The use of cement-license plaster for facades

For external facades, cement-lime plaster is a flexible option that is admired for both its strength and beauty. When applied to the exterior of buildings, this mixture—which consists of cement, lime, sand, and water—forms a durable, weather-resistant coating. It gives any structure a uniform, smooth finish that improves its appearance.

The resilience of cement-lime plaster to different weather conditions is one of its main advantages. It ensures the long-term structural integrity of buildings by shielding them from sunlight, wind, and rain. Because of the composition of the plaster, it breathes, which keeps moisture from building up inside walls and lowers the chance of mold or mildew.

Because of its aesthetic versatility, cement-lime plaster is a popular choice among architects and designers. It can be smooth or textured, and because of how well pigments adhere to it, a multitude of color options are available to accommodate various architectural preferences and styles. Cement-lime plaster offers an elegant, timeless finish that is suitable for both historic building restoration and modern facade creation.

The advantages and disadvantages of cement-lime plaster

Cement-license plaster has benefits and drawbacks as a building material for installation, maintenance, and building projects.

Benefits of plaster application:

• The material may turn out to be different qualities if the components are mixed in the ratio and proportions, depending on the requirements in the instructions. You can change the number of components in greater or lesser.
• The plaster can be applied on the surface due to the viscous consistency and the “stickiness” property, while the surfaces can maintain high adhesion properties to the basis of building material.
• The specially designed composition stops the growth and development of microflora on the surfaces.
• A reliable base can stop the increase in humidity in the room.

The following are drawbacks of cement-lime plaster:

• Unfortunately, the cost of reliable building material will be high.
• The material has a low level of compression strength.
• Plaster can be fragile with even small mechanical influences.

How to prepare a mixture for the facade?

It is thought that the most prevalent kind of this kind of material is cement-lime plaster. To get the mixture, apply:

It is important to note that astringent brands are not allowed to fall below the M300 threshold. The coating’s intended use directly affects the cement’s strength. The amount of sand added to the mixture determines its hardness and fortress.

Plaster with a cement base provides a strong and adaptable way to improve home facades. Because of the cement, sand, and additives in its composition, it offers strong resistance to weather conditions and permits a variety of decorative finishes. Cement-based plaster complements a variety of architectural styles and can be tinted to match any desired color scheme. Its smooth or textured surface can be used for both traditional and modern aesthetics. In addition to being aesthetically pleasing, this kind of plaster is prized for its durability and low upkeep needs, which makes it a sensible option for homeowners wishing to enhance the external appearance and longevity of their homes.

Preparation of the surface for applying cement-lending plaster

Selecting the application and kneading technique should be done right at the start of the plaster preparation work. Plaster can be applied mechanically or manually when performing construction or repair work with this material.

With the mechanical method, specialized tools are used. Furthermore, the master expends less time, energy, and effort, and the work is completed more quickly. However, there are situations in life when it is not possible to apply the mechanical method. Special tools can be used to complete the manual method:

It is sometimes advisable to use additional equipment in order to reduce the energy consumption of the mixing process. For instance, mixers, building mixers, and electric drills with customized nozzles.

To make a purchase, all calculations must be completed before beginning work. The application technique and the anticipated number of layers directly affect the amount of material. The application of even coating can be done mechanically, but it also requires more expensive building materials.

Consumption is also influenced by the standards set forth and the quality.

However, the consumption can be several times higher than when performing surface processing if you intend to use the plaster as a sealant.

The state of surfaces should be taken into consideration when performing calculations. In the event that unprocessed walls are being worked on during the new construction, a second layer will be needed to process the surfaces.

Holes and cracks that are present on the room’s surfaces should be leveled before any preparatory work begins. If unanticipated circumstances occur, consumption will rise.

It is vital to remove coatings from surfaces, such as the previous layer of plaster or other material, during the first stage.

The alignment and primer procedure then takes place.

When the substance is mixed with concrete, the process happens fast. However, if the coating is made of foam blocks, you should install a grid first before applying plaster that lends itself to cement. You may use a thin wire-based mountain ash.

Screws are used to install the grid, or if dowels are not available, screws with screws inserted into the walls. To ensure durability and strength, the material should be affixed either in the center or around the outside.

If the surfaces were primed initially, you will require it after it dries.

Lighthouses are erected on the surface following the process.

Installation of plaster beacons

Lighthouses give you the ability to level surfaces while requiring little effort or energy.

The same composition solution used to make plaster is also used to create lighthouses. However, aluminum profiles are a viable option. Leveling lighthouses is necessary to ensure that the glue matches the plaster. The plaster layer’s width and the side of the profile’s level match.

The room’s dimensions are used to determine the beacons’ separation from one another.

Cement-lime plaster is a flexible way to improve both the external appearance and functionality of home facades. Its composition, which is usually composed of cement, lime, and occasionally sand or other additives, gives it durability and resistance to weathering. This kind of plaster is well-known for its resilience to different weather patterns, offering defense against moisture, ultraviolet rays, and temperature changes.

Cement-lime plaster’s versatility in accommodating various architectural styles and design preferences is one of its main benefits. It may change the exterior appearance of a house, whether it is applied with a smooth finish for a modern appearance or textured for a rustic appeal. Because finishes are so customizable, homeowners can create a unique look that blends in with the overall style of their home.

Cement-lime plaster enhances the facade’s longevity in addition to its visual appeal. It creates a strong shield against elements that could eventually erode the building’s exterior. Over time, this durability lowers maintenance requirements and lengthens the facade’s lifespan, making it a financially wise decision.

Additionally, cement-lime plaster can be applied easily, which makes it a good choice for both new construction and remodeling. Professionals with the necessary skills can apply it effectively, guaranteeing a uniform and smooth finish that improves the house’s curb appeal. Its versatility and ease of use are enhanced by its compatibility with different substrates.

To sum up, cement-lime plaster is a dependable choice for beautifying and safeguarding home exteriors. The combination of its strength, style adaptability, and ease of installation makes it a popular option for both architects and homeowners. Regardless of the style preference—contemporary or traditional—this kind of plaster provides a strong finish that improves residential buildings’ aesthetic appeal and structural soundness.

Video on the topic

lime plaster how to do it

Lime plaster baumit / how to plastered walls from aerated concrete

Another argument in favor of adding lime to plaster

Mep-y Cement-lime light plaster with perlite

How to make a lime cement mortar