Brick paint

Painting brick can drastically change how the outside of your house looks. Brick paint provides a flexible solution, whether you want to update the appearance of old, weathered bricks or completely change the color scheme. A stylish and long-lasting finish that improves the curb appeal of your house can be achieved by selecting the appropriate paint and application technique.

Brick paint is designed specifically to stick to porous brick surfaces, forming an enduring bond that is resistant to peeling and cracking. This kind of paint can extend the life of your external walls by shielding the brick from moisture and UV rays in addition to covering imperfections. Because it comes in a range of hues and finishes, you can alter the appearance to fit your style preferences.

It’s important to prepare properly before applying brick paint. Usually, this entails washing the surface to get rid of loose mortar, mold, and debris. The bricks may need to be repaired if they have any chips or cracks, and you should give them enough time to dry. In order to guarantee an even finish and improved paint adhesion, primer might also be required.

Depending on the size and texture of the brick surface, you have three options for application: brushes, rollers, or sprayers. With regard to finish and coverage, each technique has advantages of its own. Patience and attention to detail are essential in order to achieve the desired color depth and uniformity, which may require multiple coats.

General requirements for external works

The facade walls’ operating conditions are intricate. The surface is negatively impacted by solar radiation, temperature fluctuations, and atmospheric precipitation. As a result, the colors ought to be able to tolerate these elements for an extended period of time without losing their original qualities.

Select paints for the facade.

How should one select facade paints?

The name of the parameter	Short description
Stability to the effects of alkalis	Many bricks distinguish the alkali, this feature is due to the presence of chemical compounds in the clay. Depending on their percentage content, the allocation of alkalis can be visible (the so -called heels) or invisible. But they always eat. The paint should not exfoliate on such surfaces.
Stability to burn out	Sunny rays have a negative effect on paint, over time it can change color. If you use low -quality materials, then the walls of the building will eventually become multi -colored. They brighten on the south side, and from the north they will retain the original hue.
Resistance to atmospheric precipitation	The coating should reliably protect the brick and the solution in the seams from moisture penetration. Wet materials expand during freezing, ice crystals appear on the surface and damage the paint. As a result, it exfoliates, you will have to make repairs.
Vapor permeability	The brick wall is poorly “breathing”, if the paint additionally reduces vapor permeability, then this worsens the microclimate in the room, negatively affects the stability of architectural structures.
Mechanical strength	The paint should not scratch, withstand not only one -time mechanical loads, but also a prolonged effect of abrasive dust.
Adhesion indicators	The strength of the clutch with the surface should provide for a long time of operation. Moreover, good clutch should be not only with brick, but also with cement-sand mortar.
Plastic	During heating the wall, it expands. The coating should easily compensate thermal linear expansion.
Technology	The paint should be easily applied with simple devices and dry relatively quickly. Do not require the use of individual protective equipment of the respiratory system and skin.

The cost of materials with these qualities cannot be low due to the extensive list of special requirements. And the final one. The paint’s service life varies depending on the manufacturer and brand, but it rarely lasts longer than ten years. You’ll need to make repairs when this time is up. When deciding whether or not to paint facade brick walls, bear this in mind.

The appearance and longevity of your house can be improved by selecting the ideal paint for your brick facade. In our brick paint article, we look at how various paints and finishes can improve your home’s appearance while shielding it from the weather. We’ll walk you through every step of the process to ensure that your brick facade is not only gorgeous but long-lasting, from comprehending the advantages of breathable paints to choosing colors that go well with your architectural style. The curb appeal of your home can be improved and maintained by choosing the ideal brick paint, whether you’re building new or renovating an existing structure.

General requirements for internal work

Paints are subject to additional requirements for internal use. Safety is added to the qualities mentioned above. Use water-based paint brands; paints cannot contain hazardous chemical compounds. Indicators for moisture permeability and sunlight resistance are not as difficult to find.

An painted brick wall and a balcony

General requirements for paints for painting stoves and fireplaces

High temperatures are reached by brick fireplaces and stoves. An extra prerequisite for materials: heat resistance. In these circumstances, regular paints quickly burn out and exfoliate. Examine the usage instructions thoroughly before purchasing paint; manufacturers will specify where their products can be used.

Types of brick paints

We will only cover the most widely used materials because we are unable to list every possible kind. Professional Malyans have also given positive reviews to the listed colors in addition to those from users.

Experts advise against making excessive savings or purchasing inferior quality colors. It is important to keep in mind that the expense of making hasty repairs always outweighs the savings on material costs.

Prices for different types of building colors

Building paint

Technology of painting brick surfaces

Only about 50% of brick walls will have a paint coating that lasts longer than that; everything else is dependent on how well surfaces are prepared and how precisely technology is followed. Don’t rush; pay attention to all the advice. Any marital adjustment takes a great deal of time and money in addition to additional funds. Painting is a process that can be divided into two equal stages based on stage importance: surface preparation and material application. Think about these processes in depth.

