Method for applying plaster for a fur coat

Plastering a house’s facade, particularly for thermal insulation, requires a technique called the "fur coat" technique. This technique is essential for raising a building’s visual appeal and energy efficiency. Plaster protects the building from the elements and helps control indoor temperature by covering the external walls with a layer of protection.

The first step in the process is to prepare the surface by making sure it is smooth, clean, and devoid of any impurities that can impair adhesion. This preparation is essential because it makes sure the plaster sticks to the wall firmly and doesn’t break off in the future. Plaster application that is more uniform is also encouraged by proper surface preparation.

The base coat is then applied, usually with a mortar mixture that offers a sturdy base for the layers that follow. When evenly applied throughout the wall, this base coat helps to smooth out blemishes and provides a stable surface for the subsequent plaster layers. To guarantee the facade’s overall durability, this layer must be given enough time to cure.

The decorative plaster layer is applied after the base coat has dried. This layer enhances the facade’s aesthetic appeal while also assisting with thermal insulation. Depending on the desired aesthetic effect, it can be smooth or textured. Care must be taken to ensure an even finish. After application, plaster is typically allowed to cure and may need to be maintained on a regular basis to maintain its efficacy and appearance.

Types of plaster

Most of the time, the plaster’s composition is created separately by combining cement, sand, and water. Sometimes gypsum is utilized in place of cement. It is crucial to keep in mind that the surface will absorb moisture very strongly. You will need to paint the surface or apply an additional special composition in order to prevent this.

There are many different mixtures available today that are very different from those that were used in the past. They produce an elastic coating, last a lot longer, and are less expensive than other wall decoration options.

Although they cost more, finished acrylic mixtures are also available on the market.

Choosing to give up on the combination Having a discoloring impact It is important to remember that selecting the appropriate shade won’t be simple if there isn’t enough solution to cover the entire surface.

An acrylic copolymer is the primary ingredient in the mixture. Long service life and moisture resistance characterize silicone decor made of silicone and acrylic resins. For instance, Aura Puts’ plaster "fur coat" works well on any kind of surface:

The properties of decorative plaster

A finish coat is made using decorative textured plaster. It works well for both interior surface decoration and external building facade design. It’s frequently used to complete arches and borders. Such a coating has additional advantageous qualities in addition to its appealing appearance. The following are some benefits of a fur coat:

• peat -sounding properties;
• soundproofing qualities;
• protection of walls from destructive atmospheric phenomena;
• Ease of use, the finish can be done with your own hands;
• the possibility of easy restoration of damaged areas;
• aesthetic characteristics;
• affordable price.

Preparation for work and the necessary tools

There should be quick preparatory tasks completed before beginning work. You will have to examine the walls closely if the house is not brand-new. Once flaws and cracks have been identified, they must be closely examined before the surface is primed.

There is no need to use putty when working indoors. The old paint, wallpaper, and whitewash are removed from the walls, and any flaws and cracks are sealed. Any small dings and bruises will be covered up by the granular texture. Primers must be applied to the surface. It will be possible to move on to the decorating once the composition has dried.

There are various techniques for applying decorative plaster "fur coat." Every technique will require a unique tool:

• spatula and textured roller;
• stationary compressor;
• manual sprayer;
• Venik and stick.

We go through each step of the process in our comprehensive guide to applying plaster for a textured finish, so you can have a long-lasting and eye-catching exterior. We provide useful advice and insights that professionals and homeowners can use to improve the appearance and durability of their home facades, from surface preparation to selecting the appropriate tools and techniques. Knowing this technique will guarantee a beautiful, long-lasting finish whether you’re building from scratch or renovating.

Ways to apply coating

1. The mixture of a broom with a broom. This ancient way is used today. The broom is dipped in the solution and hit next to the wall with a wooden stick. The result of such actions are spray on the surface. This method requires experience and time.
2. Using wooden boards and brushes. The board is lowered into the solution. Then near the wall along the stubble in the inverted brush is carried out with a wooden plank. As a result, the surface of the wall is covered with the necessary spray.
3. Using a roller. With this method, applied with a thin layer of a damp solution to the wall surface. According to this solution, a textured roller is carried out, thus receiving a "pile". The negative point of this method is an uneven texture.
4. An expensive but fast way of wall decoration "fur coat": work using a compressor. With it, you can regulate the texture and uniformity of the coating.
5. The plaster with the help of a machine is performed with their own hands, but the result is no worse than when using a compressor. The machine is a tank filled with a mixture. There are metal plates inside the container. They, rotating, rest against the stop and form spray. Such work requires perseverance, but the result is a uniform and beautiful surface.
6. Method of plaster using a grid: quite old, but relevant today. A small mesh is required. It is pressed to the wall and the trowel is applied with a trowel. Having done all the manipulations, they remove the grid and get the desired layer of plaster.

Coloring

Dyes are typically present in dry plaster compounds. You can select your own shade for the finished plaster walls by using tinting paste. Standard is thought of as black and white.

Manufacturers now offer a wide range of tinting compositions to consumers. They can assist you in creating a distinctive color, such as:

The pre-plastered walls can be painted, however there are some drawbacks to this:

• Since the paint covers only the upper layer of plaster, the cracks that appear will be highlighted on the surface;
• The service life of the painted surface will greatly depend on the quality of the mixture and on the application technology.

The "fur coat" method of applying plaster for insulation on a facade entails several important steps to guarantee both functional durability and visual appeal. To enhance the adhesion and longevity of the plaster layer, a comprehensive surface preparation procedure, comprising cleaning and priming, is initiated initially.

The application itself then calls for accuracy and knowledge. Plaster is applied to the surface in multiple layers, spreading it evenly with specialized tools like trowels and textured rollers. In order to achieve a consistent look throughout the facade, each layer is meticulously smoothed and textured in accordance with design specifications.

Selecting the appropriate kind of plaster is crucial. Plasters with silicone or acrylic bases, for example, provide exceptional flexibility and resistance to weathering, which is essential for preserving the facade’s integrity over time in the face of extreme environmental conditions.

Finally, maintaining the facade’s aesthetic appeal and functionality after application requires careful attention to detail. Frequent inspections and infrequent touch-ups can keep small problems from getting worse, extending the plaster’s life and improving the building’s aesthetic appeal overall.

Video on the topic

Plaster (fur coat) for beginners! (100% method)

Plaster fur coat

25.05.2025 Twist the barrelcank

Mixture cave/How to apply a decorative plaster fur coat./ Applying a structural roller/

Decorative plaster fur coat ilmax. Application instructions