Fleer porcelain

Fleer porcelain, which is renowned for its grace and toughness, is increasingly used to extend the visual appeal and lifespan of building facades. This unique porcelain cladding material is perfect for both residential and commercial applications because it combines practicality with aesthetic beauty.

Produced with cutting-edge methods, Fleer porcelain is distinguished by its delicate yet resilient composition, meant to endure a range of weather conditions without fading over time. For architects and homeowners looking for a facade solution that blends sophistication and resilience, this makes it a dependable choice.

The versatility of Fleer porcelain’s design is one of its most notable qualities. It enables artistic expression in architectural projects and is offered in an extensive array of colors, textures, and finishes. Whether you’re going for a sleek modern appearance or a traditional facade design, Fleer porcelain provides options to suit a variety of personal tastes.

Apart from its visual allure, Fleer porcelain is preferred due to its minimal upkeep needs. Because of its non-porous surface’s resistance to dirt and pollutants, the facade can be cleaned easily and will maintain its original charm with little effort.

Manufacturing technology and main types

Powders are pressed under intense pressure and then fired to create artificial stone. firing temperature of up to +1300 °C and pressing pressure of up to 500 kg/cm 2. The powder is made up of mineral dyes, quartz sand, clay, kaolins, and field sparks. To restore the original appearance, other additives can be applied. Porcelain tiles were first exclusively used as technical tiles; subsequently, they were also used to make flooring and plumbing fixtures. Porcelain tiles have recently been used to cover the facades of numerous buildings.

With porcelain plates, you can carry out intricate architectural designs.

A possible choice for porcelain trim

Porcelain stoves for the facade are not thicker than ten millimeters, in contrast to flooring. If not, the foundation of buildings is negatively impacted by the weight of large structures. Furthermore, not all of the supporting indicators of the facade walls are appropriate for casing with this type of material due to the growing requirements for them. There are no set overall sizes; instead, manufacturers follow their own guidelines. However, using tiles that are too big or small for facades is not advised; they should be at least 40 by 40 cm and no larger than 80 by 80 cm.

Porcelain exterior tiles

Ceramic tiles

Regretfully, local businesses (Kerabud, Estima, and others) are still unable to manufacture large, high-quality tiles that can be used to decorate facades. Expert builders highly advise buying products from Italian or Spanish businesses, such as Alfa Ceramiche and AO Ceramicas Aparici. Dealing with the Chinese is not a good idea because of uneven facade surfaces caused by issues with plate accuracy. The material falls into the pricey category, but it doesn’t have to cost a lot of money, and as a result, it has curved facades made of stylish porcelain tiles.

Table of external surfaces

Porcelain tile qualities for facades

Although porcelain tiles, including glazed and mosaic varieties, are produced by companies, their exorbitant cost prevents them from being utilized for facade decoration. During the manufacturing process, high-precision machines are used to cut the edges of artificial stone to exact sizes. The ease of working with tile increases with its quality and decreases with size deviation. However, because of its high cost, not all customers can afford such material.

The physical attributes of stoneware porcelain

Name	Indicators
Frost resistance	At least 100 freezing/measurement cycles. According to these indicators, the stove can be used in all climatic regions of our country without exception.
Water absorption	The high density of the material and the absence of microports significantly minimizes the ability to absorb water. Water absorption does not exceed 0.05%, this is one of the lowest indicators among all the materials used for the decoration of the facade walls.
Hardness	According to MOOS, indicators are within 8–9, more value only in glass. But high hardness becomes a drawback – there is no plasticity, the material becomes fragile.
Wear resistance	According to international standards, the material is divided into five groups. For facades, the first group is used, in terms of wear resistance it occupies the last place among all types of porcelain tiles. Due to this, the cost of facing the surfaces of the facades is noticeably reduced, and for them wear resistance does not play any role.
Friction coefficient	Din 51130, the minimum coefficient R9, maximum R13 is regulated. For facing plates, friction coefficient is not taken into account.

Wood-effect porcelain stoneware with a ventilated facade

Prices for various types of porcelain tiles

Porcelain stoneware

Advantages of porcelain facade plates

The superior operational characteristics of facing material fully justify its relatively high cost.

The material does not fully support combustion, fire organizations are recommended to create barriers.

The substance is not at all combustible.

Unique facade fixes

Characteristics of the facade for ventilation

Porcelain tiles for faces outperform conventional materials in terms of all indicators. The pricing is the sole drawback; however, when considering additional surface savings and superior design indicators, the high price becomes justified.

