Description and decoration of the facade of a house in the high-tech style

The high-tech facade design is a popular option for modern homes because it combines sleek aesthetics, functionality, and modernity. High-tech architecture is characterized by geometric shapes, clean lines, and a minimalist style. It places an emphasis on technological components that are smoothly integrated into the exterior of the building.

High-tech facades are characterized by the use of industrial materials like steel, aluminum, and glass. These materials improve durability and energy efficiency in addition to adding to the futuristic appearance of the style. Common features include large windows and reflective surfaces, which encourage the intake of natural light and produce a striking visual effect.

Neutral colors like white, grey, and black are frequently used in high-tech facade color schemes, which are sporadically broken up by striking accents or metallic finishes. This color scheme highlights the modern appeal of the style while allowing for customization to fit various architectural settings.

Characteristics

A house like this is hard to mistake for another because of how different it looks. Small cube-shaped homes or expansive multi-story mansions made of intricate geometric block structures can be among them.

The style’s defining characteristics are as follows:

• the widespread use of concrete, metal, glass, plastic;
• lack of symmetry;
• restrained colors (tones are mostly cold);
• lack of small architectural elements, decor.

Every home is characterized by a thoughtfully planned layout with an emphasis on practicality, functionality, and ease of use. As a result, many homes’ interiors may appear straightforward. However, the Hai-Tek style home is incredibly affordable, which naturally offsets the cost of building.

Without a jumper, windows are typically very large. It is acceptable to have a panoramic window. The building has an amazing appearance thanks to its fully glazed facade, which also makes the most of natural light. High-quality glass should be UV-reflective and shock-resistant. In many of these homes, windows are concealed by metal roller shutters.

When it comes to finishing, cold, neutral colors like black, white, green, and various shades of blue and gray are frequently preferred. Although the facade can be made entirely black and white, it is preferable to use two or three colors—you can even use contrast. Warm wood tones are used sparingly as the primary background, only as accents.

Materials for construction

The primary geometric forms of buildings designed in this avant-garde style are accurate ones. Different versions of cubic and rectangular structures can be combined. Numerous large awnings, projecting features, and niches. Typically, the roofs are flat or have one side. Frequently, they will have a sports field or a vacation area. Alternately, you could partially glaze the roof to restore the interior to its original appearance.

You can take monolithic reinforced concrete slabs or ceramic blocks to meet the demands. Brick is also not used very often. Frame technology can be used to build houses, which are then filled with glued SiP panels inside steel structures. Hardened glass, plastic, and polycarbonate are the materials chosen for the partitions; wood is essentially not used.

External finishing typically uses artificial materials like plastic and glass. Composite panels in various colors are frequently selected for casing—you can even add a mirror coating if you’d like. In the event that the premium class finishes are offered, the reinforced glass is matte, tinted, or transparent. Corrugated board is a low-cost option. However, three different finishes are typically applied, allowing you to draw attention to the separation between the ceremonial and household areas.

Wood, natural stone, porcelain tiles, plaster, and fiber cement panels can all be combined with different finishes.

Stylistic directions

Every style has multiple directions, and the one that was offered was no different. Although high technologies are pervasive, there are various ways in which they can be expressed architecturally.

1. Geometric. Very popular direction. Such houses have an unusual look, non -standard proportions. Cuba shape is the easiest option. Complex designs from different modules are more welcome here. Modern materials are selected for decoration, the facade is carefully illuminated. Communications are hidden inside the building, the walls are plain and smooth.
2. Industrial. Similar to loft style, only execution is more technological. The main attributes: glass and metal elements against the background of concrete walls, pipelines, steel jumpers. Most of the communications are usually taken to the facade. The finish is made of artificial materials, the colors are cold.
3. Bionic. Here new technologies are combined with natural materials. There is no strict geometry, complex structures. Architectural lines should imitate natural. Well, the dwelling will fit into the surrounding landscape. Color scheme: light warm.

Facade decoration

Building a high-tech home from the ground up is undoubtedly very difficult, but it can be styled to your liking. And even with a gable roof, this is totally doable. Selecting the appropriate materials is crucial. Plastered walls work best when combined with composite panels.

To make the facade look even more amazing, you can add both light and dark panels. Even matte and mirror options are available. It is best to begin by drawing a sketch of the house, making sure to include distinct colors for each type of decoration. For example, the front of the house should have light cladding, while the rest should be plastered. It is simpler to assess the front of the work and choose the best spot for the future sheathing when a sketch is used.

Next, the sites’ borders are inked on the wall. To determine how many materials are required, precise measurements are taken. But there is a margin when buying the quantity of panels.

We explore the sleek and minimalist design principles that characterize this modern architectural approach as we examine facades in the high-tech style. This post walks homeowners through the essential components of a practical yet fashionable exterior, like clean lines, the use of contemporary materials like glass and metal, and the incorporation of cutting-edge technology. Learn how to create a futuristic facade that strikes a balance between innovation and practicality, whether you’re thinking about making major changes or small adjustments.

Surface preparation

Installing and covering Although they are carried out differently, both cases should have a solid and faultless foundation. First, the facade’s lanterns, cornices, gutters, and platbands are taken off. After that, the entire wall surface is scrubbed with a brush to get rid of any dirt and old paint. A grinder fitted with a specific nozzle can be used.

