The standard size of white silicate brick: length, width, height

The choice of materials is very important for both functionality and aesthetics when building or remodeling a home. White silicate brick is one such material that is becoming more and more popular. White silicate brick, which has a sleek, contemporary appearance and is known for being durable and low maintenance, is popular.

For both architects and builders as well as homeowners, it is imperative to comprehend the standard sizes of white silicate brick. White silicate bricks are usually available in uniform sizes to guarantee their compatibility and convenience of use in building projects. The length, width, and height of these measurements are essential for organizing and carrying out any facade or structural design.

White silicate brick’s standard size varies slightly based on manufacturing specifications and local norms. A typical white silicate brick measures approximately 240 mm in length and 115 mm in width. These bricks have an average height of 71 mm. These measurements are intended to make it easier to handle and lay the materials during construction, guaranteeing accuracy and efficiency when creating walls and facades.

White silicate bricks are frequently preferred by architects and builders due to their weather resistance and thermal insulation qualities in addition to their size. These bricks can be used for both interior and exterior applications because they are designed to withstand a variety of environmental conditions. Their consistent size and form give any architectural design a tidy and well-organized appearance that improves its visual appeal.

Length	230 mm
Width	100 mm
Height	71 mm

The dimensions of white silicate brick

As per the state standard, the abbreviation 1NF indicates classic dimensions. Considering the thickness of the dressing, it is thought to be the most popular and frequently purchased. It is crucial to use this indicator when building load-bearing walls. White brick dimensions are standard, and its form is identified by the following parties’ comparison:

• The length of the beam (spoon area) is 250 millimeters;
• The width of the beam (poke area) is 120 millimeters;
• height (thickness) 65 millimeters.

The consumption will be more than 500 bars per cubic meter of masonry (standard size and type). There are beams on the market with a full and hollow structure as well. The first multiple’s mass was three and a half kilograms; the second’s mass was two kilograms of one hundred grams.

White brick size in centimeters

One-and-a-half-sized brouses are used to guarantee rapid masonry. Briket 1.4NF has the following measurements: d/sh/B = 25*12*88 mm. Over 370 briquettes of a specific size make up one meter of cubic masonry. high-tech in addition to a void-filled stone. The first weighs five kilograms, and the second weighs four.

Block two. Masonry can be completed quickly and effectively with 2.1NF. This stone is silicate-based and measures 250*120*138 mm in d/sh/in. According to how the material is characterized, the two stones in the classical structure are the same. A masonry cubic meter holds roughly 250 double bars. high-tech in addition to a void-filled stone. The first weighs about 7.8 kg, while the second weighs more than 6.5 kg.

The sizes of bricks of standard white and other types

The following categories’ bars are not as well-liked:

• Euro (0.7NF). D/W/B: 250*85*65 mm;
• With a single module (1.3NF) d/sh/c: 288* 138* 65 mm, products in shape resemble a wedge, which is used to build ardors and arched arcs.

The bars’ dimensions shouldn’t always be exact. Here, the smallest d/a/V errors up to three millimeters are permitted. Weight discrepancies can occasionally range up to 5 mm. This is a result of the production process’s silicate-based absorption of the mixture. Real estate is going to be long-lasting and sustainable if standard briquettes were used in the building process.

The standard dimensions of white brick

The white facing brick’s size should always be considered. This indicator is computed prior to work commencing. Benefits include the material’s resistance to temperature changes and its environmental friendliness due to its natural component composition. All of this can be added at a reasonable cost when compared to the ceramic equivalent. That being said, the material is not able to claim any resistance to high temperatures. He cannot tolerate the indication rising above 450 degrees.

The material’s resistance to water does not set it apart. When laying areas for bathing and other items that will come into contact with moisture, it is not advised to use it. However, the material has a pleasant temperature jump. In cities with windy and icy cyclones, it is used to construct real estate.

