Thermal panels with marble chips: what are needed for, the installation method

Thermal panels with marble chips are a fashionable and useful way to improve the exterior of your house. These panels are intended to enhance your home’s thermal insulation in addition to beautifying the exterior. These panels fulfill two functions by fusing the practicality of thermal insulation with the visual appeal of marble chips.

The main purpose of thermal panels with marble chips is to improve the efficiency of temperature regulation within your house. They contribute to energy savings and improve indoor comfort by acting as a barrier against heat gain in the summer and loss in the winter. They are therefore a wise investment for homeowners trying to save money on heating and cooling.

There is a simple process involved in installing marble-chip thermal panels, which can drastically change how your home looks. The current facade is first prepped by making sure it’s tidy and clear of any trash. Afterwards, depending on the particular type and design of the panels, they are carefully mounted onto the surface using the appropriate adhesives or mechanical fixings.

The longevity and low maintenance needs of these panels are two of their main advantages. Because marble chips are resistant to fading and weathering, your home’s facade will look beautiful for many years to come with little maintenance. Long-term cost savings are also a result of this durability because you won’t need to replace or repaint the panels as often.

What are the advantages of the material

The money invested in marble chip thermal panels usually pays for itself in a winter or two. The energy efficiency of the products is to blame for this. Heating the walls qualitatively once is more cost-effective than paying large sums of money annually. It was warm, if only in the house.

There are various clear benefits to using marble chips in contemporary thermal panels.

• Small mass . Panels weigh up to 2.5 kg. This allows you to use them in the decoration of old and dilapidated houses. Installation can only be performed with glue. Without the obligatory use of dowels and screws;
• Elasticity . Something resembles a flexible stone according to this characteristic. The baby does not crumble and does not crack during operation. Connects the baby using acrylic and additional substances;
• Resistance to atmospheric influences . Panels are not afraid of temperature differences and alkaline solutions;
• An attractive appearance . A choice is offered to a choice. You can choose panels for any color and taste;
• The presence of marble crumbs . This is an ecological and natural natural material. Baby reflects solar radiation. This retains the appearance for a long time;
• Mold resistance and fungus . The breathing structure of the panel gives them another advantage. The structure is ventilated. This does not allow mold and fungus;
• Simplicity of installation . Installation can be performed with your own hands. It is enough to buy a special glue;
• Repayable . If one panel is damaged, it can be replaced separately from the rest.

These are compelling reasons to purchase such panels.

The question of whether they are superior to fiber cement slabs or the same facade panels for brick is pertinent. We will undoubtedly talk about it with you in some way.

Manufacturers and their prices

The product’s cost is determined by the panel’s thickness and the brand.

We will highlight the following manufacturers who are well-established:

• Kingda;
• Thermal systems;
• Polygrit;
• Teploeko;
• Thermopasad;
• Feldhaus;
• ABC;
• Stroeher;
• Cerrard;
• Termosit;
• FTP Europa and pr.

580 rubles will be required for a square meter. There are more costly choices available. The cost of one square meter of panels is between 1000 and 1300 rubles.

Features of installation

In the facade materials market, thermal panels containing marble crumbs have garnered favorable feedback. Their renown is expanding.

This is the reason why a lot of people wish to install these products on their home’s facade.

Here are some things to be aware of:

• The work consists of 3 stages. This is the preparation of the base. Then the method of fastening is selected, the crate is fixed, and then the panels are mounted;
• Glue installation is in demand. Then you do not need to level the surface. The glue itself will align everything. Maximum deviation of irregularities from 10 to 30 mm;
• The panels are marked, and then the sawing is done with a dry method;
• First there is a starting profile. The whole structure rests on it;
• To improve the adhesion of the panel and profile, a small layer of mounting foam is applied to the profile;
• Thermal panel is the first to be attached to the lower corner of the house;
• Glue with a gear spatula with a thin layer on the panel is applied;
• For auxiliary fastening, it is good to use a plate -type dowel;
• It is important to monitor the docking. So that the seams are the same;
• The choice of insulation depends on the material of the manufacture of the walls of the structure;
• For porous walls, it is better to use mineral wool. Foam polystyrene is suitable for concrete and brick;
• Installation work can be carried out in any weather. In addition to frosts below -15 degrees Celsius.

They make choices so frequently because of this panel. There are no installation-related issues. even in the absence of prior experience with the task.

We do it with our own hands

People want to know if they can create panels on their own using environmentally friendly marble chips.

Here, you must comprehend how they are produced within the confines of the company:

• granular polystyrene foam is foamed;
• Then the material is thoroughly dried;
• The binder material is laid in a special block form;
• dried polystyrene granules are loaded there;
• the form heats up;
• heating occurs until the block form is completely filled;
• Products are cooled in a vacuum special installation;
• The panel reaches a day.

The end product is a marble chip-and insulation-filled panel. They are arranged in a unified pattern and have close connections.

In the event that someone wants to start producing independently, they must:

• purchase block forms;
• buy a vacuum installation;
• find the supplier of raw materials in the form of marble crumbs;
• ensure heating equipment;
• rent a premises;
• hire workers and.

A daily production rate of approximately 100 products requires investments starting at 1.5 million rubles.

Making a thermal panel by hand and applying marble crumbs is therefore costly. For a one-time production, this is too expensive. However, how to evaluate business concepts.

Marble-chip thermal panels are an elegant and useful way to improve the appearance of your home’s facade. These panels are not only aesthetically pleasing, but they also play a vital function in enhancing buildings’ energy efficiency and insulation. Homeowners can improve their thermal performance and create an aesthetically pleasing exterior by installing these panels.

There are several important steps in the installation process for thermal panels with marble chips. In order to ensure proper adhesion, the current facade must first be thoroughly cleaned and prepared. After that, the panels are carefully mounted onto the surface using specialized adhesive. This technique aids in preserving the building’s structural integrity in addition to guaranteeing a secure attachment.

The longevity and low maintenance requirements of thermal panels with marble chips are two important benefits. Because of the covering of marble chips, these panels don’t fade or weather after installation. Because of their durability, there will be fewer long-term expenses and replacements or repairs required more frequently.

All things considered, marble-chip thermal panels are a flexible option for homeowners wishing to enhance the aesthetics and energy efficiency of their houses. These panels offer a contemporary way to update the exterior of any home by fusing aesthetic appeal with useful features like improved insulation.

For home facades, thermal panels with marble chips combine aesthetic appeal with useful features. These panels give buildings a fashionable appearance while improving insulation and weather resistance. The installation of the panels is a simple procedure that entails mounting them onto surfaces that have been prepared using adhesive or mechanical fasteners. This article looks at the benefits of using marble-chip thermal panels, how to install them, and things to think about if you’re trying to make your home’s exterior look better and function better.

Video on the topic

Drinking angles for marble thermal panels

Installation of thermal panels.

Facade thermal panels with marble crumbs of the Kingd factory.

Installation of thermal panels with marble crumbs "People"

How to fix thermal panels if the wall is uneven?