Features of linear panels for facades

Modern buildings are made more aesthetically pleasing and functional with the use of linear panels for facades, which are adaptable and useful solutions. Architectural exteriors can look sleek and modern with these panels, which are usually made of metal, composite, or PVC materials. Their linear form gives the facade a sense of consistency while also enabling different installation patterns that give the facade depth and visual appeal.

The resilience to weather and long lifespan of linear panels are two of their main characteristics. These panels offer long-term building envelope protection since they are made to resist extreme weather conditions like UV rays, rain, and temperature changes. Because of their durability, they can be used in commercial and residential settings, guaranteeing that the facade will hold up structural integrity and beauty over time.

The simplicity of maintenance associated with linear panels is another benefit. These panels, in contrast to conventional facade materials, are frequently made with protective coatings or finishes that are easy to clean and resist dirt buildup. By requiring less resources for maintenance, this low-maintenance feature improves the building’s sustainability while also lowering ongoing maintenance costs.

Device and description

The panels are structurally composed of an aluminum or steel profile with closed or open end portions. A decorative layer is applied to the surface of the panel, which also serves as protection. They resemble facade cassettes in appearance, but they are longer.

0.45–1 mm thick profiled steel or aluminum sheets are used as raw materials for manufacturing. The surface is coated with coatings made of polyester, acrylic, polyurethane, polyvinyl chloride, and polyvinylenfooride. Their colors are chosen by special catalogs and match those of standard color cards.

The dimensions of the object’s walls, or the design measurements, are taken into consideration during the panel production process. As a result, unlike profile sheets, they do not require adjusting in width or height during installation. Therefore, by reducing the number of connecting joints, the facade is protected from mechanical damage to the greatest extent possible.

Embossed or smooth surfaces are both possible.

The mount is done using one of the following techniques using specialized guides:

• Docking with gaps between panels about 20 mm;
• The panels are mounted on the way.

The criteria for decorative properties and operating conditions are taken into consideration when choosing the consolidation method.

The following variables affect the cost per square meter:

• the size of the panels;
• mounting method;
• Type of protective coating.

Main characteristics

The following technical features are available for linear facade panels:

• operation at ambient temperatures from -50 0 C to +50 0 s;
• The average service life is up to 30 years, depending on the type of protective coating;
• The length of the panels varies within 0.9-6 m, and the width is 135-400 mm;
• metal thickness 0.45-1 mm;
• The weight does not exceed 7 kg/m 2, depending on the thickness of the material and the coating;
• compliance with the class of non -combustible materials;
• High resistance of the coating to ultraviolet radiation, sharp temperature differences.

The main manufacturers

Numerous producers create linear panels with a range of features and attributes. It is crucial that you familiarize yourself with the suggested assortment in order to make an informed decision. The following businesses’ products are offered on the domestic market:

• Metal-profile;
• Group of Companies "Steel Construction Company";
• OLMA;
• First roofing factory;
• Enterprise "Special Roll".

It’s critical to consider the product’s quality, price, manufacturing process, and availability. The pricing of roughly identical structural properties can differ significantly based on the brand’s level of popularity.

Metal profile

The Russian manufacturer of the linear facade PRIMEPANEL FASTALS has a smooth or profiled surface and both open and closed ends. Width and length range from 0.7 to 1 mm and 0.9 to 6 m, respectively. Polyester, Colorcoat Prisma, and PVDF protective coatings are utilized.

Every product produced by metalprofil is created with extreme precision and rigorous adherence to geometry utilizing cutting-edge technologies. designed to be installed on buildings diagonally as well as in any direction. There are versions with a gap of up to 2 cm or with a continuous casing. The same brand of steel is used for continuous elements as it is for facade panels.

Steel Construction Company Group of Companies

Under the Steeline brand, the group of companies manufactures polyester-coated metal panels with smooth or textured surfaces. The galvanized steel has a thickness of 0.5-1 mm and a standard length of 0.5-6 m. Color coatings adhere to the RAL standard. The panels can be used anywhere and are appropriate for lining both commercial and residential buildings.

The "SIG" and "Smooth" profiles are accessible. Suitable for mounting on both horizontal and vertical unloaded surfaces. It is acceptable to face intricately shaped walls. When placing an order, the manufacturer chooses all extra components on their own, including docking fasteners, corners, adjacent planks, and tows.

OLMA

The Russian company’s products are known for their affordability, flexibility, resistance to high humidity, and wide color selection. intended for use as lining in industrial, commercial, agricultural, and production facilities. Steel sheets come in the following dimensions: width: 188-358 mm, length: 0.5-4.5 m, thickness: 0.55-1 mm.

The business provides panel manufacturing and installation services for three to five days. Installation can be done in a visible or hidden way. The panel is flexible enough to be fixed to cylindrical, curved, embossed basics. Mounts can be horizontal or vertical.

