Ship board – a good type of metal -luster for decoration of the facade

Ship board, also known as metal cladding, is a popular and adaptable material choice for improving the durability and aesthetic appeal of home facades. It is made up of metal panels that have the appearance of wooden ship boards, providing a distinctive fusion of contemporary style and rustic charm.

The outstanding durability of shipboard as a facade material is one of its main benefits. Because it is composed of durable metals like steel or aluminum, it won’t warp or fade over time even in the face of inclement weather, such as rain, wind, and UV exposure.

Shipboard is preferred due to its low maintenance requirements in addition to its durability. It doesn’t need to be painted or sealed on a regular basis like natural wood does in order to preserve its aesthetic and structural integrity. Because of this, it is a financially advantageous option in the long run and requires less regular maintenance.

Shipboard architecture allows for design flexibility. It can be positioned either vertically or horizontally, producing a variety of artistic effects, such as highlighting a building’s breadth or height. It also has a variety of colors and finishes, so homeowners can match the facade to the rest of the design of their house.

Preparation of the crate

Colelite is the system of planks that supports the siding’s canvas and is an essential component of the casing’s construction. The external wall insulation (if necessary) is installed concurrently with the crate installation.

Deals can be made with the wooden bars or metal guides that are used to install structures from GKL.

• Installation begins with the inspection of walls and eliminating the detected flaws – dents, cracks, etc.D. After installing the insulation, access to the wall surface will stop, so all the disadvantages must be eliminated in advance.
• The first layer (if there are two of them) the crate is installed horizontally (t.e. Related to the direction of the panels). The step of the strips is equal to the width of the insulation plates, which is tightly installed in the intervals. After completing the laying of the insulation and the installation of strips, it is required to ensure waterproofing a wall pie using a waterproofing membrane. She releases steam, but does not pass the moisture inside in any form.
• Then they start the installation of the second layer – the counterparty. It should be located perpendicular to the direction of the panels – vertically. The step of the counterparts for the counterparty should be 30-40 cm.

Crucial! Additional strips are installed around the windows and doorways and in the corners, to which the corner profile or platband will be attached. The labels are reinforced on the slanted window openings as well. According to the standards, the counterparty’s thickness must be at least 40 mm, which is equal to the ventilation gap’s value.

According to the standards, the counterparty’s thickness must be at least 40 mm, which is equal to the ventilation gap’s value.

Types of ship siding

There are two types of finishing material that mimic ship linings produced.

Metal panels

Steel that has been galvanized is used for siding. The protective and decorative layers that cover the metal from above provide the required texture and allow for moisture permeability. The protective coating’s thickness and the metal’s composition can vary amongst manufacturers.

Structure of side sidings

Applications can serve as a shield:

• Purala;
• glossy or matte polyester;
• PVDF;
• plastic insole.

The coloring option is selected using a standard RAL table.

Metal siding colors

Metal siding offers several benefits, including:

• It is durable, the stand for various mechanical influences.
• The strips have good geometry.
• The temperature range in which the finish can be operated: -60 …+80 degrees.
• The material does not support combustion.
• The coating has a low expansion coefficient.
• The decorative layer does not lose its external qualities for a long time.
• Siding is easily installed. Moreover, installation can be done year -round.
• Manufacturers are guaranteed the service life of at least two decades.
• The coating is not subject to decay, it is not of interest to pests.
• The cladding is easy to care.
• Variants of textures and color solutions offered by manufacturers make it possible to select the best option.

What makes the metal boat convenient is that its dimensions can be chosen to meet your needs.

Donistered home

However, there are a few drawbacks that need to be considered before selecting a decorating option:

A comparatively high cost; the panels’ heavy weight, which increases the strain on the structure and creates some installation challenges; dents that have become authenic as a result of negligence; the possibility of corrosion leading to harm to the product’s protective coating; The technique of TAME-SUBSTITITION for swapping out damaged planks.

It is necessary to work on heat and sound insulation when cladding a building with metal siding.

Metal siding has the following qualities:

• Steel thickness: 0.3 … 0.6 mm.
• The thickness of the protective and decorative coating: 25 μm.
• Profile height: 11.5 … 15 mm.
• The width of the panel: 255 … 263 mm.
• The length of the planks: 0.8 … 6 m (the most chassis – 4 m).

