Camedomic decorative plaster

For home facades, camedomic decorative plaster is a creative solution that blends practical advantages with visual appeal. Camedomic plaster, in contrast to conventional plaster finishes, has a distinctive textured appearance that resembles natural materials like clay or stone. This ornamental coating offers a barrier against environmental factors in addition to improving a building’s aesthetic appeal.

The versatility of Camedomic plaster is one of its most notable qualities. It can be used on a variety of surfaces, such as brick, concrete, or even wood, and is therefore appropriate for a broad spectrum of architectural tastes and styles. This plaster adds a unique character and charm to both historical and contemporary buildings.

In addition to its aesthetic appeal, Camedomic decorative plaster is prized for its dependability and low upkeep needs. After application, it creates a strong shield that protects the facade from environmental elements like moisture and UV rays. This prolongs the building’s life and lowers long-term maintenance expenses in addition to maintaining the building’s external beauty.

The application method of Camedomic plaster is another benefit. This plaster can frequently be applied in a single coat, saving on construction time and labor costs. This is in contrast to some traditional finishes that call for lengthy preparation and drying periods. It is a recommended option for both new construction and renovation projects due to its simplicity of application.

What is a pebble decorative plaster

The primary issue with plasters about 20 years ago was the presence of different-sized stones in a mortar made of cement and sand. They had to use their hands to scrape off the deep stripes that the grout left on the surface before applying more grout. There was no purchase back then, so the sand was carefully sifted through tiny sieves to eliminate such phenomena.

Pebbles used to be considered a deficiency, but thanks to modern materials technology, their presence has become necessary. Nevertheless, the size of the pebbles determines how the plastered surface will look. Cement on a small thickness does not provide the desired layer strength because decorative plaster is applied in thin layers, making it inappropriate to use cement as an astringent element.

Quartz sand adorned acrylic pebble plaster

Synthetic binders are used to create camber stucco. In addition to having a strong hold on individual components, they are also very flexible and elastic; cracks on the plaster are completely prevented from appearing, even in the event of significant base ruptures and deformations. Acrylic, silicate, or mixed bases are used to create camedium plasters.

A pebble plaster can be made of artificial stones, granite, or marble depending on the decorative filler used. D. Depending on the finishing technique and stone size, the coating’s structure varies. Based on these cues, this type of plaster is referred to as "Venetian," "fur coat," "bark beetle," etc. The material is used for both decorative plastering of the interior surfaces and decoration of the facade walls.

The facade’s decorative plaster

Camedomic decorative plaster’s adaptable and long-lasting qualities improve the external aesthetic appeal of buildings. This kind of plaster combines practical advantages like longevity and weather resistance with aesthetically pleasing components like textures and patterns. It can be used with a variety of architectural styles and offers architects and homeowners a broad range of design options, from traditional motifs to contemporary artistic expressions. In addition to adding aesthetic appeal to facades, camedomic plaster acts as a barrier against environmental factors, guaranteeing both practical durability and visual appeal.

Types of pebble plaster

It is impossible to cover every manufacturer and brand of their products in one article. Since there aren’t many significant differences between them overall, we’ll limit our discussion to the most well-known professional brands of Cerezite. Many domestic businesses licensed by the original manufacturer operate under this brand.

Pebble sizes range from 1.6 mm to 4.0 mm.

The pebbles range in size from 2.0 mm to 4.5

2.5 mm Ceresit CT 72

Only positive temperatures may be used for all mixtures, and the total amount of time used from the point of cooking cannot exceed 60 minutes. The surface must be primed in two layers, with no passes permitted during the primering process, to improve adhesion. Clean water at room temperature is used to prepare finished solutions, and an electric mixer or a manual mixer can be used.

The price of a construction mixer

Construction mixer

For greater uniformity in the prepared material, the mechanical method of preparing pebble plaster is preferred. Periodically mixing the composition, preventing the solid additives from settling, and separating the solution into distinct fractions are all necessary during the work.

Prior to plastering, the surfaces need to be cleared of any debris and large crevices and cracks. These are broad suggestions for covering building facades with any kind of decorative pebble plaster.

