Sprayed foam insulation in the cylinders Polynor

Polynor cylinders, a type of sprayed foam insulation, provide a contemporary way to improve the comfort and energy efficiency of homes. With this cutting-edge insulation technique, a polyurethane foam mixture is sprayed directly onto surfaces, where it expands to form a seamless barrier that blocks drafts and heat loss. Sprayed foam provides a tight seal that reduces air leakage, in contrast to conventional insulation materials like fiberglass or cellulose, which are unable to perfectly conform to irregular shapes and contours.

Polynor cylinders’ broad range of applications is one of their main benefits. This technique guarantees uniform thermal performance across the building envelope whether it is applied to external walls, roofs, or even wall cavities. Because of the consistent insulation, interior temperatures are more stable, requiring less energy to heat or cool, which in turn results in lower energy costs.

In addition to providing thermal benefits, sprayed foam insulation helps to reduce noise transfer within and between rooms as well as outside noise. This additional acoustic barrier can greatly improve living areas’ tranquility, which makes it especially desirable for residences close to busy intersections or in noisy urban areas.

Possibility of using foam fillers

Bound thermal insulation has not been widely used in the past because of its high cost, even though it is superior to analogs in every way. Furthermore, the use of this insulation was restricted to situations requiring the use of specialized equipment, which is nearly impossible to obtain outside of the professional world due to its high cost and complex development. There was the use of mineral wool and polystyrene plates, which are made by an extrusion process; these are much more straightforward and profitable, though not always more convenient.

Then the producers started making the sprayed insulation in the compact-diameter cylinders, which brought down the price of the process. Since the material itself is rejected in small containers and can be sprayed manually, sophisticated installations and thermal insulation decoration experts are not required to spray such a mixture of steel. Every cylinder is made to cover a base area of one square meter and can have a layer as thick as 60 mm. In the daytime, one person can process up to one hundred squares.

Consequently, the computations demonstrated that operating a heater like Polynor is significantly more profitable in terms of labor expenses, material costs, and surface preparation. You will only need to spend roughly 500 rubles if the skilled team of workers requests insulation for one square of the wall up to a thousand and a half rubles. This can be achieved by using polynor insulation with a comparable amount of material. Working from home eliminates the need to hire inexperienced workers, speeds up completion, and saves money.

For individuals without specialized training, this kind of thermal insulation continues to be the best option. Foam can be used to insulate walls, basements, foundations, and outside walls of block, brick, stone, and concrete buildings. This alternative is also appropriate for napal roofs, attic floors, and unloaded coatings such as floors on lags.

Polynor can be used as reinforcement or thermal insulation for sewer and plumbing pipes because it can be applied to practically any material. Foam insulation in cylinders in rooms or open spaces can be used in these situations. The inability to use the material for non-disconnection of voids is the only limitation on the use of cylinder thermal insulation. It can only be applied to a dense base.

Similar to Polynor cylinders, sprayed foam insulation provides a flexible way to improve the exterior of homes. This article examines the ways in which Polynor’s foam insulation cylinders enhance structural integrity and energy efficiency. We’ll discuss how they are used to insulate walls and facades, emphasizing advantages like moisture control and thermal resistance. Find out how this cutting-edge approach to insulation lowers energy costs, enhances comfort, and supports sustainable building practices.

Pluses of thermal insulation with spraying

Sprayed Polynor insulation differs from sheet analogues in that it is easier to use, store, and transport, while also saving time and money on tools. Several other benefits are also typical for this material:

• minimum strength of strength (up to one hour);
• inappropriateness of destruction by insects and rodents;
• full surface coating without the formation of cold bridges;
• lack of harmful effects on humans and the environment;
• spraying without complex and expensive devices;
• vapor barrier of the base;
• A long duration of operation.

Strong heating and non-combation of the insulation ensure rapid fading and a high degree of fire safety.

The main technical indicators

Foamy thermal insulation is superior to regular insulation materials in every way because its technical properties are similar to those of industrial models sprayed with pneumatic units. The following positions are included in Polynor’s primary parameters:

• thermal conductivity in the range of 0.023−0.025 W/MK;
• The density of the material after hardening is more than 28 kg/m³;
• vapor barrier at the level of 70%, which is similar to Isospan B;
• Moisture absorption – up to 2% (immersion in water at a temperature of about +100 ºС for 1.5 hours);
• The maximum operation temperature is up to +121 ºC over the exposure time up to one year;
• The resource of the material without reducing technical characteristics – at least 50 years;
• Environmental purity and the possibility of use in residential premises.

In cylinders, sprayed thermal insulation can withstand mechanical deformations of up to 50% without losing its form or being destroyed.

The surfaces of brick, concrete buildings, metals (aluminum, cast iron, steel), and wood materials (plywood, board) can all be insulated with adhesion at a level of one to two and a half kilograms per centimeter. In this instance, the cylinders’ sprayed thermal insulation is resistant to both humidity and the effects of chemicals, such as oils, soap solutions, and organic solvents. Methyl chloride, dichloroetan, hydrochloric acid, and sulfur or nitric acid completely destroy the insulation’s structure, causing swelling.

The cylinder-shaped spray foam insulation from Polynor provides a flexible way to improve a home’s thermal efficiency. With its expanding foam, this technique fills even the smallest gaps and creates a seamless barrier against heat loss. Polynor insulation ensures complete coverage by molding itself to the specific shapes of walls and structures, enhancing comfort and energy efficiency.

One of Polynor foam insulation’s noteworthy advantages is its resistance to moisture, which aids in preventing the growth of mold and mildew inside walls. This resistance to moisture helps to improve indoor air quality while preserving the building’s structural integrity. In contrast to conventional insulation materials, Polynor’s closed-cell structure gives the building envelope a layer of longevity and durability that provides long-lasting weather protection.

In addition, the process of applying Polynor foam insulation is effective and causes the least amount of disturbance. When applied as a liquid, it quickly expands to fill voids and cavities and, after curing, sticks firmly to surfaces. This seamless application is a sustainable option for contemporary building and renovation projects because it minimizes waste and cuts down on installation time.

Video on the topic

Polynor performance of one cylinder (consumption)

The whole truth about Polinor insulation

Foam insulation Polinor in cylinders

Polynor. Sprayed insulation Polinor. How to use Polynor correctly

Comparison of the Polynor and mounting foam installation method

Polynor exit from one cylinder, removed in one double