Installation of plastic slopes on the windows with your own hands: video

Are you trying to improve the way the windows in your house look and work? Installing plastic slopes, sometimes referred to as window sills or casings, can be a fun do-it-yourself project that enhances aesthetics and functionality. If you’re a novice do-it-yourselfer or a seasoned pro, we’ll walk you through the process step-by-step in this article to make it easy for you to follow along.

Plastic slopes act as weatherproof coverings for window frames, improving insulation and keeping out moisture. They also give your facade a polished, uncluttered appearance, which enhances its visual appeal. Installing them yourself will save you money on installation fees and give you the satisfaction of finishing a project that enhances the exterior of your house.

It’s important to gather the required tools and materials before you start. A level to make sure the slopes are installed straight, a marking pencil, a saw to cut the slopes to size, a caulking gun with adhesive caulk to seal the slopes in place, and a measuring tape are usually required. To match the style of your home, you can select from a range of plastic slope designs and colors based on your window configuration and personal preferences.

The customizability of plastic slopes is one of its benefits when installed by oneself. The slopes can be customized to fit tightly around your windows, guaranteeing an exact fit that balances the proportions of each frame. This modification assures effective functionality and improves the aesthetic coherence of your facade by rerouting rainwater away from the window surface through the use of slopes.

We’ll provide you step-by-step directions and practical advice throughout this tutorial to ensure that your do-it-yourself project is successful. Every stage, from setting up the workspace to firmly fastening the slopes, is intended to provide you the skills and assurance you need to produce results that look professional. Let’s get started on adding plastic slopes to your windows so you can change the facade of your house with this useful and attractive upgrade.

Homeowners can improve the appearance and functionality of their windows by following the step-by-step instructions and helpful video demonstrations in our guide, "Installation of plastic slopes on windows with your own hands: video." This article attempts to simplify and make the installation process accessible, from choosing the appropriate materials to taking exact measurements and finishing touches, so that a professional finish can be achieved without the need for expensive professional assistance.

Reasons for installation

Only when slopes are installed skillfully and in accordance with the guidelines can plastic windows be deemed correctly installed. They bear some of the weight of the thermal insulation, keeping the mounting seams from fogging. Temperature variations or poor decorating can damage building materials’ structural integrity. As a result, installing slopes that are compatible with technology is crucial.

Finishing plaster

Given that it has more drawbacks than benefits, this option is now regarded as being rather antiquated. However, you can still give this option some thought.

There are two primary benefits to this kind of finish that stand out:

• Low cost of installation.
• If the windows were installed close to the walls, then this is the only possible option.

Unfortunately, this approach has a lot more drawbacks, so you should consider the unfavorable effects of using it.

Among the drawbacks, the following stand out:

• Plaster is not the final option for finishing, it will still need to putty and paint the slopes.
• After work, there is a lot of waste.
• It is impossible to install additional insulation from mineral wool or drywall.
• You need experience in installation.
• Non -aesthetic appearance, to solve this problem you will need expensive paint.
• Small service life. After some time, plaster will begin to crumble.

If you’ve determined that you absolutely must have plaster after carefully considering all the advantages and disadvantages, then go ahead and make your purchase.

Using drywall

This content has been incredibly well-liked lately. It is used to build many structures, including wall slopes. There may be some challenges during installation, but they are significantly fewer than during plaster decoration.

The following are the indisputable benefits of using this material:

• Relatively small cost of the material.
• Small waste after installation.
• Installation can be done with your own hands.
• The damaged part of the drywall can be painted or filled with putty.
• Long service life.

But, drywall has disadvantages just like any other material, including:

• During installation, a large number of tools and materials are used.
• It is very sensitive to high humidity, so it is better not to use it in an aggressive environment.
• Warming is necessary.

You can now proceed straight to the slope installation. The equipment and supplies required for installation:

• Construction or stationery knife.
• Hacksaw.
• Scissors.
• Drill or perforator.
• Roulette, hammer, pencil.
• Scurgery.
• Valiki and brushes.
• Sandpaper.

