Facade glue for nets

For external work, a unique facade grid serves as a protective covering. It is typically utilized in various finishing tasks and works directly to securely fasten the plaster solution. The facade grid is most frequently used for compaction of joints or angles, plaster restoration, waterproofing, and the fastening of reinforced plaster.

As a result, the finish material’s mechanical strength greatly increases and tiny cracks do not show up on the surface. This is particularly valid for big, tall structures.

In contemporary installation work, special loads are placed in addition to the facade mesh. This is required to ensure that the finish layer’s integrity is not compromised by abrupt temperature changes. Thus, there are currently four types of mesh: fiberglass, metal, plastic, and fiberglass.

Advantages of facade grid and plaster

Correct completion is necessary for facing work to have an appealing appearance and last for a long time. This holds true for both the method and the actual quality of the building materials. Consequently, despite all requirements, high-quality work is produced over an extended period of time.

Facade plaster has the advantages of having a good appearance, being versatile in terms of installation options, and not requiring restoration for a long time. Regarding the facade grid, all the benefits are obvious in this instance. This:

• additional protection of plaster from the appearance of possible cracks;
• fastening of joints and small cracks on the walls;
• ease of work with different finish mixtures;
• The fiberglass promotes convenient alignment of the plaster layer;
• contributes to the passage of air through the walls;
• The fiberglass cannot be decomposed when exposed to various alkaline components.

Facade grid laying technique

Preparing the surface is necessary before installing the facade mesh. Brick, slabs, or slag block—whichever the building material, the wall needs to be prepared.

Work on installation is completed one at a time:

• If possible, the walls are processed by Kerher and dried for several hours in good weather;
• All fat spots are treated with a special degreasing solution;
• All irregularities and small cracks must be covered with ordinary starting plaster, which is directly the first layer;
• After drying, you can apply a second layer of plaster on top and immediately apply a facade mesh on top of it on top;
• The final work consists in the final leveling of the wall using special building mixtures.

Above all, this technology is simple and stands out for its high caliber. We can say that decorative plaster and facade mesh are meant to function in tandem because decorative plaster is maintained at the expense of the latter.

What other net options are there?

There is a specific facade grid, but building supply stores also provide an even greater selection of these nets for facing work. Whichever reinforcing grid is selected, it should always function as a foundation for fastening.

These days, you can find more specialized fiberglass nets for facing work in construction stores. It’s also important to note that this type of fiberglass mesh is incredibly strong and effective at filling in fairly deep cracks. Comparative indicators showing the strength of fiberglass and standard facade mesh are similar in their positive aspects.

Modern building materials also include the direct use of metal and fiberglass grids in the facing facade. Large-scale construction projects frequently employ this kind of grid because of its strength, durability, and usability.

The following are this grid’s benefits:

• Like a metal -sized metal network, resistant to severe frosts and sharp temperature changes;
• prevents the appearance of cracks;
• On sale there is fine -grained and coarse -grained, which is very convenient for choosing large -scale work and small work;
• widely used to fix the bulk floors;
• The fine -grained mesh can be applicable for facing the internal walls.

Choosing glue for facade nets

Apart from being directly applied to the plaster, the facade mesh can also be adhered to using a specific type of glue. When compared to other building materials for facing work, this glue has a lot of advantages. He is impervious to frost, unafraid of abrupt temperature swings, and intolerant of excessive humidity.

Since this glue doesn’t include any substances that are bad for the respiratory system, it can be used indoors in homes or businesses. However, the surface needs to be prepped beforehand. There should be no more significant cracks and the surface should be dry and grease-free.

In order to prevent premature drying, it is advised to leave the finished glue for two hours after kneading. It should be kept in mind that if additional glue needs to be applied, you must wait a specific amount of time after applying the first layer. Every layer ought to last for at least a day on average.

Observing the following guidelines is advised to ensure that the glue adheres to the facade mesh properly:

• The temperature on the street should not be below five degrees of heat;
• Each next layer of glue for the facade is overlapped and also applies to the facade mesh;
• glue should be applied evenly and not a very thick layer, otherwise it may simply appear premature cracks.

What to beware should be?

Currently, there is an enormous variety of nets available, and different manufacturers can provide imitations, whether the net is made of metallic or fiberglass. It is therefore best to seek professional advice if selecting a facade grid and lining with different facing materials is necessary.

Indicators of the grid’s stability in the face of numerous influencing factors must be considered if this is not feasible. It is also important to consider the grid’s overall integrity. It should not be torn, and the seams should be even throughout. It is best to select a different option if any defects were found during the examination.

This is particularly true for fiberglass grid, as it needs a gentler circulation than metal grid. Although fiberglass is much stronger than metal, it needs to be handled more carefully.

Selecting the appropriate facade glue for nets is essential to guaranteeing the longevity and efficiency of the external insulation system on your building. This glue is essential for firmly securing insulation nets to a variety of surfaces because it provides weather resistance and structural stability. You can choose a glue that offers the best adhesion and longevity by being aware of the particular requirements of your project, including the surface materials and climate. Making an informed decision is crucial to obtaining a dependable and effective facade solution because factors like application ease and compatibility with insulation materials also affect your decision.

A specific plaster facade grid must be used to ensure that the plaster on the walls of the house holds tightly, does not crack, and does not swing. Her personality types.

Video on the topic

Installation of corners with a mesh, the device of the basic reinforcing layer, in glue CT85, weigate the Bautex mesh

The basic reinforcing layer of glue Ceresit CT190 Winter and Fasadpro Fasadpro 2000 165 g/m2, 5×5 mm

Glue for insulation. Secrets and features of work. Briefly and in case.

Thermal insulation of the facade.Insulation of the house.Glue for reinforcing polystyrene foam.Facade.Thermal insulation.Ceresit

Styrofoam. Facade. Glue for vs glue adhesive for polystyrene foam. Comparison.

The technology for installing corners with a Bautex grid at the corners of window and doorways, fueling in glue