The most often used and purchased building material is silicate-based barn. For the purpose of ensuring that the houses are constructed in a sequential manner, building material and bar companies must follow the specified dimensions. State standards have been established for all kinds of bars and materials. When building houses, if every company had followed its own plan and dimensions without considering the classical norms, there would have been a commotion that would have surely resulted in the destruction of houses, partitions, and supporting structures.

The updated format (NF) of the bar was stipulated in a single rule that was established in the 27th century in the CIS countries; all other dimensions are regarded as classics.

The current dimensions of the building materials must be considered during the calculating stage of the facility design. Any time during the construction process, the dimensions of the bars are multiplied by the thickness of the supporting structures. Remember to consider the binder emulsion ball’s thickness. As a result, at every stage of the creation of a white bar, compliance with the regulations is required.

The building made of white bricks has the following dimensions:

• 2 The longest sides – “bed”;
• 2 medium sides – “spoon”;
• 2 minimum sides – "poke".

The "functional" area of the bar is the "bed," regardless of the work methodology used.

Traditional is one bar (1NF), d/w/in. It measures 25 by 12 by 6.5 centimeters. Using the material both across and along the masonry is made convenient by its specificity. Many bars will be improved, and the structure will be strengthened. One cubic meter of walls made from single bars requires more than 500 units of material.

Apart from the aforementioned indicators, materials with these dimensions are produced:

• Brick one and a half white size (its coefficient is not 1.5, and 1.4NF);
• double. It is often called a stone, because this name is spelled out in domestic standards.

In reference to a single bar, its height is the only variable that results in a one and a half double shape (that is, the lengthening of the area between the “spoon” and “pik”). The "bed" indicator and its dimensions remain unchanged at the same time. As per d/sh/in, one and a half bar, measuring 25*12*8.8 cm. Because it is made with voids, the masons’ robot is made easier to use because the other materials’ combined weight will be close to 5 kg.

Double block, 25*12*13.8 cm, in accordance with d/sh/V B. Given the thickness of the ball’s pantry, its volumes are equivalent to those of two single building materials. More than seven kilograms of brush weight. Per meter, more than 250 pieces are used. Since voids are typically used to make it, its weight is reduced to kilograms.

Classic sizes and scope of application

Building materials, which are actively used in the construction of supporting structures, are the bar that is taken into consideration in this article. He employs for building arched arcs and cylindrical pillars. The product is assigned to it based on its needs, and its life is doubled. Therefore, supporting structures fall under the sustainable category. For instance, there are no restrictions on the foundation’s life because it is based on bars.

However, the bar stands out from other analogs thanks to its precise, predetermined dimensions and natural outside data.

Standard technology is used to create the white block. This is accomplished by using a silicate base in conjunction with mineral additives, calcium oxide, and naturally occurring sandy sand. The bar’s environmental friendliness is its key benefit.

The bar in question stands out due to its ability to insulate sound, which lets you construct supporting structures out of it. Silicate-based bars outperform their ceramic counterparts by a wide margin. This is because of their advantageous traits:

• set strength, as well as resistance to minus temperatures;
• undemanding;
• maximum stability;
• Large range and types of shades.

That being said, the white block has drawbacks just like any other building material. When comparing the material to a ceramic analogue, for instance, the former stands out due to its lower degree of resistance to enlarged thermometers and water droplets.

Both full-bodied and hollow materials are used in the building of houses. The latter are distinguished by their highest heat-insulating properties, which focus heat energy. To lessen the force on the basis, they are utilized in the construction of houses.

In different kinds of bars, the percentage of voids frequently varies. Food grade fourteen is characterized by higher heat conductivity, with thirty percent of voids. It is utilized for masonry as a result.

It is evident what the white borus’s primary benefit is. The same qualities of sound and heat insulation set apart even the supporting constructions of the minimum thickness lined in a single ball. They are frequently contrasted with thick ceramic materials arranged in multiple rows.

