Because of its strength and visual appeal, full-bodied facing brick is a widely used, long-lasting, and adaptable material in construction. Full-bodied bricks are heavier and more durable than standard bricks because they are solid all the way through. Standard bricks are hollow. They are made of shale or clay and are frequently fired at high temperatures to improve their consistency of color and durability.
Full-bodied facing bricks’ endurance in inclement weather and long-term color retention are two of their main benefits. They are therefore perfect for external facades where long-term appearance and durability are essential. These bricks’ sturdy construction also makes them more insulating against temperature changes and noise, which improves building energy efficiency.
Full-bodied facing bricks are preferred by builders and architects due to their versatile aesthetic appeal. They allow for creative expression in architectural design because they are available in a variety of colors, textures, and finishes. These bricks can be used in both traditional and modern settings, and they go well with both classic and contemporary home designs.
Furthermore, full-bodied facing bricks are more appealing to developers and homeowners because they require less upkeep after installation. Their sturdy nature lessens the possibility of weathering or impact damage, extending the life of the building facade.
When it comes to exterior building materials, full-bodied facing brick is a strong option that is well-known for its longevity and aesthetic appeal. These bricks, in contrast to ordinary bricks, are completely solid and provide remarkable strength and resistance to weathering. They are valued for their resilience to severe weather conditions and for holding onto their color and texture over time. In addition to being useful, full-bodied facing bricks give any facade—whether traditional or modern—a unique look. Their adaptability enables both homeowners and architects to design gorgeous, durable exteriors that skillfully combine aesthetics and functionality.
- Types of complete facing brick
- Kiripichi prices
- Features of facades cladding with full -bodied bricks
- Step -by -step instructions for the production of work
- Prices for building levels
- Video – how to make perfect seams
- Cement prices and basics of mixtures
- Basic errors during cladding
- Video on the topic
- How to fix the facing brick to the wall, how to reinforce an Olicee brick, than to fix the brick to the wall
- Brick review lining red single velvet full-bodied M-300 GKZ
- Ceramic brick is full -bodied
- Review brick lining red, single smooth, full-bodied M-300 GKZ
Types of complete facing brick
The dimensions and weight of facing bricks vary depending on the technology used and the material used in the manufacturing process.
| Name | Dimensions | Weight | Price |
|---|---|---|---|
| Ceramic | 250 × 120 × 65 mm | Up to 3.7 kg | From 12 rubles./PC. |
| Clinker standard | 250 × 120 × 65 mm | Up to 4.2 kg | From 15 rubles./PC. |
| Clinker elongated | 528 × 108 × 37 mm | Up to 3.8 kg | From 16 rubles./PC. |
| Hyperpressed | 250 × 120 × 88 mm | Up to 2.0 kg | From 11 rubles./PC. |
| Silicate | 250 × 120 × 65 mm | Up to 4.1 kg | From 10 rubles./PC. |
The company has perfected the process of producing bricks that retain the original texture of face surfaces, all thanks to modern technologies. For example, full-bodied bricks can be used to decorate the facades of the following options:
-
Glazed. A special vitreous coating, before the firing after forming on the visible surfaces, a liquid glaze is applied, under the influence of high temperatures, it turns into a vitreous mass. The surface has high indicators of resistance to scratches and washing, does not completely absorb moisture. In addition, dust does not accumulate on it, the development of microflora is inhibited. The glazed brick is easy to wash, the cladding does not lose the initial indicators for the entire period of operation. Disadvantage – the glaze is afraid of sharp dynamic blows with solid objects, has no plasticity, cannot extinguish deformation.
Brick with a glazed exterior
Jumbled brick
Anggobbled brick in various tones
Firbone thickened by brick-ceramic face
Brick with texture
Full-bodied facing bricks in the form can be straight or curved. They can assist you in transforming plain building facade walls into opulent structures during cladding. Window openings, corners, and cornices are completed.
A chamotum bar with a black glaze.
The texture draws attention to the color game.
Kiripichi prices
Brick
Features of facades cladding with full -bodied bricks
The front of the house is brick-clad.
A facade cladding example
The lining of houses with full -bodied bricks has its own nuances, they must be taken into account without fail. The main feature is that a large specific gravity puts forward the hanged requirements for the bearing capacity to the foundations. Keep in mind that at least 50 bricks are required per square meter, taking into account the thickness of the solution. If you take the weight of one brick on average 4 kg, then the mass of a square meter without a solution of 200 kg. The House of average parameters has dimensions of approximately 6 m × 8 m × 4 m, the total area of the facade walls (6+6+8+8) × 4 = 112 m2. We did not subtract the area of windows and doors, this decrease in the area is overlapped by the weight of cement-sand mortar for masonry.
