How to sheathe the base of a private house with plastic panels under a stone or under a brick

Contemplating making exterior improvements to your house? Adding plastic panels that simulate stone or brick to the base of your private home is an affordable and eye-catching way to improve its appearance. These panels have practical advantages like durability and easy maintenance in addition to adding a touch of elegance.

You can mimic the classic beauty of natural materials like stone or brick without having to pay a high price by selecting plastic panels for the base of your home. These panels are made to endure a variety of weather situations, guaranteeing your home’s long-lasting beauty and security.

Under a stone or brick finish, installing plastic panels is an easy process that can dramatically change the appearance of your home. These panels come in a variety of designs and hues to suit your aesthetic tastes, whether you favor the rough feel of stone or the timeless appeal of brick.

Plastic panels are lightweight and manageable compared to traditional stone or brick, which makes them perfect for both professional contractors and do-it-yourselfers. They can be put in fast and effectively, causing the least amount of disruption to your daily schedule and immediately improving the curb appeal of your house.

What is a base

The upper portion of the foundation, known as the base, extends 30-70 cm above the earth’s surface. It can be reconstructed out of brick, wood, or stone, or it can be constructed using the same material as the subterranean portion. If the house is on stilts, he can serve as a decorative element or an auxiliary role depending on the type of foundation. The area between the ground and the floor of the house can be converted into a new room called the zero floor with the aid of basement panels if the house is built on a high pile-screw foundation.

Why sheathe the base

Weather variations have a particularly damaging effect on the lower portion of the house, which is in contact with the earth. The water streams in the spring and fall, the winter frosts, and the summer heat cause the cement mortar in the brickwork to wash away, turning the wooden structural elements into dust. There are numerous fissures on the basement walls, where a chilly breeze comes from, and they can reach the toads and snakes. The building’s base needs to be sheathed in a sturdy, moisture-resistant material in order for it to collapse swiftly.

Requirements for the cladding of the basement

The basement of the basement is subject to the following specifications:

• Strength and durability of facing materials;
• Maximum permissible load on the foundation;
• Aesthetic appearance;
• Installation technology.

The method used to install the basement panels is just as important as the material’s quality. No matter how high-quality the material was, if there were serious mistakes made when working with siding, the base would soon start to collapse.

High-quality building supplies should be used for all decoration-related projects. On their surface, chips, scratches, or cracks are unacceptable. The work was completed in compliance with the guidelines and the technology. It is crucial to consider how well the basement’s surface has been prepared for decoration.

Types of basement panels

Stone, plastic, metal, and composite materials (artificial stone) are used to make basement panels. The panels vary in terms of size, pattern, color, lock system device, and installation technique. These panels are also known as siding, but they are stronger and thicker than regular wall panels.

Профлисты используются вместо цокольных панелей. A profiled sheet’s trim offers benefits and drawbacks. Although it is inexpensive and simple to install, other finishing materials look better than it does. It can be used as panels if the building’s appearance isn’t that important.

Under a stone

Under a stone, plastic panels are sheets of material that range in size from 70 to 120 cm (depending on the manufacturer), with a relief pattern designed to mimic the look of stone on the front surface. Yet materials other than PVC can be used to create the panels. A material with a thin appearance and a tile-like appearance can be made from either natural or artificial stone. Its front is convex, and its back is flat.

Under the brick

This is yet another typical basement finishing pattern. It may appear that the decoration beneath a brick base is meaningless, but this is untrue. Panels are lined with panels for practical reasons, such as extending the life of a private residence and shielding it from the elements. Brick siding can be composed of burned clay, plastic, or metal.

Never purchase panels manufactured using foamed material. Even with its increased thickness, it is the weakest and most vulnerable to abrasions and sunlight.

Discover how to easily improve the exterior of your own home by using plastic panels that resemble brick or stone. This article examines workable solutions for covering the house base and provides details on the advantages and installation procedure of these adaptable and reasonably priced materials.

Necessary tools and materials for installation

You will need a variety of building supplies and instruments in addition to siding panels if you want to install basement panels yourself.

• Metal profiles;
• Insulation;
• Vapor barrier film;
• Screws;
• Dowel with a length of at least 100 mm;
• Screwdriver;
• Drill with a winning drill and a drill designed for metal;
• Bulgarian with a disk for cutting plastic, metal and stone;
• Level;
• Scissors.

The visor covering the portion of the basement that protrudes can be constructed from plastic, galvanized steel sheets, or tone-matched specialty tiles.

Avoid constructing a crate using wood beams. Not only can high humidity be dangerous for wooden products, but it can also harbor a fungus that isn’t always visible when the product is bought.

Bullshit finishing technology with panels

Although the technology for lining with facade panels is straightforward, it will take a great deal of time and work. The primary task is to get the basement’s exterior ready for decoration. Only in dry, warm weather during the warm season can you work. Dust, dirt, and moss (if any) must first be removed from the base. A step-by-step guide for the installation process is provided below.

1. Measures, calculate the volume of materials necessary for work.
2. A frame for panels is created. The frame is made of metal profiles. First to the wall, parallel to the ground (blind area), the upper and lower metal profiles are attached. Do this with the help of dowels, having previously drilled holes under them in the basement. Then the vertical beams are attached, at a distance of 70-120 cm from each other. The crate should be obtained.
3. A heater is laid in the space between the beams of the frame. It can be a isvel or a foam.
4. Pull the steamed film on the frame.
5. Fasten the panels to the frame using screws.
6. The panels are connected to each other by a special system of locks "Ship-Paz". For reliability, each sheet is attached to the frame with screws.
7. Strips are installed at the corners.
8. On top it is necessary to mount the visor around the perimeter of the house above the upper edge of the panels.

