and other environmental factors, protective coatings and finishes help extend the life of the wood.

To keep timber plasters looking good and maintaining their structural integrity, regular maintenance is essential. Plan on doing routine touch-ups and inspections to take care of any small problems before they get worse. In the long run, this proactive approach can save you money and time.

The primary thesis statement for your paper is as follows: To preserve a wooden facade’s longevity and visual appeal, extra care and attention must be given to its maintenance. For homeowners with wooden exteriors, this article provides helpful advice on how to prepare your home for painting, how to choose the right materials, and how to maintain your wood exterior over time to prevent weathering and decay. You can prolong the lifespan and aesthetic appeal of the wooden facade of your house for many years to come by using these tips.

Video on the topic

How to do not plaster #plaster #construction #buildhlam

How to prepare a solution for putty walls.

How to make sure that the plaster is well held on the wall?

Wall plaster in lighthouses

How can aerated concrete be plastered? We tell you how to choose the right material. #repair

Gypsum plaster eight errors

Plaster: all about the material and alignment of the walls | Secrets, tips and experience of a professional