The use of thermal panels for lining the facades of wooden houses

Are you considering painting your wooden house’s facade? Perhaps thermal panels are the answer you’ve been searching for. These cutting-edge panels are a popular option for homeowners looking to update the exterior of their homes because they provide both practical advantages and aesthetic enhancement.

By improving your wooden house’s insulation, thermal panels can help you better control the temperature inside. These panels can help maintain a cooler interior during the summer and lessen heat loss during the winter by adding an extra layer of thermal protection, which over time can result in energy savings.

Thermal panels’ adaptability in terms of appearance and design is one of their main advantages. They can add a contemporary touch while enhancing the organic beauty of wooden facades because they come in a variety of colors, textures, and finishes. There are choices to fit every aesthetic preference, whether you like a traditional or modern appearance.

Beyond just being aesthetically pleasing, thermal panels also help wooden facades last a long time. By serving as a barrier against environmental factors like wind, rain, and UV radiation, these panels protect the underlying wood’s structural integrity, lowering maintenance costs and extending the exterior life of your home.

Benefits of Thermal Panels	Enhanced Insulation
Improved Energy Efficiency	Enhanced Aesthetic Appeal

Pros and cons of the thermal panels for a wooden house

There are benefits and drawbacks to using thermal panels to decorate the wooden house’s facade. The benefits consist of:

• Comfort when installing. The panels have a small mass and a large area, in view of which work goes faster. The material easily rises to a height and cuts. There are castle joints in the panels, which ensures light joints and strength.
• Panels provide high -quality facades insulation. Their use makes it possible to protect the walls from freezing. It is possible to talk about the effectiveness of such insulation by comparing the type of isolation used.
• They differ in moisture resistance. But water is still able to penetrate the finish, during installation work of inadequate quality.
• Minor mass of panels. As a result, the walls of the building do not experience strong additional load.
• The decorative part of the material will not respond to moisture. In fact, does not absorb it, there is no destruction under the influence of ultraviolet rays, which will make it possible to maintain the original appearance for a long time.
• Simple care for thermal panels. There is no need for periodic processing and cleaning.
• A significant range of thermal panels. It is possible to choose options that imitate masonry made of brick, stone or logs.

Drawbacks of these goods:

• The overestimated price of thermal panels. In comparison with competitors, the difference in value is 3. In this regard, it is advisable to make the walls thick with high -quality cladding.
• The duration of the operation of thermal panels. The manufacturer indicates 50 years, which is possible with extremely accurate use. It should be borne in mind that such terms are forecasts of marketers. The products appeared on the market about 10 years ago, so it was not possible to check this judgment.
• For installation, you will need even walls or the frame bred to the level.

A cost-effective way to improve the visual appeal and energy efficiency of wooden home facades is with thermal panels. This article examines how these panels, made of cutting-edge insulating materials, serve to shield the wooden structure from the elements while also assisting in temperature regulation indoors. Readers will learn why thermal panels are becoming a popular option for homeowners wishing to update the exterior of their wooden homes in an economical and sustainable manner by looking at their installation procedure and advantages.

Types of thermal panels: which one to choose

Thermal panels come in a variety of varieties. You must take into account what they are in order to make the best decision.

Plastic

Heat is retained by the plastic’s air-filled cell design. Inserting products into one another is how these thermal panels are installed. Plastic panels can withstand low temperatures and moisture. Furthermore, they have a considerable amount of endurance.

The main drawback is that when the plastic burns, harmful fumes will be released. As a result, they are rarely used for residential purposes; instead, they are mostly for everyday use and warehouses.

Clay

When facing the facade, these thermal panels have a very striking appearance. They provide the house with qualitative insulation in addition to the external species. Clay is known for its ability to withstand low temperatures and moisture. Furthermore, solar radiation will not cause ceramics to lose their unique appearance. possess great durability and strength.

Clinker

The material has multiple layers. Only clinker and polystyrene foam are available as options. manufactured as a gear-edged, rectangular block. Although the material is pricey, it has a brilliant appearance and stands out for long-term functionality. In addition, thermal insulation indicators will get better in addition to the decoration. the sole component that the insulation is made of.

