Installation of metal -luster for logs: step -by -step instructions

A great way to combine the natural beauty of wood with the toughness and low maintenance of metal is to install metal cladding on log homes. This cutting-edge solution gives your home long-lasting protection from the weather while also improving its aesthetic appeal. Metal cladding is a smart and useful option whether you’re remodeling an old log home or giving a new one a sleek finish.

It is imperative that all required tools and materials are gathered before beginning the installation process. Measurement tools, screws, a drill, metal cladding panels, and safety gear are required. A more seamless installation and a more polished outcome are guaranteed with proper preparation. Additionally, it’s critical to comprehend your log home’s structure to make sure

When chosen metal -bending under the log

Many dream of a cozy house from a real wooden log house. However, most still choose the construction materials of the latest generation. They are more functional, practical, with them the construction process is faster. Lining under a log will turn a house from any building materials – from foam blocks, brick to beautiful and cozy log. House made of metal -losying is much easier to care for. Behind natural wood, constant regular care is necessary – it must be impregnated with antiseptics, treated with hydrophobisators, painted from time to time. This is not required siding, except to wash it from dust and dirt a couple of times a year. In addition, metal -bending is repaired. If one panel is damaged, it can be pulled out and replaced.

The application of log-made logs is broad. It is used to decorate a wide range of structures, including stores, homes, cafes, camp sites, and recreation centers. Historical buildings that have already been constructed can also be rebuilt using metal lining for logs.

Features of the material

High-quality leaf metal with galvanizing (produced by contemporary rental) serves as the foundational raw material for the production of metal luster. A polymer coating is applied to the top of the metal, allowing for the application of wood textures in a range of hues, from light to dark (oak, for example). Siding’s unique quality is its perfect replication of the wall’s surface beneath the log wall. Siding with a skeleton, akin to natural wood, and a smooth or textured surface are now options (depending on your budget).

The following image will appear if you think of this incredible material in layers:

• The outer coating is polyester or polyurethane;
• primer;
• zinc coating;
• Cold steel sheet with 0 thickness.45 to 0.5 mm;
• again a gaspid layer;
• chromium-plated;
• Polyester from the inside.

The thickness of the coating determines its strength and longevity; the thicker the coating, the more dependable it is. Compared to 25 μm, the coating with a thickness of 35 μm has many design advantages and is more durable. There are layers in the multilayer coating:

• basic;
• decorative with a pattern;
• protective transparent.

A coating like this is intended to last for several decades. Numerous tests were conducted to verify its resistance to mechanical and atmospheric effects. The excellent architectural design that buyers receive when decorating the metal bending facade beneath the log doesn’t require extra care.

Be aware that certain manufacturers have decided to release siding that already has an insulation layer attached. These products are definitely more costly, but they have advantages of their own because sheathing doesn’t need to be used to insulate the house’s walls. This expedites the work process and reduces labor expenses.

Certain siding choices for the facade’s decoration take into consideration the desire for vinyl siding to be placed in front of metal. The primary factor is cost: vinyl is far less expensive than metal. Regarding the remaining attributes, they are shown in the table for comparison:

Table No. 1 compares the features of vinyl siding with metal-chained siding.

Characteristic	Vinyl siding	Metalsayding
Installation restrictions	Installation is possible only at a temperature of -5 degrees to +25	Installation is possible in any season
The temperature of the escapation	-50 ° C to +50 ° C	-50 ° C to +80 ° C
Fire safety	not a fuel, but starts to melt quickly	not a fuel, but with prolonged exposure to particularly high temperatures, it may begin to deform
Sensitivity to humidity	absent, but mold may appear	absent, with proper installation, rust is excluded
Sensitivity to temperature fluctuations	High: Panel plays	average: compensated by installation
Sensitivity to mechanical damage	High	Low

We offer straightforward instructions in our guide on "Installation of Metal Flashing for Logs" to guarantee that the facade of your house is both aesthetically pleasing and shielded from potential water damage. Our comprehensive instructions are made to be easily understood by homeowners who want to install metal flashing to improve the longevity and aesthetics of their home. They cover everything from surface preparation to firmly fastening the flashing.