Mass and dimensions of a white silicate bar according to the state standard

The dimensions and established forms dictate that the silicate bar has a rectangular shape. A white silicate bar’s traditional sizes are modified in accordance with the state standard. It is forbidden to make even small changes during any phase of the production process. This holds true for the material’s actual form. Depending on the kind and intended use, the bars may come in different sizes and weights.

There are seven classes of bars based on technical regulations that have been approved for public order. Comparing hollow materials to dense materials of the same class, hollow materials are lighter and have a more affordable price point. The dimensions of a white 1.5-inch silicate brick, or a thickened complete brick, are 250 by 120 by 88 mm. Weight range: up to 5 kg approx. They are in high demand and frequently utilize bars that measure 250 by 120 by 138 mm. They are referred to as doubles and can weigh up to 8 kg on average.

The price of silicate white brick

White silicate brick

Video – silicate brick: its pros and cons of

During construction, a number of silicate bar characteristics should be considered. The primary element consists of the mass to volume ratio of the bar. The bars are separated into two categories: dense, which weighs more than 1,500 kg per cubic meter, and porous, which weighs less than 1,500 kg per cubic meter. This is done to help you ignore the specifics, which are listed separately in the section "White brick sizes GOST." Six types of bars are identified based on density criteria. The Latin M and a digital indicator ranging from 70 to 300 specify these types.

At the point of bar rupture and tightening, the strength of the strength is ascertained. The block loses a lot of strength if it becomes saturated with water. The next step is resistance to thermometer F’s minus indicators, which represent the average cycle of freezing and thawing bars. The material will no longer be suitable for use after the predetermined number of phases.

The number is approximately 15 phases for internal walls, arches, and partitions; it is 100 phases for front walls, columns, and other products that are constantly in contact with atmospheric cycles. The ecology of the bar is impacted when the number of phases FAZ is doubled or more by the addition of modern chemical components.

The bar has the capacity to keep hot. The density and method of production have an impact on this indicator. A hollow bar’s average thermal conductivity is between 0.56 and 0.9 W/ms. More significant indicators, 0.67-8.90 W/ms, set apart holistic blocks. The state standards stipulate that no more than six percent should be absorbed by moisture and water droplets at the bar; however, this indicator is more than twice that amount. Depending on how many pores are available.

Dimensions and types of white brick

The white bar is split into two types as intended. They are up against an ordinary and a bar for cladding. The latter is typically made in white; the customer chooses the shade of the facing wood based on personal preferences. The typical kind of wood can be identified by its uneven surface, which makes it easier to apply glue and other gluing emulsions afterwards.

There are two types of bar structures: full-bodied and hollow. Their sizes and allowable percentage of emptiness differ, respectively. The physical attributes of the bars—their density, heat conductivity, and resistance to negative temperatures—are also taken into consideration when dividing them up.

While white silicate bricks vary slightly in size from manufacturer to manufacturer, they typically follow dimensions that guarantee consistency and ease of construction. The dimensions of these bricks are typically 250 millimeters long, 120 millimeters wide, and 88 millimeters high. In order to plan and execute facades, ensure compatibility with other building materials, and meet structural requirements, these dimensions are essential for architects and builders. Comprehending these standard sizes makes the design and construction processes more efficient and guarantees the longevity and visual appeal of buildings that use white silicate bricks.

The cost of a unit

Because silicate bars are so inexpensive, they are especially popular with construction companies and business owners. The material is not always inexpensive. Everything is dependent on the manufacturing processes, colors, sizes and types, and the nation and area where the bars are made. The price difference between the hollow and full-bodied options is roughly 2–7 rubles per piece.

Full-shaped Briket M-100 costs 5 rubles per piece, while M-250 costs 13 rubles per piece. A facing briquette’s price is 10 rubles per piece. It is important to keep in mind that, even with limited supplies, the price will always be significantly lower when purchasing in bulk. Don’t forget about loyalty programs and discounts, which are important for big construction companies.