Prices for popular types of packed plaster

Cameshopic plaster

Applying tricolor decorative plaster manually

For illustration, we’ll use three colors and three distinct sizes to create one of the trickiest plastering options for facade walls.

Step 1: Take away the facade walls’ dimensions, excluding the openings for the windows and doors. Determine the entire area. This information will be useful in figuring out how many materials are needed.

Measure the walls and determine their area using roulette.

Purchase a single 25-kg bag of plaster in reserve at all times. Working with a reserve makes things calmer, and it might be useful for aesthetic repairs. Remember that the minimum thickness of the layer is determined by the maximum diameter of the pebbles; the diameter that they have will determine the thickness of the layer. Only in the recesses is there room for a parameter increase.

Take note of the pebble plaster’s grain sizes.

Acquire stucco with a profit

Step 2: Set up the workspace and equipment. You’ll need a heap, a metal grater, a wide and narrow spatula, and a mixer for the task.

Installing construction forests is step three. They can be independently constructed out of rented metal or lumber. The second option is preferable since it speeds up work significantly, increases worker safety, and improves the quality of plastering the facade walls. Wooden ones should only be installed by skilled builders, and even then, only when the lumber has been disassembled and can be utilized to build a house. Purchase them especially to create forests.

Step 4: Locate the zones where different stucco brands and colors are used. For instance, we provide the color white for the building’s upper third, yellow for the middle section, and brown for the lower third of the facade wall. These hues are not accidental choices. The two light uppers visually raise the facade walls’ height, making the lower brown appear less soiled and giving the building an air of prestige.

The size of the pebbles in facade plaster varies as well as the color schemes. The lowest (Ø up to 1.0 mm) in the top third of the wall, the average Ø up to 2.0 mm, and the lowest diameter up to 3.0 mm. To get this effect, we need to apply a thicker layer of plaster; the larger the diameter of the pebbles.

Grains of mineral plaster

The thick layer has increased indicators of physical strength, and mechanical damage is most likely to occur in the lower part of the building. The addition of the powdered mineral dye mixture causes a change in the plaster’s color.

Always begin with the top and work your way down. If the opposite is done, new plaster may fall on top of an already-made layer, in which case it will need to be removed. These are time expenditures that result in a marked decline in worker productivity. Furthermore, multicolored plasters may leave artificial traces.

Step 5: Mark the wall of the facade. Note two lines that run the entire length of the house in a horizontal orientation. Measure the entire height of the walls first, then split the result into three equal parts. It will be each plaster color’s width. Then, beat off two parallel lines with the ropes with a blue and the level. Using the water level is preferable as the ordinary method yields a large error.

Step 6: Assume that there are even lines with slender wooden rails. Take tiny cloves that are no longer than three centimeters and cut them to a thickness of about one centimeter. Not critical if they don’t reach the base completely. Being able to hold a rake is crucial. There are less issues if decorative plaster is applied to the foam. You will have to endure some discomfort if the base is standard cement-sand plaster.

Step 7: Add a dry mixture to the container after adding water. The water content per kilogram of the mixture is specified in the usage instructions; precisely follow the suggested ratios. It is not advised for beginners to experiment, as only experimental plasters have the ability to alter them while taking the surface’s characteristics into consideration. Stir the mixture well. The existence of arid masses is strictly forbidden. Allow the mixture to sit for five to eight minutes before using.

Prepare the blend, add the water, and combine the ingredients.

Step 8: Continue plastering the front wall’s upper third. You should go into greater detail regarding manual technology.

1. Put a finished mixture on a large spatula with a trowel or a small spatula. Instead of a large spatula, you can work with a long ironer. The longer the tool, the smoother the surface is obtained. But working with such tools is more difficult, we do not recommend that beginners immediately take on large ironing stories, fill your hand on medium -sized tools. For the first time, take about 100-150 ml of solution. The more experience will appear, the more plaster can be applied at a time, the faster the work will go.
2. Tilt the spatula at an angle of about 30 ° to the surface of the wall and begin to move it from the bottom up. As the plaster consumes, constantly reduce the angle of inclination, at the very end the spatula should move almost parallel to the wall.