The first roofing plant

The galvanized steel models, ranging in thickness from 0.45 to 1.5 mm, are available in both closed and open configurations from the Russian manufacturer of liner-type panels. The products’ length and thickness, as well as their configurations with or without rust, are customizable by the customers. As per the RAL color card, a vast array of colors are available.

The lining of ceilings and walls is the primary area of focus. There are models made in different heights that are easily chosen for particular installation situations. differ from equivalents in terms of low cost, high quality manufacturing, and resistance to corrosion.

Enterprise "Special Roll"

The manufacturer creates panels with a smooth or corrugated surface composed of sheet steel that ranges in thickness from 0.5 to 1 mm. There is a range of 90 to 400 mm in width. Powder coloring is used to apply the polymer coating, and the colors meet RAL standards.

Because the company uses state-of-the-art machinery to manufacture its metal products, it can guarantee precise geometric compliance and superior processing. It is less expensive than its foreign counterparts without sacrificing technical attributes.

There are three possible production dates. Panels may be supplied without an outer layer of protection.

Features of installation

Buildings with linear facade panels are only constructed after operational and technical conditions have been assessed. It is crucial that the basis’s bearing capacity be sufficient to support the weight of installed structures. Deformation of the panels or coating exfoliation can be prevented by carefully examining the requirements for operating conditions.

It is necessary to calculate the total amount of material and carefully choose the ideal facing strip sizes, so design work must be implemented. The estimate is created, and the total financial costs are calculated based on it.

Applying marking is the first step in the installation process. Marking the locations of the bracket attachment points as precisely as possible is necessary; make sure the placements are correct. A typical separation of 0.5–1 m is chosen between them.

It is necessary to place thermal straps beneath the brackets. Their primary functions are to smooth out the walls and account for the variations in the coefficients of expansion due to temperature. It is imperative that the guides be fastened in a single plane to avoid distortions and damage to the finishing material.

Special additional elements must be installed where doorways, window openings, or other designs need to be adjusted. It is advised to place your order directly with the panel manufacturer to ensure that the fasteners and materials match.

Installing the supporting guides is required where there are surface fractures. They will improve resistance to wind loads and aid in achieving the proper surface shape.

You will need to use polymer dowels or special adhesive compounds to secure the panels. The mounting technique is chosen with the manufacturer’s specifications and the mass of the structures in mind.

Technical conditions dictate the styling direction with visible mounts. invisible performed in a left-to-right or vertical-to-bottom manner on skin that is horizontal.

Linear panels for facades are versatile cladding solutions that enhance the aesthetic appeal and functionality of modern buildings. These panels, characterized by their streamlined design and uniform appearance, offer a range of benefits. They provide a sleek, contemporary look while effectively protecting the building from weather elements like rain and wind. Their modular nature allows for easy installation and maintenance, making them a practical choice for architects and homeowners alike. Additionally, linear panels come in various materials such as metal, composite, and timber, offering flexibility in design and durability. Whether used to achieve a minimalist facade or to add texture and depth to a structure, linear panels are a popular choice for enhancing the overall look and resilience of building exteriors.

Advantages and disadvantages

The following are the primary benefits of liner-type panels:

• Simple installation technology: fitting structural elements, there is no need to cut the panels, installation on the bearing base from any material in a horizontal or upright position;
• the minimum influence of temperature differences due to the sliding type of fasteners;
• hidden fasteners;
• unpretentiousness in care and maintenance;
• lack of toxic substances;
• long service life compared with other materials for facing ventilated facades.

The following are liner facing panels’ drawbacks:

• low anti -vandal resistance due to the thickness of the metal up to 1 mm;
• high thermal conductivity coefficient, additional wall insulation is required;
• In case of damage to the protective layer in steel, foci of corrosion occur;
• accumulation of a static charge, the installation of lightning rod is required.

Facade linear panels provide a contemporary and adaptable way to improve a building’s external look. These panels have a smooth, linear appearance that can produce a modern, tidy aesthetic. They offer a variety of materials, including metal, composites, and even finishes that resemble wood, so there is flexibility in terms of design options.

The resilience to weather and long lifespan of linear panels are two of their main benefits. They are often treated to resist fading, warping, and corrosion because they are made to withstand tough outdoor conditions. Because of this, they can be used in a variety of climates and provide long-term performance with little upkeep.

Because they can produce uniform and seamless facades, linear panels are preferred by designers and architects. Depending on the orientation of the panels, various architectural expressions and visual effects can be achieved. Their adaptability to different building styles and design preferences makes them appropriate for both new construction projects and renovations.

In addition to being aesthetically pleasing, linear panels support sustainability and energy efficiency. Certain panels have insulating qualities built into their design, which helps to enhance a building’s thermal performance. In addition, they are a green option for sustainable building methods due to their durability and recyclability.

Video on the topic

Materials for the facade: linear panels, facade cassettes, siding, professional

The use of contrasting linager panels for facing an administrative building

Linear panel – bend the leaf beam. Alfa-Stal workshop. galvanized elements.