Review of companies

The manufacturer considers the rules and the norms outlined in the state standard when determining the quality of all building materials. "Yaroslavl Silicature Brick Plant" is the nation’s most advanced manufacturer, having started operations on December 31, 2000. Customers purchase more than 100 million units of goods annually.

The factory’s laboratory continuously monitors quality and adds variety to the assortment, which is validated by international standards.

The Borsky Silicature Plant is another sizable manufacturer. The plant exports its products to every corner of the nation. High-quality and reasonably priced goods can be produced with the help of qualified specialists and imported equipment.

The scope of application

The silicate briquet’s dimensions, ideal thermal insulation indicators, and low mass have made it a popular material to use at any point during the construction of one- or multi-story buildings. A drop in load indicators serves as justification for this. In the event that the auxiliary real estate design has a ventilated facade, a complete analog replacement is performed.

Porous hollow bars are frequently used to adorn fences surrounding industrial facilities and summer cottages. Such a briquette is a suitable filler for the void created by the construction of monolithic real estate.

Buildings, garages, and residential cooperatives use type m of 100. For one-story residential buildings, M 150 is utilized, and M 50 is used for multi-story building construction. Preventing deformations or chips is crucial when transferring products to the designated location. To do this, specific pallets are utilized, and safety cables are used for dressing.

Features of masonry

The characteristics of silicate briquette-based masonry supporting structures precisely replicate similar technological principles for gas blocks and shells. In dressing with the previous ball, the briket is mounted. The purpose of this is to avoid joint coincidence. It’s crucial to follow step technology when laying the corners after the first ball has been laid.

Blocks are laid one after the other in accordance with the construction thread that is constructed starting from the two corners. They make up the future home’s ranks. Every formed row is compared to the horizon to determine the construction level. Remember the decomposition as well. The latter provides the required aesthetic appearance and is executed by the seams for the seams.

Prices for various types of cement

Cement

Video – masonry of silicate brick. Secrets of skill

The age of brick, is it time for him to retire

Out of a wide range of construction materials, the only materials that the briquette competes with are wood and stones. The use of briquettes is first documented in numerous ancient Asian writings. Briquettes were discovered by archaeologists while excavating ancient China and Mesopotamia. This material was extensively used by Byzantine, Greek, Roman, and Egyptian builders. Thus, even by the most basic calculations, its age surpasses the 10,000-year threshold.

Archaeologists can learn more about ancient times thanks to the initial attempts to determine the standard size of briquettes. The first Russian emperor and the last king of all Rus’ took this action in Russia. A bricket, measuring 280 by 140 by 70 mm, became the most important item with him. Back then, each master had unique standards that governed the process. It was feasible to attain even a bare minimum of unification.

A stigma was attached during the briquette-making process as a certification of complete adherence to the set standards. The masters, who aimed for retail sales and tried to lower the set sizes in order to save materials, were incensed by this policy.

Not only in the CIS countries but also in all of Europe, trends in the installation of briquettes of the specified size were followed until the turn of the 20th century. Manufacturers aimed to adhere to the prescribed guidelines, as inconsistencies not only complicated the design with small dimensions, but also made the object appear disproportionately heavy, which had an adverse effect on the stability of buildings. Simultaneously, European nations started utilizing multi-sized briquettes, contributing to the uniqueness and charm of the structures. You can use this to explain the wide range of materials shown below.

Types and sizes of ceramic briquettes in various countries

Briquettes are the most widely used product from the past century and today. Their sizes are expressed in centimeters using the international measurement system:

Cloister (28*13*8);

Saint Martin (28 * 13 * 7);

Say, the Little Monastery (28.5*13.5*8.5);

"50 module" (19*9*5);

"Rome’s Jewelry" (24*10*4).

Eight inches of "Goldstein" (19*9*4);

Inches (19.5*9.2*5); eight

WF expanded to 21*10*6.5;

Hut for monks (33*25*6.9).