The best option for building cladding at the moment is porcelain stoneware for the facade.

White-black exterior with porcelain decoration

Fleer porcelain, which is well-known for both its strength and beauty, provides a sophisticated way to improve the front of any house. This premium porcelain cladding is a preferred option for both architects and homeowners because it not only resists weathering but also gives buildings a classic charm. Discover how Fleer porcelain turns facades into enduring representations of outstanding architecture by fusing functionality with aesthetic appeal.

Step -by -step instructions for the installation of facade porcelain stoves

Vital. Installing porcelain stoves on facades is an extremely responsible task. Don’t take it if you have no experience. Financial resources will be lost significantly as a result of poor performance. Furthermore, a plate that has dropped from a height may seriously injure someone. Ignorantly adhere to all manufacturer recommendations; only use fasteners intended for a particular weight.

There are various structural components that make up the ventilated facade system, or wall cladding plates:

• carrying system. It includes fasteners, vertical and horizontal guides. They are made of a thick -linked galvanized steel; special holes are provided for adjusting the spatial position. Should not only withstand the weight of porcelain stoves, but also a wind load;
• layer of thermal insulation, If one is planned to install. All modern buildings must be thermal insulated without fail, this is provided for by existing regulatory decrees. On old buildings, the decision on additional insulation of the walls is made individually by each owner;
• facing finish stoves. The dimensions and appearance of porcelain tile is selected taking into account the planned design of the facade walls.

An electric drill equipped with a perforator, a rivet installation tool (should the supporting frame be assembled with their assistance), tasty keys, a plumb line, and an extended precise level are needed for this task. A laser level is a great tool because it makes marking much faster and more accurate. You’ll need to use the hydraulic level otherwise.

Fasteners used in porcelain stoneware installation

Before starting installation, remove near the wall, collect the forests, think over the storage places. Be sure to work together, and better three. The final number of people is determined taking into account the size and weight of the plates. It is advisable to draw a wall on paper, indicate its dimensions and first think about the plan for placing brackets, taking into account the linear sizes of the plates and the method of attaching them. Determine the places of fixation of the brackets, calculate their number and linear meters of horizontal and vertical rails. Given the weight, choose dowels or anchor, the heavier the slabs, the stronger the metizes should be.

The layout for assembling the development’s components and porcelain stoves. Choice 1

Determine the locations of entry and output for engineering communications, as well as the number of windows and doors, during the preliminary planning stage. The operational eradication of emergency situations ought to be accessible.

Prior to installing the ventilation facade, accurate calculation

First step: marking the wall. The location of the brackets on the wall must be indicated right away. The stake on ventilated facades includes drawings for where the brackets should be placed. By using them, ascertain the extreme control points.

Vital. The building’s corner, windows, and doorways should all be at least 10 cm away from the brackets in order to avoid any potential breaches of the frame’s strength.

Attach the two upper brackets, place the long plumb line below them, and mark the lowest extremities. Blue rope with vertical lines beat out.

Knot fastened with a kneeler to the building’s wall

Step 2: Beat off the remaining vertical lines at the suggested distance, taking into account the porcelain slab sizes and the manufacturer’s instructions. The majority of facades have bracket spacing of up to 1000 mm vertically and up to 800 mm horizontally when using porcelain plates. Round the resultant values while counting the quantity across the wall, keeping the facade wall’s size in mind.

Step 3: Mark the wall’s corners horizontally with a laser or hydraulic level. Parallel lines with a rope and a blue whip are made. Once the house’s wall has been marked, a mesh with uniform cell sizes ought to show up. Once you’ve verified that everything is in order, drill holes. Remember that mounting the supporting brackets is also required around the edges of windows and doorways.

Step 4: Use a winning drill to pierce. The holes’ depth should be a few centimeters deeper than the dowels’ or anchors’ overall length. It is advised to use anchors for porcelain stoves because they can withstand significant force. Using dowels in construction is risky.

Drilling and marking holes

Prices for Popular Puner models

Perforators

Step 5: Install the brackets in the reach of the reach right away, and then carefully check the fixation strength. Gaskets can be installed between the wall and the brackets to stop the appearance of cold bridges. Use only paronite since it is stronger and does not deteriorate when loads are exposed for extended periods of time. Plastic can bend, which has a severe detrimental effect on the structure’s overall strength. The brackets’ unique holes allow you to precisely adjust their position.