It doesn’t really matter if panels from different manufacturers differ in size by a few mm; instead, focus on the metal’s thickness. siding in a dark brown color

The Golden Oak model.

Wood-textured panels

On board the ship: dark metal

Wood-like metal panel

Plastic panels

These coatings are composed of PVC with additional ingredients that improve the material’s functionality:

• Vinyl siding protects the building well from the effects of precipitation and wind.
• He is biologically inert.
• The laminated layer allows you to protect the cladding from ultraviolet radiation, increases the stability of the material to low temperatures.
• Material – light, which facilitates installation work.
• The cost of plastic panels is significantly lower than metal analogues.
• Vinyl planks are available in a variety of colors.
• Siding – not toxic.
• The cladding does not burn, but only melts if the temperature reaches 400 degrees.
• Plastic is easily cleaned with a wet sponge.

Shades of plastic panel palette

A ventilated gap is formed during the installation of vinyl plastic cladding, allowing proper air flow circulation and lowering the likelihood of condensate formation.

• The decoration of buildings with vinyl requires the installation of a heat -insulating layer.
• Vinyl plastic is subject to damage due to inaccurate circulation. Replacing even one element is quite problematic, since the dismantling of the entire facing structure is necessary to the damaged part.
• Another disadvantage of polyvinyl chloride coatings is the temperature expansion, which entails the need to create compensation clearances.
• The appearance of plastic coatings loses compared to ship siding from steel, since there is no such variety of textures, especially imitating natural materials.

Shipboard siding is composed of coffee-colored polyvinyl chloride with a milky sheen.

Gray siding

Panels of salad colors

Ship siding made of plastic: Specifications

• Planes length: 3.0 … 3.8 m;
• width: 23 … 27 cm;
• The thickness of the ship siding: 0.7 … 1.2 mm;
• Profile height: 1.4 … 1.6 cm.

Preparation for installation

Rules for working with metal

It will be best to carry out installation by hand if you choose to sheathe your home with metal that is chained.I will issue a warning right away: installing this material independently is not impossible, but it will require work.

You must first determine the precise amount of metal luster you require. Using one of the online calculators found on the websites of numerous manufacturers of this material is the simplest way to determine the necessary quantity.

Constant components

• It is better to store purchased metal -bending in a room protected from exposure to precipitation. Try not to put anything on the metal panel panel – despite the metal base, it is very easy to deform, deforming on the floor.
• If the metal -bend was not cut into size when buying, you will also have to perform cutting. We carry out cutting metal -losying using a saber"s saw or electrician with a metal blade. It is better to cut from the edges on which perforation under the fasteners is applied.

Preparing the facade for installation

The most popular method for installing metal siding is metal bending, which allows for the configuration of a unique frame-crate inside the facade scheme.Here’s how the crate is constructed:

• For starters, we examine the facade, remove the crumbling facade plaster, climbing plants. We remove the brackets and other protruding elements.
• The walls that will be under metal -bending are treated with an antifungal composition.

• Then we proceed to marking under the crate of siding. If the siding is mounted vertically, then the main elements of the crate are installed horizontally and vice versa. In both cases, the step of the crate should be 300-400 mm.
• By marking, we begin to install brackets. As a bracket most often, suspensions for a metal profile are used. We fasten the bracket to the wall using an anchor bolt and bend it at an angle of 90.

Bolsterer fastening above brackets

• At this stage, external wall insulation is carried out. Holes that coincide with the location of the brackets are cut through the insulation plates. Thermal insulation material is attached on the walls and is necessarily overlapped by a windproof film on top.
• It is best to use a dowel-zone as a mounting of insulation.

Dowel-zone fastening of the insulation

The primary crate profiles are fastened to the brackets. You can use a galvanized steel profile and 40×40 mm wooden bars to create a metal-bending crate. The low moisture content of the tree is the primary requirement for a wooden crate.

Putting the crate together You can begin the casing itself as soon as the crate is prepared.

The facade of the facade with metal -bending

The metal -losying’s installation plan is very basic:

We attach the corner components to the crate’s corners. We position the element, level it, and use self-tapping screws to secure it to the crate.