Formal description (DNF) (22.8*10.8*5.5);

Convent dwelling (29* 14* 9).

DF thin bricket, dimensions 24*11.5*5.2;

Nine briquettes measuring 25*12*6.5;

(25* 12* 13.8) doubles.

Russian briquettes and their dimensions today

It wasn’t until the 27th year of the previous century that domestic briquettes took on their current look. The dimensions of a single ceramic briquette and its value in one and a half and double forms first surface a little later in regulatory documents. The introduction of conditional units of measurement for structural components and building materials—which, in the most recent versions of the state standard, started to be referred to as a module—finally approved this information.

It is still intriguing that the term "one and a half" cannot be verified through mathematical computations because it is 1.3 cm taller than a single one. This name was most frequently used by builders, and it subsequently started to appear in state regulations and standards. A silicate briquet, measuring 25 by 12 by 8.8 centimeters, is the size of the term in question.

Only in the 20th century, following a major modernization of industrial production in the field of building materials, was the building material first made from a combination of sand and lime. Subsequently, the process of half-dry press and autoclave burning was implemented. Users had no complaints about the materials’ size, price, or strength indicators, and they became more temperature- and moisture-resistant.

Today, it is only permissible to deviate from the specified standards when it comes to masonry briquette issues if the premises or supporting structures are decorated accordingly. Briquettes used for cladding have their parameters strictly regulated. The thickness of the boundary deviation can range from 2 mm to 4 mm. As a result, the White Briket’s sizes are strictly restricted and adhere to interstate regulations.

The use of briquette is subject to several limitations. Their decreased ability to withstand moisture makes them unsuitable for use in homes exposed to high levels of moisture (basement, basement, tap rooms) and extreme temperatures (furnace, chimney, and furnace capsules).

A lot of briquettes

The product’s size in sh/d determines the mass in full. The density, the presence of pores and voids, and the raw materials utilized to create the workpiece all have an impact on the indicator. Industrial testing revealed that the most problematic building materials are monolithic details—that is, details without any voids. These kinds of materials are frequently employed in the building of the support walls and foundation.

Products with voids are made to build secondary objects that don’t support the maximum weight. Twenty to fifty percent of the material is made up of air voids. As a result, these materials are frequently used as an extra layer that doubles the benefits of maintaining sound and heat insulation.

Numerous building materials differ based on the size of the briquettes.

Density class	Category	Mass, kg
Full -bodied		3.7
	One and a half	4.2-5
With voids	Single	3.2
	Double	5.7
	One and a half	3.7
With voids for cladding	Double	5-5.8
	One and a half	3.7-4.2

The information provided regarding the masonry briquette sizes leads us to the conclusion that hollow materials have maximum weight limitations, but with double or half-time standards.

A popular option for building facades, white silicate bricks are long-lasting, aesthetically pleasing, and low maintenance. When planning a building or renovation project, architects, builders, and homeowners must be aware of the standard sizes of these bricks.

White silicate bricks are generally available in a variety of standard sizes that ensure construction versatility in terms of length, width, and height. These bricks typically have dimensions of 250 mm in length, 120 mm in width, and 65 mm in height. These measurements enable effective handling and installation while offering stability and strength.

Builders value these standard sizes because they are consistent and predictable, making it easier to calculate how many bricks are needed and reducing waste during construction. Additionally, the uniform dimensions guarantee compatibility with conventional mortar joints, improving the facade’s overall appearance and structural integrity.

Comprehending these measurements facilitates the homeowners’ and designers’ ability to visualize the facade’s ultimate appearance. White silicate bricks are a timeless choice that go well with both traditional and modern architectural styles, whether they are used for new construction or renovations.

Video on the topic

Silicature brick paths, is it worth doing.

How much brick weighs

The sizes of silicate brick

The dimensions of the brick

Masonry of hollow silicate brick.