Maintain the spatula properly.

Decorative plaster application

DIY plastering

Step 9: Carefully remove the rails until the mixture has frozen. Using a clean spatula, clean the wall’s edges and position the tubercle. Avoid touching the spotless wall with your hands; instead, move them upward.

The image demonstrates how to differentiate between two shades using adhesive tape rather than racks.

It is best to remove the tape as soon as the plaster is applied.

Step 10: Smooth the plaster or create the desired design on it. Attach one rail to the completed plaster the following day, and the second rail to the previously drawn line. Follow the above algorithm to repeat all of the work. The lowest layer of brown pebble plaster with large stones is the final stage.

Application of a pebble plaster with a pneumatic unit

The work process can be considerably accelerated with the pneumatic unit. However, renting it out or doing manual labor is better than purchasing it especially for one home. Using a pneumatic explorer, a few layers are applied—at least two, minimum. The truth is that uniform plaster thickness will not be achievable in a single pass.

The use of pebble stucco

Vital. More care must be taken to prepare the wall’s surface for the pneumatic plaster application. The technology prevents surface alignment, which is accomplished with a spatula. Transitions in height must be removed by trimming them with finish putty and smearing the junction with a moist sponge. Proceed with extreme caution; avoid substituting recess for tubercles.

In addition to wearing a respirator, safety precautions for the respiratory system should be taken when using a pneumatic unit. Wear specific working clothes with a hood. The nozzle is roughly 50 centimeters from the wall, and the plaster has a slightly slurry consistency compared to manual plastering. Make sure to shield doors, door platbands, window glasses, and frames from the solution.

Prices for pneumatic airbrises, spray guns, texture pistols

Pneumatic airbrush, spray guns, texture pistols

How is the structure of "bark beetle"

Only the facade walls of a building can look authentic with this type of plaster; interior use is not advised. Plastering follows standard procedures at first, and the "bark beetle" is obtained at the end. You can use rubber or metal grout for work. The second option is superior because the pebbles don’t slide along it, creating grooves is simpler, and changing the direction of the grooves is trouble-free.

Rubber grouting spatula

Grout can be moved in both vertical and circular directions to create a "bark beetle." It’s important that the pebbles roll rather than slip during their movement, so don’t apply too much pressure. Rolling causes grooves to form. Remember to regularly rinse the grout; if you don’t, the grooves will become tightened with milk, requiring more repetitions of the process.

Up and down

Helical configuration "Barky"

Vital. Only the surfaces that have been pre-treated with two coats of white primer are suitable for various textured modifications. The base will be visible in the grooves where the plaster is only a few tenths of a millimeter thick. In this instance, the primer not only improves material adherence but also plains the foundation—a crucial step in the Koroudy plastering process.

Benefits of Camedomic Decorative Plaster	Enhances aesthetic appeal of building exteriors
Main Features	Durable, weather-resistant, easy to maintain

A cost-effective and aesthetically beautiful choice for improving a home’s external appearance is camedomic decorative plaster. Because of its distinct texture and customizable color options, homeowners can create a unique look that goes well with a variety of architectural styles.

The resilience to weather and longevity of Camedomic decorative plaster are two of its most notable qualities. It acts as a protective layer for building facades, ensuring longevity and reducing maintenance costs over time because it is made to withstand harsh environmental conditions.

Beyond its many uses, camedomic plaster also helps to insulate buildings against heat. It supports energy-efficiency initiatives by controlling heat absorption and retention to help maintain comfortable indoor temperatures.

Camedomic decorative plaster combines style and utility, whether it is applied during new construction or to update the exterior of an existing house. Even though applying it requires expert craftsmanship, the end product is a flawless finish that raises the curb appeal and overall value of the property.

Video on the topic

Camedomic decorative plaster

Decorative plaster is structural. Cameshopian

Decorative plaster Cameshkaya ilmax 6550. Application instructions