Embellished angle

• Installation of metal panels start from below. In the lower part of the building (or immediately above the basement) we install the initial bar. Having leveled the initial bar with the help of the level, we begin to fix it to the crate.
• For fastening, we use screws (on wood or on metal – depending on the material of the crate). Self-tapping screws are screwed exactly into the center of the fasteners, and not to the end-a gap of 0.5-1 mm leaves a metal-chairing space enough to compensate for possible deformations. How to fix the panels correctly – shown in the video.
• Next, we begin to collect and fix the main panels. If the length of the panels is not enough to sheathe the entire building entirely, we install the so -called docking grounds. It is better to fix the long panels, starting from the center and gradually twisting screws closer to the edges.

Restoring the luster of metal

Along with mounting window sills, castings, and butt strips, platbands and slopes finish the installation by obstructing the space between the facade and the roof. Naturally, the directions provided in this article for installing metal chairs are only suggestions; you may need to modify them based on the particular siding model and the features of your home. However, its fundamental assumptions stay the same, and if you follow them, the outcome will be just what you require!

"Ship board" – what it is?

Siding looks like wooden upholstery with the boards overlapping one another. The outer type of panels very closely resembles the structure of the varnished wood because of the special production technology. Disparities are only apparent when closely examined. Siding "Ship board" is used for a variety of reasons, including: • fire safety; • a wide range of colors, shades, and textures; • a relatively low cost of material; • high resistance to mechanical effects due to the presence of additional ribs of stiffness; and • the possibility of creating a durable and sealed casing that protects the structure from atmospheric precipitation.

A concealed panel mounting technique gives the impression of a continuous facade coating. A lengthy service life of up to 50 years is another major benefit of the "shipboard."

Fields of use

The purpose of siding, also known as "ship board," is to insulate and safeguard the supporting walls of commercial, residential, and office buildings. The principal uses are for the horizontal sheathing of single- and multi-story buildings and for historic building facade restoration. Since the panels fall under the category of non-combustible building materials, they can be used in fuel warehouses and gas stations, which are high-risk areas for fires.

Main characteristics

This kind of siding is composed of metal profiles that have a polymer film applied to their surface to protect it from corrosion and maintain its external appearance. Double-sided galvanizing is applied to the steel base, and various coatings are applied, including primer, varnish, decorative, polymer, and anti-corrosion oxide film. For sealed skin mounting, the panels have a perforated edge and a unique lock lock. The metal and polymer coating’s composition and thickness have a significant impact on the material’s durability and ability to withstand external influences.

Experts significantly improved the geometry and qualitative characteristics of the Metal Side "shipboard". Since the thickness of the metal is the basis of the strength, for the manufacture of siding, we use the material 0.5 mm thick, thereby increasing the stiffness of the structure. Due to the increase in the height of the bend to 15 mm, the stiffness and strength of the product is significantly increased. The displacement of the stiffeners to the middle part of the panel wave allowed to reduce the area of ​​the wide shelf and reduce the possibility of its deformation. Our products can be used in climatic zones with the most difficult weather conditions, since due to a low thermal expansion coefficient, the temperature use range is from -50 to +70 ° C.

Varieties of "shipboard"

Manufacturers now provide vinyl and metal panel options. Because vinyl siding is lightweight and has a low heat conductivity, the foundation and walls’ bearing capacities do not need to be determined. Durable materials are resistant to UV rays, mechanical stress, and temperature deformation. The panel’s laminated surface prolongs the coating’s life and keeps it from fading.

While the Metal Silence Board is made of natural materials just like any other, it is not susceptible to insect infestation or rot, which would otherwise destroy the tree’s structure. The protective properties of panels under unfavorable weather conditions are greatly enhanced by polymer coating.

Features of choice

Before buying Siding “Ship Binding”, you need to get acquainted with the characteristics and parameters of the proposed material, as well as with: • The same coating is used to protect the metal base; • thickness of the coating; • Assortment of color palette; • operating conditions and the difficulty of caring for panels; • Complement with additional materials and fasteners. Krovelson offers residents and construction companies of Orenburg and the Orenburg Region high -quality and durable siding made of Russian metal. There are a wide selection of colors and shades of panels covered with polyester. Also, the work uses high -tech methods that allow you to get a matte textured surface, and the modern multilayer Printech technology for applying various images imitating stone, brick or wood. Our products are equipped with the necessary additional elements of their own production for decorating cornices, castings, corners of buildings and windows.