Surface preparation

You’ve chosen to paint the walls of the brick facade.

Step 1: Measure all surfaces except the spaces around windows and doors. There is no need to go into detail because this is not complicated.

Use of facade paint for a square meter

Measure things and record the findings in the table.

How to determine the walls’ area

Step 2: Decide on the paint brand and color. Analyze the use and establish the number in compliance with the guidelines. We highly advise bringing roughly 10% of the paint to the supply. Why? You can work more calmly first. Second, the manufacturer has no control over the precise properties of your wall surfaces, so it is up to them to determine how much paint is absorbed and how much is required to complete the job. Thirdly, in the event that the damaged portion of the facade wall needs to be repaired immediately, a little paint supply will always come in handy.

Step 3: Examine the wall’s surface and decide how best to prepare it based on the type and level of pollution as well as the condition of the brick. This is a very responsible piece of work, and mistakes are hard to fix. What should I look out for when updating the wall’s condition?

1. The presence of concrete mixture on the surface of bricks.
2. Suture condition: fullness, mechanical strength, appearance.
3. The condition of the facial surfaces of brick – whether there are stratification and deepening.
4. Are there any heels, how many of them and what intensity they are.

Examine the brick wall’s exterior surface.

Step 4: Get the brick wall’s surface ready for painting. Acetic acid, a spatula, a metal brush or drill, a rag, a broom, and a compressor are needed for this. Excellent if soft blasting can be achieved. The article will explain what it is and how we are being treated.

There are multiple steps involved in wall preparation.

Get rid of the sticky solution from the wall. Use metal brushes, a trowel, and a spatula. With a chisel, you can break off the brick that the solution is securely attached to. Examine the surfaces carefully and clear the dust.

Using a brush to clean the wall

Make sure the wall’s crumbling bricks are fixed if you find them. If you look as far down as you can, you should be able to see a sturdy body. The next step is to present a depression with a fix. The pit is very deep; divide it into multiple openings and allow each layer to partially freeze and dry before covering it to prevent the appearance of deep surface fissures.

Brickwork repair

Don’t wait for the cement to set fully. Making an embroidery under a brick’s seam in a sketched solution is advised to take about an hour and a half; if the solution solidifies completely, the task will become more difficult. Use wooden sticks or any other makeshift materials; the new seam’s width and depth must match the old one’s dimensions. The renovated space is identical to the surrounding areas after the wall’s surface was painted.

Utilize a homemade instrument to extend

Examine the stitching’s state. The main issue was that the master used very little cement and did not follow the procedures for manufacturing the solution during the wall’s masonry. Such a solution somewhat crumbles at the seams, and the paint there does not adhere. It’s a really bad situation. How should one proceed? It takes a long time to get out of either of the two exits.

1. First. Deepen the seam by 3-4 millimeters, make a new quality mass and carefully correct all the seams. Immediately you need to remove a fresh solution that enters the front of the brick.
2. Second. Buy a special primer and a small brush process seams. The number of processing – at least two. The primer should be with deep penetration.

Soil with deep penetration

Brush soil onto the joints between the masonry.

If there are heels, then they need to be thoroughly cleaned. Can be washed with a solution of vinegar, but the effect of this is not enough. The fact is that this is not superficial pollution, but protruding salts from bricks. The sorcerers will appear again before that time, until the whole brine comes out of the bricks. You can paint the surface only after the new crystals stopped appearing, only white spots are painted over. Work on cleansing of the rods is very difficult and prolonged. Unfortunately, even great efforts do not always lead to a positive result, you have to look for other methods to eliminate the problem. Modern materials and technologies make it possible to solve them much faster and easier than painting. We advise you to think carefully before trying to paint over the places of formation.

Getting rid of alpine on brick

Give the walls enough time to dry completely after they are prepared; at least one week of warm, dry weather is required. Staining cannot begin until after that point. Shut the doors and windows from the hit right away. Use tape and plastic wrap to khill them. Make sure the adhesive tape is securely attached; paint residue on windows and doors is tough to remove.

It would be great if there was a chance to use soft blasting to clean the brick wall. Not only is the work expedited, but the caliber also improves. Additionally, this is one of the few methods for cleaning the brick walls’ surface of graffiti, other inscriptions, soot, and burning odor. With the help of technology, pollution can be totally eliminated without endangering the upper layer’s safety. Cleaning supplies include chalk (calcium carbonate) and soda (sodium bicarbonate).

The parts are delivered to the cleaned surfaces via a high-pressure air stream via a calibrated nozzle. The performance of labor is increased while material consumption is reduced by approximately 30% thanks to modern devices. Cleaning expenses are lowered by at least 20%, and all tasks can be completed in a single work shift. One drawback is the expensive price of the device.