You can get to work now that the required tools are in close proximity. Initially, we affix wooden bars all the way around the window, flush with the wall. Dowels are used to secure the bars. Then a sheet of foam and some drywall are cut with a stationery knife. Using the completed slope segment, the insulation is pressed into place between the bars. Around the perimeter, the drywall is screwed into wooden bars at a distance of roughly 20 cm.

We start with putty after recording every slope. A thin layer of the putty mixture is applied to the sheet to seal the imperfections and self-tapping screw caps.

Painting comes next. The windows do not need to be stained; you can paint as usual. You can begin decorating the corners once the paint has dried. In order to accomplish this, plastic corners are cut to the required length and affixed to the surface.

Plastic materials

Comparing plastic slopes to plaster, there are many benefits:

• Long life.
• Aesthetic appearance.
• Closes all joint defects.
• Does not need additional decoration and painting.
• Excellent thermal insulation.
• Average cost of installation work.
• Installation can be done in 2-3 hours.
• Easy in operation – the surface is easily cleaned.
• High moisture resistance.
• Large selection of color palette.

It’s crucial to fill in any gaps left by replacing old windows since doing so can seriously harm the window opening. Sometimes the cracks are visible through the window, but they are not always visible. This implies that seams were depressurized following installation.

Thermal insulation methods

Slopes that are installed in compliance with all regulations must be heated effectively. The simplest way to achieve thermal insulation is to place a heater beneath a plastic layer.

Insulation can be applied in two methods:

1. Insulate the space with foam or mineral water on the inside of the window.
2. Pour the slot with foam at the junction of a window opening and a PVC frame.

It is recommended to use leaf foam, polystyrene foam, or an isover to warm the 50 mm gap on a smooth surface. Mineral wool is preferable if the walls are used erratically. Mounting foam can be used to fill in the spaces outside.

Since well-insulated multi-layer walls effectively shield window openings from the elements, it is sufficient to cover all exterior gaps with mounting foam rather than insulating the slopes.

Installation of slopes made of plastic

Now think about how to create plastic slopes on the windows. Essential instruments:

• Sheet plastic 8 mm, enough 6 meters.
• Strippine strip p-shaped and F-shaped.
• Perforator or drill.
• Building level.
• Scissors for metal.
• The square.
• Pencil.
• Hermatic and self -tapping screws.

Similar to drywall, plastic slopes need to be mounted from bars and foam using your hands. After that, we glue the beginning profile to the window frame. For added reliability, you can also glue the profile to the bar for construction brackets.

The next step is fastened to the F-profile bar that runs along the wall.

The hardest part is about to begin: installing the panels. This will assist in converting the previously fixed plastic profiles into an F-profile because they are prone to bending. Prior to that, though, you must push the slope’s edge until it stops by inserting it into the beginning element.

Next, to insert the panel, gently squeeze the inner edges of the f-profile. Should the task be executed accurately, the profile ought to revert to its starting point and firmly secure the panel.

A satisfying do-it-yourself project that improves your home’s appearance and usability is installing plastic slopes on your windows. You don’t need specialized skills to achieve professional-looking results if you follow the steps in our video guide.

To start, planning is essential. Before you begin, make sure you have all the required equipment and supplies on hand. This includes the actual plastic slopes, a level to make sure everything is straight and aligned, a measuring tape, a saw for cutting, adhesive or screws for fixing, and a saw for cutting.

After that, take exact measurements and cut the plastic slopes to fit your windows. To prevent mistakes, make sure you measure accurately several times. Not only does a precise fit guarantee appropriate weatherproofing and insulation, but it also looks better.

Throughout the installation procedure, focus on the details. Secure the slopes in place with screws or adhesive. Check for straightness with a level and make any necessary adjustments. For the slopes to last a long time and be effective, proper installation is essential.

Finally, once the installation is finished, celebrate your success. Plastic slopes offer practical advantages like easier maintenance and better insulation in addition to giving your windows a sleeker appearance. Savor the improved functionality and appearance they provide for your house!

Video on the topic

Roads and window sill do -it -yourself installation

Installation of slopes. How to install slopes from sandwich panels.

Window slopes will stop freezing and blackening if you do it