Positive properties of metal -losying

Numerous benefits and favorable attributes of metal beneath the tree have increased demand for its application in exterior wall decoration for buildings:

• Siding does not burn, the interaction with it does not cause toxic poisoning in a person, when heated, for example, the sun, the panels do not secrete harmful substances and chemical compounds;
• Under the influence of high and low atmospheric temperatures, the material does not change external qualities, has a small degree of corrosion, cracks from adverse factors do not appear on the surface;
• The decoration of the walls of metal -luster does not require painstaking care, when polluting with dust, the coating is washed with water under the pressure of the hose, after which the facade gets an attractive look;
• It is not required to paint the surface or other update, the metal -bending looks great on the surface of the house for many years;
• In the construction market, manufacturers provided many wood structures in appearance, which differ in terms of texture, color, imitate a different shape of boards or logs;
• On average, the operational period of the material is measured for 30 years, the polyurethane coating extends the operating time up to 50 years, and the polyester layer lasts about 25 years.

A practical and attractive metal cladding choice for improving the external appearance of residential and commercial structures is ship board. Ship board, which is well-known for its toughness and contemporary style, gives a shiny, metallic sheen that goes well with a variety of architectural designs. It can greatly improve any structure’s curb appeal in addition to offering protection from the elements and a modern aesthetic. This kind of cladding is well-liked for being simple to install and maintain, which makes it a sensible option for builders and homeowners aiming to create a chic facade that endures.

Wall crate for siding

It is recommended to mount the facing panels on a pre-installed crate. Wooden bars or metal profiles can be used to construct the crate.

When using wooden guides, make sure they are dry, treated with a special method to prevent mold, fungus, and beetles, and covered with a moisture-resistant coating.

The most common application for metal siding is in profiles made of metal because they are strong, durable, and don’t need extra processing to withstand loads more consistently (metal bending has enough weight).

Bars with a 5 x 5 cm cross section should be used for a wooden crate. It is acceptable to use a metal profile for the installation of drywall to create a metal crate.

Starting from the corners and working our way down to the lower and upper guides, the crate is installed.

The orientation of the frame lines for siding is decided by how the panels are laid: if the panels are placed vertically, the guides are positioned horizontally, and if the panels are laid horizontally, the crate is assembled vertically. It is advised to space the crate’s steps between 30 and 50 centimeters.

The bar’s windows (or the metal profile) are positioned near the windows. A crate is performed around the doorways in a similar manner.

It is advised to place the insulation beneath metal bending because it improves sound insulation and decreases heat loss. Thus, the insulation is laid following the completion of the crate.

A few words about the burnout of the material

In fact, the question of whether siding—even the best kind, which is frequently determined by private home owners—is burning out. Indeed, sunlight causes siding to actually become lighter. Many people view this as the material’s primary flaw, but you should determine how the siding is burned out before assessing the decoration’s quality based solely on this indicator.

Superior siding consistently fades uniformly and gradually; this process is imperceptible to the naked eye. The only way the siding-covered house will differ is if an addition is added in a few years and the siding is exactly the same. The first will have multiple tones of lighter tone. For this reason, it is advised that the entire building be taken possession right away, rather than delaying the process for a few months or a year.

Siding for walls

What causes the differences in siding burnout? It all comes down to titanium dioxide, which is utilized in the siding-making process. Much more is used, even in the production of high-quality material of this substance.

One more instance of low-quality siding

It’s time to research the various siding options. This will assist in selecting the appropriate finishing material.

Types of siding

Due to the wide range of color solutions in the dolomite lining, it is customary to classify the material by color using the following principle:

• With painted or without painted seams;
• Exclusive colors (cappuccino, agate, granite).