The advantages of the material

The following is a list of this material’s benefits and features:

1. It has a slight weight and is easy to install, so that, when installing it, special equipment and lifting equipment are not required.
2. Differs in good resistance to sharp and strong temperature extremes. Operated without deformation in a wide temperature range from -80 to +180 degrees.
3. It is resistant to corrosion processes that arise as a result of the effects of rain, hail, snow, UV radiation, aggressive substances in the air as a result of poor ecology, exhaust gases, etc. The durability of the material is achieved thanks to multi-stage processing by zincing and polymer-thorough.
4. Has no noticeable thermal expansion.
5. Fires. The sheathing prevents the spread of flame and protects the frame of the house from fire.
6. Plays the role of the screen that prevents the penetration of electromagnetic radiation inside the house.
7. Resistant to mechanical influences and physical factors.
8. Between the frame and the metal -bending, you can lay an additional insulation layer to increase thermal insulation characteristics.
9. The facade trimmed with metal -bending does not cover the walls completely, contributing to the air exchange.
10. Attractive in terms of decorativeness.
11. The facade made of metal -losying is perfectly combined with any roofs – with flexible tiles, with a metal tile and even with a fold.
12. Environmental (does not harm the environment during operation and is available for secondary processing after becoming unusable).
13. Durable. Metalsayding without losing technical characteristics can serve up to half a century. At the same time, the sheathing does not need to re -color and other types of processing.

What additional characteristics of metal chairs are there? It requires less upkeep and lasts for decades longer than lining made of natural wood. Even after extended use in the direct path of atmospheric precipitation and directed UV radiation, the coating maintains its color brilliance. Regarding the skeptics’ concerns that the metal panel might rust, after the metal-lusing is installed, all of the edges are covered with strips, preventing moisture from getting in.

Dimensions and price

In the market of modern building materials, metal -beading is presented in a very wide range of colors, so that you can implement any design solutions with its help. Geometrically the size and thickness of the metal from which siding is made may vary. Woodstock production of metalprofil is more convex, that is, a large bending radius than the same from Grandine. Blockhaus made by different factories does not join due to dimensional inconsistencies and constructive differences in locks. In contrast, for example, from the ship boards, the components of different manufacturers also usually do not correspond to other people"s panels. Therefore, if necessary, buying the material, it is necessary to look for products of the manufacturer, originally purchased.

Even the panels’ appearance varies between factories. Blockhouse, for instance, can mimic a single or double log, and the panel’s measurements can be altered. A log’s structural blockhouse is a metal sheet bent to a specific radius. Oval holes are broken in the upper bar of such a panel so that self-tapping screws can be attached later. A castle that is part of the engagement with the standing bar of the already fixed panel is located on the lower bar. The panels range in length from half a meter to six meters. The ideal size for transportation is thought to be between three and four meters.

Note: Make sure the seller provides you with a full and practical width before purchasing a metal luster. Complete is calculated by accounting for the prefabricated strip, which is helpful in determining the distance in its gathered form.

The warranty periods and the price of siding depend on several factors: the thickness of the metal sheet (0.45 mm or 0.5 mm), the presence of galvanizing, type of coating. The drawing is usually applied using photo-offset printing technology. It is important to note that this type of metal -bending refers to the premium finishing building materials, so it’s difficult to call it cheap. The price per square meter will be invariably greater than, for example, a shipboard due to the need to use more technologically complex equipment. Therefore, imitation for the log is mainly used in the decoration of private cottages and country houses. Building organizations prefer a more affordable shipboard in cost.

Prices for metal siding

Metal siding

Installation of metal -championing for logs

Usually at the very end of construction, or even after the house has been occupied, the metal seating beneath the log is attached. In any case, the house had already shrunk after windows and doors were added and a roof was installed. But manufacturers aren’t standing still; nowadays, you can already purchase metal bending with sophisticated locks that let panels move in relation to one another. This is useful for lining homes that haven’t yet experienced shrinkage.

If someone is interested in purchasing siding, they should first get in touch with the seller or the manufacturer, if they offer these services, and provide information about the dimensions and design of the facade that will eventually be covered in siding. Using a specialized computer program, the company’s engineers will determine the panel lengths as well as the numbers, arrangements, and names of the component parts. The panels are then cut to fit the facade’s dimensions in two to three days.