How many bricks are there in a single cube?
Thus, the total weight of the house of the house will be 112 m2 × 200 kg/m2 = 22400 kg. This means that the load on the foundations only due to complete facing brick increases by 22.4 tons. The best option is to take into account the overall load during planning and construction of the foundation. To finish the old buildings with such bricks is unsafe. The foundations need to be strengthened, and this is very long, time -consuming and difficult. In addition, no one can give one hundred percent guarantee that the design will not begin to crack. Any amplification is very difficult to calculate, too many factors affect the final indicators. Some of them do not depend on special construction events. Architects in such cases for insurance use an increased margin of strength, and this further increases the cost of facing work.
Step -by -step instructions for the production of work
Using bricks with faces
How can full-bodied brick be used to clad facades?
Installing facing brick
Step 1: Examine the foundation’s condition. This operation is extremely conscientious. What should I focus on?
- The dimensions of the free foundation tape for cladding. A full-bodied brick should lie on it with the whole plane, if for some reason this cannot be achieved, then the overhang cannot exceed ¼ width. You need to check the dimensions using a plumb line. Lower it from the highest wall point, the distance between the facade wall and facing is selected depending on the presence of insulation. If it is not, then try to clad out the main wall, so it will be more reliable. Unfortunately, not all masons are qualitatively put by the wall, sometimes it floods, the width of the foundation line on the basement means nothing. Be sure to check with a plumb line.
- Carefully inspect the foundation, if the slightest crack is detected, contact a competent specialist for professional advice. There are two ways to solve the problem: use lighter materials for cladding or strengthen the tape. Above in the article we have already said how difficult and expensive work to strengthen the foundation tape, it is better to choose a different option for decorating the facade walls of the house.
- Check concrete strength. Tap it with a hammer. If the concrete is relatively easily pricks – do not use full -bodied bricks for wall cladding.
Make your final choice regarding the facing technique only after conducting a thorough inspection.
Step 2: Determine how big the walls are and how much brick there will be. The superior quality of facing brick reduces wasteful losses, so you shouldn’t do a big supply.
Sensible guidance. Regarding fraud cases, we advise against purchasing a brick via the internet. It is far safer to visit a selling company’s warehouse in person to familiarize yourself with the costs, selection, and caliber of products. After that, place your order.
Tools for bricklaying
Prices for building levels
Construction levels
Step 3: Assess the foundation tape’s linearity using a level.
Using a level, we examine the horizontal foundation.
In the extreme corners, the horizontal spread won’t be more than two centimeters if the builders met the standards’ requirements. The first layer of the solution eliminates such deviations without issues. You will need to precisely align the tape if the non-compliance of linearity does not fit into these values. In order to accomplish this, durable concrete or cement mortar must be used; two to three parts of cement are needed per unit volume. To set up the material, the renovated tape needs to be left in place for at least two weeks.
Step 4: Apply waterproofing to the foundation. High-end, contemporary materials are available for this. However, two layers of regular roofing material are the best choice.
Basement waterproofing
Using roofing material to waterproof the foundation
Join the roofing material stripes with a minimum 150 mm overlap.
Step 5: Install a row of facing bricks all the way around the tape.
Cement computation for bricklaying
During the calculation, adhere to the recommended distance. One centimeter is considered universal, but you can change it a little depending on the style of the facade walls. If in the opposite corner the brick needs to be cut, then first try to slightly increase the gap on the front row. Each time, change the gap by about 2-3 mm, in this way it will be possible to quietly eliminate up to 15 cm of inconsistency. Specific values depend on the length of the wall. Further there are two options: use a new device to control the thickness of the seam or put a few bricks “by eye” an increased thickness of the solution, and then go to standard parameters. Professionals go in a different way, they have great practical work experience, the hand is full, and their eyes notice the slightest deviations in the position of bricks. But it is difficult for beginners to do this. We advise you to make an elementary device of the desired parameters from two wooden racks.
To ensure that the lined surface looks flawless, we advise creating a basic template.
How is it carried out?
- Prepare two flat rails about 80 cm long. One width about 10 cm and thick ≈ 2 cm. This bar will be a pen.
- Depending on the thickness of the pantry, prepare the control rail. The length is also 80 centimeters, the width should be 1.5 cm more than the thickness of the handle. This bar controls the thickness and depth of the cladding masonry solution.
- With self -tapping screws or cloves, fasten both planks with the letter “T”, make sure that the thin bar is located exactly in the middle of the handle.
Naturally, a device prepared for vertical seams should have a shorter length based on the same algorithm. A little bit wider than the brick’s width, at about 15 cm. It takes only a few minutes to make such a device, and using it is incredibly practical. The front face of the facing bricks is clean, and the seam is exactly the same. A lengthy tool is placed on top of the bricks, the solution is applied, and a trowel is used to align it along the upper bar’s thickness.