Deep penetration primer prices

A primer of deep penetration

Painting brick walls of the facade

Pneumatic spray guns, rollers, and brushes can all be used for painting. The requirements for paints vary slightly depending on the color method. It can be a little thicker for brushes and rollers, and diluted with a solvent for spray guns.

Staining with a spray

Vital. After preparing in a container, only pour paint for a spray gun through a specific sieve.

The facade was painted using a spray gun.

Prices for spray for colors

Krascopult

What benefits come with using a spray gunner?

1. Do not buy cheap spray guns, they have a high paint consumption. From the nozzles, the stream breaks out in various directions and at different speeds, a lot of material goes “nowhere”.
2. Movements should be down/up, and not left/right. If you notice a pass, immediately correct.
3. Never stop your hand, the brush should constantly move.

With a modern spray gun that is adjusted correctly, you can save up to 10% on paint and get better stain quality. Paint microparticles strike the brick’s surface with tremendous force and embed themselves in all of the fissures. Another significant benefit of spray guns is that the surface doesn’t need to be corrected again after use.

Painting with a roller and a brush

Paint application on a brick wall

The old-fashioned way of painting different surfaces. While working more quickly than a brush, the roller does not get caught in the deep seams. Once more, you must pass through a wall using a brush. These methods have one major drawback in addition to high complexity and low labor productivity. Cement-sand mortar particles adhere to them during operation, staying on brick faces and becoming visible. The painted wall becomes noticeably worse in appearance.

Roller paint application on the wall

Technology and choice of paint for internal work

Hazardous chemical compounds cannot be used for internal work, as we have already stated. Most of the time, a roller or brush is used to apply the paint. Bricks and seams can have their surfaces stained with a variety of colors.

Take precautions to shield the flooring from paint before beginning any work. Put some heavy paper or plastic wrap over them. Clear the workspace and place the paint container in a handy location. Take care when working; avoid getting paint on the floor.

Sensible guidance. A moderate speed should be maintained by the roller. Paint spray can fly over great distances and collide with other objects due to excessively rapid rotation.

To increase adhesion, the second layer is applied after the first has partially dried; do not allow it to dry completely. How can I determine the first layer’s standing? Use your fingertips to carefully draw on the surface; if they stick a little, you can add another coat of paint.

Every brick can be painted in your chosen color.

Painting of the stove

A new trend in interior design is called "country style," which incorporates as many traditional village elements as possible into the architecture of the space. A Russian stove is the most traditional component found in older homes. It is now regarded as a legitimate element in addition to a decorative one. Even though the surface temperature might reach over 100 degrees, not all paints can tolerate these severe operating circumstances. Lime was once used to paint the stoves; it was inexpensive, hygienic, dependable, and quick. One drawback was that every year I had to explain the pain, lime was quickly removed.

Nowadays, very few people use lime; instead, high temperatures and water-based paints that are safe for residents have taken its place. Prior to making a purchase, make sure you read the manufacturer’s instructions and only purchase materials that can withstand high temperatures. Staining surfaces uses the same technology as mentioned above.

A brick stove in a contemporary setting

It’s a little simpler with a fireplace. The fireplaces’ utility coefficient is the lowest of all heating devices, meaning that their design does not allow for significant surface heating. The fireplace is typically positioned for prestige and beauty; the area around it only gets warm when firewood is being burned. The fire has gone out, so you should find somewhere else to stay somewhere warm. With the exception of others’ safety, these design elements make it easier to select a particular paint color. No other requirements are mentioned.

Thermo -resistant colors

Heat -resistant paint

Your brick facade can be made to look different and weatherproof by using the right paint. Whether you’re looking to update the look of your home with a more traditional or modern finish, brick paint is a flexible solution.

Think about things like weather resistance and durability when choosing brick paint. Choose paints that are made especially for outdoor use; they will not fade or peel under the influence of moisture, UV light, or temperature changes.

The secret to a flawless and long-lasting finish is preparation. Thoroughly clean the brick to get rid of any dirt, mold, or efflorescence before painting. Fix any damage or cracks, then let the surface dry fully.

Brick paint application involves precise technique. To guarantee uniform coverage, use a premium brush or roller and work in small sections. It is better to apply several thin coats rather than a single thick coat so that each layer can completely dry in between applications.

Lastly, give the color considerable thought. Brick paint is available in a range of tones, so spend some time testing samples on your facade to see how they appear under various lighting settings. The right paint can improve the longevity and curb appeal of your home, whether you go for a subtle shade to blend in with your surroundings or a bold hue to make a statement.

Video on the topic

KU-9007 Wydrophobizing varnish for brick, concrete, stone Kudo

varnishing

Painting a brick facade

How and how to paint a brick wall?

Repair of the old brick facade 20 rubles per square