Then the holes, deep slits, and fractures are sealed. Here, a cement-sand mixture is required. A cell is used to apply reservations, clogging the purified holes tightly before the surface is aligned. A primer is used when the solution has dried.

The reason "wet" procedures are done in the first place is that the solution can discolor other surfaces. If additional thermal insulation for the house is required, plastering can be done directly on the base or insulation.

It is worthwhile to take into account the insulation option since it will guarantee that the house is always warm. Cement and sand can be used as the solution, but it’s best to buy factory plaster mixture that contains hydrophobic additives. She fits nicely on the surface and won’t shrink with time. It’s important to knead it properly. Additionally needed for work will be:

• glue for polystyrene foam;
• foam sheets;
• trowel or spatula;
• level;
• basement bar;
• Polyurethane ironing iron;
• reinforcing mesh.

The procedure for insulating the facade will be as follows:

1. The boundaries of the cladding areas are first marked on the wall, the vertical is determined using a plumb line. Then the lower boundary of the finish is planned in terms (it is horizontal).
2. The holes for fasteners are drilled on the lower marking (a step of twenty centimeters), dowels are inserted, a basement bar is made, the level is applied. If the bar is horizontally, then it can already be fixed with self -tapping screws.
3. A special glue on the sides is applied to the first layer layer layer, then in the middle in separate strokes. The insulation is installed with the lower edge on the base bar, aligned vertically, pressed. The next layer is attached close to the first, and so on to the very end. The second row is glued in the same way, only the seams are shifted by half the width of the layer. So that there are no vertical deviations, it is necessary to control each row with the level.
4. After the solution dries, it is necessary to additionally fix with dowels.
5. Before plastering, the surface of the insulation must be primed. It is better to choose a primer with a quartz filler to ensure high adhesion of materials.
6. Then a plastered solution is applied with a spatula with uniform movements. A mesh is necessarily applied on top, “drowning” it in the solution. Mesh in adjacent areas usually laid down ten centimeters.
7. Then the surface is wiped with circular motions using a plastic grater. Dust is removed from the surface with a brush.
8. Now the wall is again primed. And you can proceed to the finish align. For this, the solution is applied with a very thin layer, rubbed with a spatula. The layer of plaster should be very even and smooth.

Grout with a metal or polyurethane grater as the testing step. Usually, the completed plaster is painted, but this is done after the cladding is installed.

Facing with composite panels

The guides must first be installed and marked because they are fastened to the crate. A crate is made with galing profiles.

1. It all starts with markings. It is necessary to retreat from the edge of the plaster five centimeters, determine the vertical, make a tag on this line every fifty centimeters. Then step aside half a meter, repeat the actions.
2. Now at every planned point, holes are drilled, dowels are inserted. A bracket is applied, a gasket of plastic or paronite is inserted between it and the wall, fixing the fastener with a bolt. The rest of the brackets are attached similarly.
3. In the plates, slots are made and the material is strung on the brackets, extending the ears in the created holes. Insulation slabs should fit tightly to the base. A windproof film is attached on top of thermal insulation.
4. The guides are mounted on the brackets, the vertical is controlled by the level. Two rivets fall on one bracket. Spacer plates are inserted into the profile cavity, with their help the panels are fixed.
5. Now the first panel is attached to the lower part of the created frame, is aligned, borrowed by self -tapping screws. Spitter slopes are exhibited at side brackets, fixed with rivets or screws to the guides.
6. The second panel clings to the slopes of brackets, the seam is aligned under the ruler, the corners are fixed with rivets. The rest of the panels are attached similarly.

As each panel will be precisely positioned above the preceding one, the installation of succeeding rows can already be completed without causing any seam displacement. Plastered areas still require painting, so you do not need to take off the protective film from the panels right away after facing.

The sleek and contemporary look of the high-tech house facade design places an emphasis on modern design, functionality, and simplicity. This minimalist style, which is defined by straight lines, geometric shapes, and a minimalist approach, frequently uses materials like concrete, steel, and glass to create a modern appearance.

When adorning a home’s exterior in a high-tech manner, concentrate on incorporating industrial components to highlight the architectural details. Large windows that often reach the ceiling are a common way to optimize natural light and establish a smooth transition between indoor and outdoor spaces. This futuristic look is further defined by the asymmetrical compositions, smooth finishes, and metal cladding.

High-tech facades usually have color schemes that lean toward neutral tones like black, white, and gray, occasionally boosted by strong primary color splashes. This minimalist color scheme adds to the facade’s overall tidy and uncluttered appearance in addition to enhancing the modern design.

Think about using technological components like automated features, integrated lighting, and sustainable materials to create a coherent high-tech facade. These upgrades fit in with the forward-thinking, creative spirit of the high-tech style while also improving the house’s functionality.

Video on the topic

Fantastic house | High-tech | Minimalism | G.Krasnodar

Special facade of the Hai Tack style house! First stage. Facade of a High-Tech House. Part One

Special facade of the Hai Tack style house! Second phase. Facade of a High-Tech House. Part Two