Features of the plaster of external slopes on the facade

Of course! This is a brief synopsis for your piece on "Applications of external slope plastering on the facade":

The facade of a home is essential to its external appearance because it provides both aesthetic appeal and weather resistance. Plastering the outside sloping of a facade is an important part of keeping it beautiful. The inclined surfaces that are usually present on the sides of windows, doors, or any other protrusions from the main wall surface are referred to as these slopes.

In order to ensure durability and aesthetic appeal, plastering external slopes requires meticulous attention to detail and appropriate technique. Slopes, in contrast to flat surfaces, provide special challenges like water runoff, sunlight exposure, and varying angles that call for the expert application of plaster materials.

Plastering external slopes is primarily done to improve weather resistance and stop moisture infiltration while also creating a uniform, smooth surface that blends in with the facade as a whole. In order to achieve these objectives, the proper plaster type must be chosen for the external conditions and applied correctly to ensure long-lasting performance.

The particular factors and methods related to plastering exterior walls will be discussed in this article.

What tools are needed to work with slopes

The following equipment and supplies will be needed to process the window structure:

• Construction trowel.
• Drill.
• Construction mixer.
• Knife.
• Plumb.
• Blood bowl.
• Spatulas of different sizes.
• Water.
• Plaster.
• Metal mesh and fasteners.

Apart from getting the tools ready, you’ll also need to clean the surface after processing it to get rid of extra mounting foam. You can use a knife for this.

External slope plastering is essential for a home’s structural integrity and visual appeal. In order to ensure weather resistance and durability against outside elements like rain, wind, and sunlight, this process involves specific techniques. It’s crucial to comprehend the subtleties involved in choosing the appropriate supplies, readying the surface, and properly applying the plaster. This article emphasizes useful advice for both professionals and homeowners as it examines the important factors and step-by-step techniques to achieve a smooth and durable finish on exterior slopes. This sentence emphasizes the significance of plastering exterior slopes and, without becoming overly technical, outlines the practical considerations. Tell me if there are any changes you require!

Plaster slopes of plastic windows

The window structure is processed in multiple stages: surface preparation, slope insulation, angle and beacon fixing, edge slope decoration, and finishing work.

Insulation of slopes for plaster

Further insulation will be required around the windows to prevent drafts and moisture from entering the space. Similar protocols apply to areas with a humid and cold climate. It is more likely that moisture and cold will seep into the apartment if there is no thermal insulation gasket installed between the wall and the double-glazed window. There’s a risk of mold and fungus growing here. The slopes can be insulated in a few ways:

• Leaf foam. In this case, it will be necessary to additionally waterproof the structure.
• Foam polystyrene. One of the reliable heater that can be insulated with double -glazed windows inside and outside the dwelling.
• Mineral wool. This material is best used to warm windows outside.

After cutting the insulation into pieces, it is glued to the base or frame of double-glazed windows and covered with a metal mesh. Putting plaster on the structure is the last step.

Strengthening angles

To make the angles stronger, do the following:

1. Apply the solution to the corner.
2. Spread it with a spatula along Luzga.
3. Put the Serpyanka strip on the material.
4. Apply the construction composition on top, smooth it with a spatula.
5. When the wet facade dries, it should be wiped.

Bolstering the periphery as they swiftly escaped. You can use angular profiles (countoles) for this. The process is executed as follows:

1. Measure measurements and cut off the corner profile of the desired size.
2. Apply plaster to the corners on both sides, flatter it.
3. Attach an angular profile, press it into a wet solution. At this time, it is worth monitoring the vertical of the level.

The last step is to apply a layer of plaster and use a spatula to level it.

Fixing beacons

You must fix the beacon profiles before you can plaster the window slopes. When using lighthouses:

• Plastic or metal profiles.
• Plywood, which is attached to the corner zone on screws.
• The path from the solution.

Screw three self-tapping screws into window slopes to secure the beacon profile. Smears of plaster solution are applied along the sloping line, above the line where the self-tapping screw hats should be. The lighthouse profile is screwed into place, pressing the structure into the plaster that has been used to cover the inclines. Plaster solution is applied to the surface to solidify the outcome.

Plaster slopes by lighthouses

It is far simpler to plaster slopes near lighthouses:

1. Put a label on the window system, from which the start of work will go.
2. Put a spatula on the surface. One part of it should be at the level of the mark, the other – to rest against the wall.
3. The part that rests against the wall should be pushed back by 5 mm. The formed space will be filled with a layer of plastering mixture.
4. Fix the first lighthouse near the set label.
5. Set the second lighthouse near the slope. As a result, it should be extended by 5 mm.

Recognize that the system has been installed correctly by using a spatula. An angle is created toward the slopes if it is fastened to the lighthouses. When applying plaster, you must determine the best angle and begin using cement mortar.

Finish bringing work

On the slopes, you must wait for the plaster layer to dry before beginning finishing. Following that, you can clean the glasses’ protective coating and any sporadic splashes on the walls and double-glazed windows. Painting or applying construction facing compounds to the plaster layer are two options. The surface is meticulously cleared of lumps, tubercles, and irregularities before the solutions are applied.

It is essential to comprehend the subtleties of plastering external slopes on a facade in order to guarantee structural integrity and visual appeal. The procedure entails painstaking surface preparation, which may include cleaning and/or fixing any damage or imperfections already present. In addition to improving the facade’s aesthetic appeal, properly applied plaster acts as a barrier against the elements, including sun, rain, and snow.

Factors like climate, sun exposure, and the building’s overall design are important to take into account when selecting the proper plaster for external slopes. Plaster comes in a variety of forms and offers differing degrees of durability and visual appeal, from more conventional cement-based mixtures to more contemporary acrylic or synthetic alternatives. It’s critical to choose a plaster that will not only blend in with the architectural style but also successfully withstand the climate where you live.

Plastering external slopes requires expert workmanship to produce a consistent and smooth finish. The facade can be given more depth and personality through techniques like texturing and rendering, which will improve its aesthetic appeal. In addition, maintaining the plastered surfaces properly after application is essential to extending their lifespan and avoiding problems like color fading or cracking.

To sum up, mastering the methods and supplies needed to plaster a facade’s exterior slopes is essential to creating a long-lasting, visually appealing exterior. Homeowners and professionals alike can guarantee that the facade not only looks amazing but also endures the elements for years to come by knowing the unique requirements of the building and environment.

Video on the topic

Sloping slopes detailed master class. Part 1.

How to plaster slopes on the facade? The basic principles of applying a thick layer!!!

Never do plaster slopes because … #164

All about facade slopes on the windows | Technology and secrets | Construction educational programs

Proper plastering of window slopes in the SFTK wet facade, the plastic plane is closed by the base

⚫ What to close the installation foam on the windows? Do not repeat this mistake!

I saw how they make high -quality slopes on the windows in 1 hour, without plaster, from scraps and residues