A straightforward drain system should be put in place along the house’s perimeter if there was never a blind area there or if there aren’t any resources available to build one. With your own hands, you can construct it from the diameter-cut pipes that are stacked to the bottom of the basement.

Certain homes have windows on the walls of their basements that overlook the ground floor. They too need to be finished. For this, use specialty plastic window tints.

Lorcation of the pile foundation with base panels

No basement exists in a house on piles. Beneath the building, they construct an artificial base so that it doesn’t look ugly. Either sandwich panels or brickwork are used in its construction. The plastic panel lining used in the pile-screw foundation is essentially the same technology as that used in a typical basement. The frame is placed in the space between the piles or fastened to them from the outside (under the house).

The main manufacturing companies

The list of companies that make siding panels to adorn private homes’ facades is provided below.

• Grand Line. Siding for the finishing of the basement manufactured by Grand Line is one of the most common building materials for lining the protruding part of the foundation. The wealth of colors and textures, as well as an affordable price, made it one of the market leader.
• Caucasus Canadaridge. The effectiveness of the technologies used in the production of basement siding Canadarid was successfully tested in the conditions of the Canadian and Russian climate. The panels are cast under high pressure and stained during the casting process. Thus, the uniformity of the structure and color of the products is ensured. There are about seven colors. The surface of the panels is resistant to burnout in the sun. The company provides a 30 -year quality guarantee for its products.
• Tseral Siding Fineber. Facade panels Fainbir have a large assortment of panels, various colors and textures. It includes 6 types of stone panels and 2 types of siding for brick. A relief pattern, its color and texture exactly reproduce a brick pattern and some breeds of natural stone (granite, marble). Fineber panels are resistant to mechanical influences, atmospheric sediment, do not burn out in the sun.
• Facade panels Tecos (IMABEL). Facing panels for finishing the basement manufactured by Tacos also have high quality execution. The strength of the products makes it possible to use not only as an element of the decor, but also protect the most vulnerable places of the facade of the house.
• Facade panels Zodiac. Zodiac is a facing material of domestic production, having a multi -layer structure. Zodiac products are environmentally friendly and complies with world quality standards. In the building materials market, this company appeared recently, but has already managed to highly wake up from builders and designers.

The most well-known basement panel brands are these ones. But don’t overlook regional producers of different building supplies. Although they are not as well-known, their goods must still be of a high caliber. Remember that the quality of the panels influences not only the base’s basement but also the quality of the other building materials used in the installation. The quality of the fasteners and crate determines their strength. The case may come off if they are of poor quality.

How to choose the right

The dilemma of choice arises from the wide selection of siding available for the basement finish. How do I pick what’s best in terms of both cost and quality? The answer to this question is contingent upon the local climate, the building’s appearance, and the buyer’s financial situation. Not all of the advice will be unnecessary.

• The more severe the climate in the region, the thicker and stronger there should be siding.
• There should be no scratches and chips on the surface, especially if the panels are made of metal.
• Cheap siding – low -quality material. Cheapness means that low -grade raw materials were used in production, which means that the panels will not be strong enough and will not last long. Such building material should not be purchased.
• When buying expensive types of basement siding, the buyer needs to demand a quality certificate from the seller, since there is a great risk of buying a fake.
• You need to adhere to the installation instructions. Independent installation, although it is simple, but if the work is carried out carelessly, then the life of the basement will be less.

If there is a lack of self-confidence, it is best to leave all work to the experts. The region, the building material brand (imported American and European brands are more expensive), and the worker qualifications all affect how much work needs to be done to finish the base.

Prioritize both aesthetic appeal and practicality when deciding how to cover the base of your private home with plastic panels that resemble stone or brick. Plastic panels are an affordable option that can dramatically improve your home’s external appearance.

The adaptability of plastic panels made to resemble brick or stone is one of its main benefits. They are available in a variety of colors and textures, so you can design the facade of your house the way you want it without having to deal with the cost and difficulty of actual masonry.

The simplicity of installation is another crucial consideration. In contrast to conventional stone or brick, which can be labor-intensive and require specific knowledge to install, plastic panels are lightweight and made for easy installation. Many homeowners will find it to be a sensible option because of the shortened installation time and lower costs.

Plastic panels also provide low maintenance and durability. Because they are insect, mold, and moisture resistant, they can be left looking nice for a long time with little maintenance. They are a long-term investment in the protection and beauty of the exterior of your house because of their durability.

In conclusion, you can combine affordability, visual appeal, ease of installation, and durability by choosing to cover the base of your private home with plastic panels that mimic stone or brick. It’s a contemporary solution that enables you to design the facade of your house the way you want it without sacrificing quality or going over budget.

Video on the topic

Facade panels – Installation instructions. Installation of facade panels with your own hands.

Distribution of the basement of a wooden house with panels.

How to finish the foundation with facade panels under stone and warm it with a foam. 100 houses Tyumen.

How to sheathe the foundation with facade panels and warm with a foam? Company 100 houses Tyumen