The number of siding can, however, be determined independently if preferred. You should subtract the area of the windows and doors when calculating the area of the walls. thus establishes the skin-needing area. The area of the panel that will be purchased is now calculated by multiplying its length by width. We determine the number of plates required for cladding by dividing the total summarized area of all walls by the area of the panel. A further 3-7% must be added to the final result because waste that is difficult to apply will arise.

The following components are needed for installation:

• starting strips from which installation begins;
• the finish plankide of the junction between the panels and the cornice;
• connecting strips covering the joints between the panels;
• external and internal angles;
• near -center friez planks;
• tints to protect the basements from draining water;
• DOBORTS.

By using dates, you can conceal the spaces that always show up when decorating facades with intricate patterns and give the skin a harmonious, finished appearance. In addition to providing aesthetic appeal to the joints between panels, corners, and areas next to walls and roofs, contained elements shield building structures from dust, moisture, and debris at the locations where panels connect, prolonging the life of the home’s walls.

The alloy used to make dobed is the same as that used to make panels. Their resistance to corrosion from mechanical and atmospheric factors is comparable. When placing an order, you can use a specific online calculator to determine the number of dobages or specialists.

To prevent damage during transportation, a special film is applied to the front side of the purchased metal bend. Within 48 hours, the panels should lie down before beginning installation. After that, the film needs to be taken out before installation activities begin. It is advised to remove the film as soon as the transportation is finished if siding is kept in an open space. It is a fact that when exposed to UV radiation, she can bake to the panel.

Preparatory work and installation of the crate

The wall must first be cleared of any previous paint or coatings. Additionally, everything that could obstruct installation must be removed from the area around the house, including any decorative and lighting elements and tree branches that need to be sawed off. It is necessary to disassemble drains and roller shutters.

Note: The construction level is used to determine the verticality of the walls. If the difference is less than 2 cm per 10 linear meters and insulation is not required for the house, the crate cannot be completed. Tiny adjustments only cause the metal to bend in unison.

The crate is fastened with metalsayding underneath the log. The wooden bars measuring 40 by 40 mm or the metal profile with a step of 40–60 cm are used to mount the crate. The crate is constructed on straight suspensions or strengthened with brackets and corners at an object height of up to 10 meters. The method used to install the crate is marking. The location of the profiles is first measured, and the marker is then used to mark the spot.

Next, the profiles of angular contours are positioned. The level is set with a step of 40–60 cm in relation to a bearing profile. The attachment of the crate is vertical. The distance between the wall and the crate should be 15 mm. Along the edges of windows and doorways, bars are placed. This will serve as the insulation’s foundation. Materials for thermal insulation can be installed cross-country, vertically, or horizontally. Dowels are used for walls made of concrete and brick, and screws are used for wood.

For siding installation, you can buy a specialized subsystem composed of metal that is 0.9 mm thick. It includes Mr. The wall is where the bracket is fastened. This layout will securely hold metal siding. Due to the possibility of the tree becoming under siding or drying out over time, the finished installation system is preferred over homemade wooden ones. The drywall profile, which was designed exclusively for interior use, is not meant to be used for siding installation. The ability to leve an uneven wall is another benefit of a metal crate.

The metal crate’s phased device:

1. Since the walls tend to carry out steam, vapor barrier is pre -attached to the walls. The overlap of sheets should be 100-150 mm.
2. When fastening the metal crate, the brackets are first attached with a step of 40-60 cm. Subsoles of rubber or foamed polyethylene are necessarily laid under the brackets to avoid cold bridges.
3. Next, the insulation is installed (first you need to calculate the heat loss of the building). The insulation is attached with special dowels of the fungus – up to 5 fungi is consumed per sheet (in the corners and in the center), you can additionally fix it with a rail in the center so that it does not slip. When choosing a heater, you should look at the moisture absorption coefficient, which should be less as possible.
4. A cold -bent corner up to one and a half millimeters thick is attached to the brackets.
5. A wind -drift film is pulled on the corner.
6. A hat profile is attached to the corner, which has sufficient rigidity to hold the entire system. At the expense of the depth, the haat profile makes it possible to breathe metal. That is, the condensation formed, the air flow will be removed from the system. Instead of a hat profile, you can use a M-shaped corner of galvanized steel.
7. The finished crate is checked by level or plumb line and regulated if necessary.