Video – how to make perfect seams
Sensible guidance. Take the rail and stretch it along the masonry a little bit before taking it off to ensure an even seam. As a result, the seam will be even and smaller, which will make finishing cutting much easier.
Step 6: Begin by working on the cladding’s corners; it is advised to lift them into 4-5 rows. How should corners be placed?
- For a height of 5-6 rows, the first row should have six bricks in each string. If you were mistaken, not a problem, the angle can be raised at any time, and bricks in each row are additionally put. For work you will need a construction level, it is advisable to additionally use the plumb line. This is the most accurate and universal instrument of a professional mashedman.
- Put the first seam with a thickness of about 2 cm. Increased thickness will increase the accuracy of alignment of the first row, and this is a very important point. Check the position of the bricks in at least two planes, make sure that the corners of the bricks are strictly on the same line, constantly check the parameters.
- Put the second layer of mass using the device. The thickness should be several millimeters more, this will make it possible to correct the position of facing bricks.
Step 7: Cut two corners, push the rope, and place cloves in the first seams. Make sure she doesn’t droop. Verify the separation between the foundation tape and the rope. Everything is as it should be; begin building walls. Use measuring tools frequently and don’t rely solely on your eyes. Even skilled masons check the placement of every cladding brick; only walls that are compatible with the peephole should be done. After a few rows, do a check, and if any deviations are found, make the necessary corrections.
Bricks facing one another
We arrange the answer on metal rods.
Brick cladding varieties
Brickmasonry using reinforcement
Brick installation in a row
Brick arrangement at level
Step 8: Don’t forget to complete the fictions if the project calls for them. Purges are made in the masonry seams when facing masonry; these seams are roughly 1.5–1.5 meters apart horizontally and 2.5–2.5 meters apart vertically. Blowing is especially crucial when facing a sealed full brick.
Step 9: The characteristics of the rafter system determine the height of the final row. Apply a cement-sand mortar to the entire brick surface to seal it. Adjust its horizontal level.
Bricklaying for cladding
You must promptly align the seams when working with masonry. Avoid letting the solution set completely; instead, begin the seams approximately half an hour after the masonry. Store-bought or handcrafted tools are used for alignment. Replace them and adjust the surface if you have discovered the answer.
Cement prices and basics of mixtures
Cement and basics of mixtures
When you promptly clean the facing brick surface with the solution, you’ll work more accurately and the cladding will be better and faster.
Basic errors during cladding
- Over time, round recesses appear on the facing brick, professionals call them a wall “shrapnel”. The reason is that the manufacturer of brick grossly violates manufacturing technology, excessive amount of lime was added to the mass. During the increase in moisture of surfaces in raw weather, lime exfoliates (shooting), how much this phenomenon will continue – it is unknown. How to eliminate? Pushed using a reinforcing grid. But it is better to warn – do not buy low -quality and very cheap facing bricks.
Wall "Shrapnel"
Wall of hunger
Condensate of foam
Innate "ventilation"
There is an uneven installation of the jumper.
The jumper is not correctly installed.
Breaks
Regarding the cladding’s binding to the facade wall, this requires a unique strategy. It is advised to bind for added safety; a perforated metal strip that has been galvanized works best for this purpose. Dowels are used to secure it to the wall; the distance varies depending on the material used to construct the carrier wall. For brick walls, the step can be increased; however, if the facade is composed of foam concrete, then fasten the plates more frequently.
Full-bodied facing brick is a classic option to improve the facade of your house’s visual appeal and longevity. Its sturdy construction and organic texture provide a timeless appearance that endures inclement weather.
Full-bodied facing brick has many advantages, two of which are its strength and resilience. Crafted from premium clay or shale, these bricks are meant to withstand severe weather conditions and hold their structural integrity for many years. Because of its durability, which lowers maintenance costs and guarantees long-term protection, it is a wise investment for homeowners.
Full-bodied facing brick offers versatility in design in addition to durability. It lets homeowners achieve a variety of architectural styles—from traditional to contemporary—while maintaining a unified and eye-catching facade. It is available in a wide range of colors, textures, and sizes.
Moreover, utilizing full-bodied facing brick can improve your house’s thermal efficiency. Because of its inherent insulation qualities, it can help control interior temperature, improving energy efficiency and lowering heating and cooling costs.
In summary, full-bodied facing brick is a superior option for improving the external appearance and usability of your home. Its timeless appeal, design versatility, and durability make it the go-to choice for discriminating homeowners seeking to invest in high-quality, long-lasting materials.