B-shaped bracket for guiding installation

Step 6: Install wall insulation after all brackets have been tightened. Only non-combustible materials and foams that cannot support an open fire are permitted by construction standards and laws. However, it is best not to use it as it releases poisonous substances that are fatal during combustion. Smoke inhalation alone is sufficient to induce unconsciousness several times. Pressed mineral wool is the best option.

The main schematic for the insulation installation

The plan for installing two layers of insulation

Sensible guidance. Choose sheets that are at least 10 cm thick for insulation; thinner materials have a negligible impact, and labor expenses remain the same. However, the ultimate resolution relies on the wall’s thermal conductivity indicators.

Special dowels with large hats are used to attach the glass wool. Install the mats in a checkerboard pattern, pressing them firmly against one another to prevent cracks from forming. The efficiency of heat saving is significantly reduced by any malfunctions in the technology. At least five fixing points should be present for a single standard size. Keep in mind that a gap of two to three centimeters between the glass wool and the wall lowers the efficiency of heat saving by at least 60%. Due to the temperature differential, air convection occurs in the gap; warm air exits and the incoming cold cools the wall.

The order in which the plates are fixed

The insulation is fastened using dowels

Vital. Avoid making significant holes in the load-bearing bracket locations and avoiding adding more heat-loss areas. Determine the approximate location of the bracket and only cut the mat in a cross-hatch or along this line. The particulars of the bracket determine how to cut.

Mineral wool prices

Mineral wool

Water should be consistently kept out of mineral wool. Use a moisture-resistant cloth to close it; a wide variety is currently available for purchase. Avoid using polyethylene film as it will allow moisture to build up underneath it and cause condensation to form in the winter. Mineral cotton wool is getting wetter, and heat-saving values are dropping quickly as relative humidity indicators rise.

The wind-germ plane installation plan

After completing the first phase of the porcelain stove installation, you can move on to the second.

Step 1: Begin installing the horizontal and vertical profiles. This is a critical point in time; if any components are not precisely positioned in one plane, there will be significant challenges when fixing the plates. How should components be installed correctly?

1. Strictly fasten two extreme supporting profiles in level, adjust their position in relation to the wall. Check the spatial position again.
2. Pull the ropes between them and mount the rest of the vertical elements along them. We have already mentioned that fixation can be done with rivets or bolts. Never buy elements that are attached with self -tapping screws, they are made of thin steel and are not designed for heavy loads.
3. After the vertical rails are exhibited, fix the horizontal to them. The more often you check their position, the less disappointment awaits during the installation of porcelain stoves.

Step2: Install the slabs. To fix them, metal basters are used.

Plan for attaching porcelain tiles

The Kleammers look like this when installing porcelain tiles.

Fastening the Klyammers to begin

Attach the two bottom cowls, place the plate over them, and fasten the two top cowls. Due to their two ears, Klyimers are required to hold two adjacent plates. Their position is automatically controlled by this technology, ensuring that the edges always lie in a straight line.

Putting in a porcelain slab

Setting up porcelain stoves

Observing the spaces between the plates is crucial.

Certain Klyimers have unique stops, but the distance between the side faces of the slabs can be visually adjusted. to deal with them more quickly and easily, and the facade wall looks better.

Ceramic border mounting device in the manual

Ceramic border mounting knot on the facade’s inner corner

The feud’s mounting unit on the building’s exterior corner

Step 3: Technological holes should be made in porcelain stoves where there are pipe or electric cable outputs on the wall.

When the frame is installed correctly, work is completed quickly. Keep in mind that during installation, the time lost for marking and attaching supporting components always comes back.

Famed for its grace and robustness, Fleer porcelain is a classic option to complement any house’s exterior. Its unique texture and finish enhance the building’s overall character in addition to adding visual appeal.

Homeowners can benefit from a facade solution that combines practicality and aesthetic charm with Fleer porcelain. It is a dependable choice for long-term durability and beauty because of its resistance to weathering and low maintenance needs.

Fleer porcelain offers design flexibility by coming in a range of hues and styles, enabling homeowners to create a facade that accentuates their architectural vision. Fleer porcelain offers adaptable options for those who prefer a more traditional appeal or a sleek, modern look.

Purchasing Fleer porcelain for the front of your house guarantees both a classy look and peace of mind. It is a wise decision for any discriminating homeowner because of its durability and resistance to fading, which guarantee that your home will maintain its curb appeal for many years to come.

Video on the topic

Facade tiles +998906222275

Large -format porcelain stoneware on the facades of a gas concrete house, insulated PPS16f SFTK wet facade

Porcelain stoneware for the facade of the house. Advantages and disadvantages.

Facade from porcelain tiles