Furthermore, there are distinct series of panels that can vary from one another in terms of size as well as color:

• Rocky Reef Lux. Two -meter panels with imitation of natural shale. A feature of repeated painting panels in the furnace using the technology of burning the pattern provides the quality of the material. In addition, in this series, side mounts are used in which the connecting bar is not needed, which ensures the absence of joints of joints;
• Rocky rif premium. The panels are two -meter. Characteristics of painting – dullness. This series represents the colors of terracotta, safari, chestnut, dune and graphite. Fastening similar to the sheets of the series Rocky Reef Lux;
• Kuban sandstone. The texture of the panels represents the type of stones resembling sandstone, and staining occurs in such a way that the material does not scratch, does not peel off. Sheets are attached without a profile using the lower and upper thorns included in the nests;
• Dolomite painted. Differs in the expressiveness of the texture, painted seams. Imitates masonry masonry of cement mortar. The joints of the side seams require sealing with accessories;
• Exclusive dolomite. Differs in color options for granite and agate. Special technology of repeated coloring, giving a rich gray color with overflows, differs in mixing colors. It is advisable to choose the facing materials of this series if the building is located in the roadway or places with increased pollution;
• Alpine. Option of imitation of stabbed stone. The panels of a rather uniform texture, similar to stones equal in size, are executed in standard length;
• Alpine painted. Sheets with gray stained seams, decorated for masonry. Standard fastening, sheets with even edges;
• Shtetan. A series of standard textured sheets for slate. Has a standard, even side seams mount.
• Rockvin. Characterized by imitation of unique masonry, which consists of stones of different sizes. The randomness of the texture, the heterogeneous relief give individuality to three -meter sheets. For originality, the cost of the series is relatively low.

Apart from the primary facade series, the dolomite also releases wall series like Airside and Airside Scandinavian, which are suitable for the basement. The use of three-meter, 1800 mm-wide sheets is growing because they are high-quality and reasonably priced.

Interesting ideas

The building’s facade looks unique because of the way it combines various colors. Because of this, you can design something unique without worrying that it will look too similar.

Because the combination of colors on the walls and roofs is so eye-catching, it deserves a lot of attention.

Moreover, combining textures is an option. Next to Siding "under the stone" and "under the brick," smooth plates appear advantageous.

The building will gain an air of distinction and refinement from the combination of siding and facade panels.

The use of wooden singing sheathing will contribute to the room’s superior thermal insulation. Such material also has a low environmental impact. But in this instance, it’s important to remember to take prompt care of the panels.

You can arrange vertically to give the panel building a more intriguing and unique appearance. Although you can use the idea for large cottages, this will be a great option for low houses.

Furthermore, combining the vertical and horizontal panel installations will add even more uniqueness to the building.

The market for building supplies has an enormous selection of siding. Its design, texture, and color scheme can all differ. The panels are used to face multi-story buildings and one-story homes, and they can be used to line a space both inside and outside.

With these materials, you can unleash your creativity and realize the most audacious design concepts. The facade’s design could be fully or partially composed of a variety of hues and textures. Numerous elements will contribute to the building’s distinctive and original appearance. Most importantly, every project can be customized to expertly complete the work and satisfy the client for many years.

Watch the following video to learn how to finish the house with siding.

Architects and homeowners alike favor ship board as a type of metal cladding for facades because it combines aesthetic appeal with longevity. Any building, residential or commercial, gains visual appeal from its sleek, contemporary appearance. Shipboard’s sleek design and even surface give it a modern appearance that blends well with a variety of architectural motifs.

Shipboard’s resilience is one of its best qualities. Because it is constructed from premium metals like steel or aluminum, it has exceptional long-term durability and resistance to weather. Because of its longevity, the facade will look good and work well for many years with little upkeep, making it a wise investment for improving a building’s exterior.

Beyond its toughness, shipboard provides design flexibility. A variety of colors and finishes, ranging from glossy to matte, enable homeowners to customize their facade to suit their aesthetic tastes. Because of its adaptable design, ship board can be used with both traditional and modern structures, fitting in well with a variety of architectural motifs.

When compared to other facade materials, ship board offers both functional and aesthetic advantages, and it is also comparatively simple to install. Its modular panels and lightweight design make installation easier, cutting down on labor expenses and building time. Because of this, it is a desirable choice for new construction or renovation projects where cost and efficiency are essential.

All things considered, ship board is a great option for anyone wishing to add a strong, eye-catching, and adaptable metal cladding solution to the outside of their homes or buildings. Professionals and homeowners looking to achieve both practicality and style in facade design favor it for its blend of modern aesthetics, durability, and ease of installation.

Video on the topic

Siding shipboard (ship beam)

Metalsayding gray graphite on the facade. Video review of the finished object.

Metal -sidling Eurobrus.

Roading House with Metal Side "Ship board", matte walnut.