Fiber cement

Great choice for lining the house on a budget. consists of 90% cement and 10% fiberglass, plastic, or cellulose. This type of cladding is long-lasting and more resistant to temperature changes and solar radiation. A home equipped with these panels offers more comfortable living quarters. Rain and snow clean them, so there’s no need to wash them.

Metal

Aluminum and galvanized steel are used as materials for metal panels. Simple enough, products are planted on screws or nails. According to the developers, the products will last for roughly thirty years.

Note that the panels themselves are not shielded from the cold; the stated working temperature range is –50 +50 degrees. Using insulation is essential. Its metal panels are shielded from outside influences.

SIP panels

The insulation is situated between two wood plates that make up the structural-insulating panel. These plates are made to guarantee the device’s hardness. are distinguished by appropriate sound insulation and improved heat efficiency.

Due to the material’s ease of installation and lack of seasonal restrictions, builders opt for it when building private homes made of SIP panels. These homes can be constructed all year round.

The material’s increased fire hazard should be identified as one of the drawbacks. Additionally, the benefit is thought to obstruct airflow; for this reason, cottage ventilation systems should be considered during the design phase.

Sandwich panels

The panels share structural similarities with a range of earlier products. They also have three layers, but the top ones are composed of metal and have a heater within. Fiery resistance indicators rise as a result of the additional layer of drywall or stone wool being used.

Polyurethane

Air cavities filled with air will allow such products to achieve proper insulation and sound insulation parameters. able to function in temperatures between -70 and +120 degrees. Because polyurethane panels are so flexible, they are utilized in the design of curved surfaces. A low price guarantees significant distribution.

Wooden

One of the most popular tools for designers is wood panels. It can produce remarkable effects when used properly. Because wood is a flexible material, it can take on a variety of forms in panels. A standard lining is the most prevalent kind of wood paneling.

Composite

Aluminum and plastic are the primary materials used in the products under consideration. Here, too, the multi-layer rule is observed, which improves the properties of thermal insulation and noise reduction. Special paint is applied to the exterior; these panels come in a variety of color schemes. Expensive panels occasionally mimic the texture of both synthetic and natural materials. Comfort when operating such a building will be possible because the paintwork may have dirt-repellent qualities.

It is important to remember that the panels that are chosen will be in place for many years to come. The outer construction type and its resistance to external factors, such as heat, cold, sunlight, rain, and snow, are determined by them.

The dimensions and design of thermal panels

The three types of facade thermal panels—private, premature, and corner—are used to decorate the outside of the wood-framed house. Their combined measurements are 70 by 114.5, 70 by 64.5, 70 by 24.5, and 70 by 26.5 cm. There are two types of designs: two-layer and three-layer.

Two -layer panels

Two-layer thermal panels are thought to be the most reasonably priced type of this material. Extruded polystyrene foam will serve as the foundation, onto which decorative elements are adhered. The insulation will come directly from the structure’s rigidity.

About 15 years will pass during the course of the operation (assuming no outside influences). There is a chance of deformation because the material is exposed to an aggressive environment.

Crucial! Thermal panels are extremely dangerous because they quickly spread during a fire, which causes a lot of caustic smoke to be released.

Three -layer panels

Three-layer panels offer a lot of benefits. Since an OSP panel serves as the foundation, the material’s dependability is significantly increased. There is a polyurethane foam in the center, which has enough density and strength. The presence of locks encircling the thermal panel helps to avoid the formation of cold bridges. Such products have better insulating qualities than two-layer ones.

The finish layer

Panels with two or three layers feature a finish layer. These are mostly polymers made of acrylic or glazed clinker. Each choice stands out due to its lengthy lifespan, ease of atmospheric effect transfer, and brilliant appearance. However, the clinker still looks richer and more natural, so it costs more.

Crucial! Thermal panels are filled with a special paste of the same shade to cover the interpanel seams for plaster. If you don’t look closely, the coating is monolithic.

Installation of thermal panels on a wooden house

Similar to many contemporary building materials, panels can be mounted on the wall or in a frame. The second option will be the best way to install such a material. It is not always possible, though; for instance, mounting the frame is best when there is a large amount of wall deviation from level.