Prices for various types of bars

Bar

Video – metal siding. Choosing and installation features

Installation of metal -luster for logs: step -by -step instructions

The following tools will be needed to fasten metal-losing:

• screwdriver;
• punch;
• laser level, plumb and wooden square;
• kiyanka;
• brush;
• Roulette with a fabric strip;
• scissors for metal for trimming panels;
• Passatigi.

It is possible to sheathe a log’s home using metal siding in both vertical and horizontal directions. The visual effect calculation is the only factor used to make this choice. If the home’s owner wishes for the structure to appear taller, the metal bending is installed horizontally, below, and vertically.

The simplicity of the installation of siding is that it does not require any special building skills to carry out its implementation. First, the initial bar is taken and screwed in level to the subsystem or on the crate with self-tapping screws with a galvanized press-shame or with a rubber seal that will prevent moisture from entering the system. Then the corners are exhibited. Then the siding bar is taken and put on the lower edge on the initial bar and screwed through the perforated hole to the crate. For the lower panel, the next bar is hooked in the same way. Installation is necessarily made in the direction from the bottom up. Thus, a set of walls to the very top is made. Each punk is checked by level. The last panel is fixed with the finish line.

Prices for popular models of screwdrivers

Screwdrivers

Video – House sheathing with a metal siding under a log

The following are detailed instructions for installing metal champions:

Step 1: Insert the panel and click. You can use an interference to fix the element if needed.

Step 2: The center of the perforation is twisted with self-tapping screws. It’s important to leave 1 to 1.5 mm between the panel and the self-tapping screw to allow for siding movement when heated or cooled.

Step 3: It is crucial to check the levelness of each row of facing paintings after installation because if there is even a slight deviation from the horizontal, it will gradually increase during the installation of the next panel.

Step 4: Fastening is done using the crate step in every collapse. To avoid the panel deforming during heating or cooling, a gap of 5 to 10 mm is also left when installing prefix elements.

In case you don’t intend to utilize any extra components, you can overlap the panel. You must cut the lock off of one panel in order to do this. There should be a 25 mm overlap.

If cutting panels is required, a hacksaw or metal scissors are required. An angle grinder with an abrasive circle and a grinder is not suitable for these purposes because the heat from the panel helps to erode the zinc layer, which will eventually cause the panel to rust more quickly. But if you apply anti-corrosion paint to the cut right away, this can be prevented. For better trimming accuracy, begin cutting from the edges of the perforation.

Wearing tight working gloves is essential when handling metal chairs to prevent hand injuries. Wear safety glasses when working with pouring insulation and cutting panels.

Therefore, installing it is as easy as bending metal with your hands beneath the log. Naturally, it is preferable to enlist the assistance of the assistant who will hold the panels while they are being fastened if the panels are between four and six meters long.

One of the most important steps toward improving the facade of your home’s aesthetic appeal and structural integrity is installing metal luster for logs. You can add a sleek, contemporary finish to your exterior and successfully shield the logs from weather elements by following these detailed instructions.

To start, planning is essential. Make sure the logs are free of debris and old coatings, and that they are clean and dry. This is a crucial step because it helps the metal luster coating adhere and last longer. Before moving forward, take the time to examine the logs for any indications of rot or damage.

Apply a suitable primer made for wood surfaces next. By sealing the wood, the primer helps to keep moisture out and improves the metal luster’s adherence. Before moving on to the next step, let the primer completely dry in accordance with the manufacturer’s instructions.

Using a brush or roller, evenly coat the logs’ surface with the metal luster after the primer has dried. To guarantee comprehensive coverage and a consistent finish, work in manageable sections. Make sure all of the small details and corners are coated sufficiently to provide consistent protection and a nice appearance.

Make sure you give the metal luster enough time to dry completely before adding another coat, if needed. Depending on the desired sheen and protection level, several coats might be needed. To get the best results, make sure to adhere to the manufacturer’s recommended drying times in between coats.

Lastly, look for any flaws or areas that were overlooked on the completed surface. To ensure a perfect finish, touch up as necessary. Frequent upkeep, like cleaning and inspections on a regular basis, will help maintain the metal’s shine and increase the facade’s longevity.

Video on the topic

House finishing with a metal siding under a tree. Installation of metal siding for a beam

House sheathing with siding (blockhouse)