• Installation without a frame. Can only be carried out if there is a flat wall surface. The meaning of this method of installation implies that the thermalpanel is nailed to the brick wall by means of dowels through the openings made by the developer.
• Installation with the frame. It is carried out almost in the same way, but the panels are screwed or nailed to load -bearing beams. The difference is insignificant, except for the possibility of leveling the surface of the walls, the frame does not give anything. It is possible to say that with the type of installation of the frame, the frame is harmful. In the space between the panel and the wall, the air circulates, takes heat from the home – directly because after fastening 1 row this cavity is sealed using constructionpen.

The remaining finishing tasks are completed in the same manner as the other building supplies.

The edge of thermal panels is open, revealing the bare heater substrate. They use dowels to accomplish mechanical fixation in these areas. Furthermore, EEPS glue, which is used for wet facade arrangement, is used to secure the panels. To shut the mixture with the required amount of water, glue must be prepared according to the directions. Thermal panel installation for a wooden house:

• The product is trying on dry and holes are prepared at the place of fixation of dowels.
• The thermal panel is removed and glue is applied to the ends of the insulation, observing the thickness of 2–2.5 cm.
• Large clods are applied to the inside of the tiles, which protrude from the downs.
• The glue is applied with a continuous layer to the main part and rubbed in one direction with a comb with a tooth pitch of 1–1.5 cm.
• The panel is applied to the installation site and mechanical fasteners are made.
• Strongly, however, the thermalpanel is evenly crushed directly to the wall. It is necessary to ensure that the glue appears along the contour of the heater.
• Applying a long rule, the product is aligned in relation to adjacent elements and a control cord.
• The thermal panel is tapped using a wooden bar: in a place where a muffled boorish sound is heard the glue, it should not be attached to the base of the wall. Therefore, the product under consideration needs to be crushed a little denser.
• Spit -out nails clog in dowels.
• The excessive amount of glue is removed and the installation of the subsequent panel begins.

Crucial! A foothold forms the corners when the finish is typed from in-line thermal panels, and a 45-degree diamond circle grinder is used to cut the products. Simultaneously, the dialing displacement must be initially set such that the remaining tiles in the corner make up at least one-third of the original length.

Оогда клей οросох окончательно патираятся межплиточные швы (иногда для этого требуется 35–40 часов). The basic facade plaster is used for these purposes, and it is painted the desired color using a dispersal pigment. Because plaster is hydrophobic, it effectively keeps water from penetrating the thermal panel substrate.

The grout is applied in the following manner: first, a dense bag with an angle cut is used to introduce the material into the seam. Next, the brick masonry residues are pressed firmly and removed, leaving behind any leftover residue. The finish is thoroughly cleaned with water, soap, and a brush a few hours after the grout has ended in order to stop future height formation.

A contemporary way to improve the visual appeal and energy efficiency of wooden home facades is with thermal panels. These panels address both the functional and aesthetic aspects of home design by fusing insulating qualities with a range of finishes.

The capacity of thermal panels to greatly enhance the thermal performance of wooden houses is one of its main advantages. These panels help homeowners save money on energy bills while maintaining a cozy interior climate all year round by minimizing heat loss through the walls.

Additionally, thermal panels are available in a multitude of designs and hues, giving homeowners the ability to personalize the outside look of their wooden homes. This adaptability not only improves curb appeal but also goes well with both traditional and modern architectural designs.

Thermal panels are also a feasible option for both new construction and renovations because of their relatively simple installation process. Because of its simplicity of installation, homeowners experience less disturbance and the project is completed quickly.

To sum up, the application of thermal panels to the exterior of wooden houses is a tasteful combination of improved aesthetics and energy efficiency. For homeowners looking to update the exterior of their wooden homes, these panels present an appealing option because of their many design options, ease of installation, and insulating qualities.

Video on the topic

Types of facing thermal panels of a wooden house

Installation of thermal panels Feldhaus Klinker. Suture a wooden house from a bar

Installation of thermal panels on a wooden house