Balcony trim with a lining inside with your own hands

Adding a lining to your balcony can improve its appearance and make your outdoor space more fashionable and useful. A well-selected lining prolongs the life of your balcony surfaces by offering protection from the elements as well as improving appearance. In addition to saving money, doing this project yourself gives you the satisfaction of customizing your living area to suit your tastes and preferences.

Selecting the appropriate kind of lining is essential to getting the desired appearance and longevity. Traditional wood and contemporary synthetic materials are among the options; each has unique benefits with regard to cost, upkeep, and visual appeal. While choosing the ideal material for your balcony trim, take into account elements like the surrounding climate and the overall architectural style of your house.

Make sure you have all the equipment and supplies you’ll need before you start. Along with the selected lining material and any sealants or protective finishes, basic tools like a measuring tape, saw, and hammer will be necessary. Setting up your workspace and supplies ahead of time will help you get professional-looking results and speed up the process.

Materials Needed	Tools Required
PVC or wooden lining	Tape measure
Mounting adhesive or screws	Saw or cutter
Primer and paint	Level and pencil
Sandpaper	Paintbrush or roller

How to finish the balcony from the inside

The two most widely used finishing materials for premises, among the many available, are Euro-Russian and regular lining. Oak, ash, linden, alder, pine, and pine boards are specially made (other types of wood can be used). It should be noted that pine materials should not be faced toward the sun because, when heated, the pine releases its oils and degrades the room’s exterior appearance.

Additionally, there are artificially produced wagon facing materials; the most common ones are PVC, MDF, seamless, and suture panels.

Which are the tails wagging at?

What is the difference between the Euro -Russian War and the usual wood lining?

A spoon used for a docking or profile, a lining or Eurolank is a string board with grooves. With the right maintenance and protection from direct sunlight, moisture, pests (such as mice and rats), insects, and other elements, these cladding options can last up to 20 years.

GOST 8242–88. Wood and wood-based building materials were used to create the profile details. A downloadable file. GOST 8242-88

The primary distinctions between euro and lining are listed below.

1. These profiles have different thickness, width, quality.
2. EVERENTS is more demanding in care than a regular wood lining.
3. Materials have different manufacturing technologies. EVERENTS – this is almost completely dried material, and the lining has its natural humidity (it was not used additional dried processing).
4. Evalism has specially provided grooves for condensation, so such panels are less rotted. Also, these internal grooves allow to remove the voltage from the board and finished cladding.
5. The cost of the materials is also different (Eurolank will cost more).

How the lining functions One, the spike; two, the shelf; three, the facial placement; four, the compensation grooves; and five, the groove’s lower edge; Working width (a) and full width (b).

The advantages of a wooden lining

The lining’s primary benefits include the following:

• It is made of environmentally friendly material;
• characterized by resistance to temperature differences, mechanical damage;
• It has good thermal insulation;
• has a long service life.

There are four classes of wooden linings based on material quality. When these boards are prepared for molding and sale, they are categorized and manufactured for a limited time.

Categories of wooden interiors

Table: Wooden lining classes.

High-quality (prima or extra)

Read more about the existing forms of the finished facing board

Distribute multiple types of cladding-ready boards. The boards are processed before being sold, which produces the following kinds of lining:

• block house (imitation of logs);
• imitation of the beam;
• Soft Line;
• calm;
• EVERENTS;
• Landhaus.

Various natural lining profile variations

Mining prices, imitation of the beam, block house

Log, imitation of a beam, block house

What is required for lining the balcony with your own

The apartment’s owner or a professional brigade can both do the balcony sheathing. While specialized knowledge or abilities are not required to perform this type of work, it is still important to prepare thoroughly and approach the task with responsibility.

To successfully complete internal work, you must be aware of the fundamental guidelines.

1. Before finishing, it is worth preparing the surface of the walls well.
2. Only high -quality material is used for skin. It is best to give preference to the premium class, but if the financial situation does not allow, then you can use it or. (C is, roughly speaking, waste that is still used in some cases).
3. Before buying, you need to calculate the number of consumables, but you need to purchase them with a small margin.

How to figure out how many linings to use from the inside of the balcony

Finding the total number of lines

Tools and materials

Only with all of the aforementioned equipment and supplies can balcony sheathing be completed in a qualitative manner.

For work, you’ll require:

• high power punch or drill;
• screwdriver;
• core (1 mm, suitable in size to self -tapping screws);
• high -quality drills, 4 and 6 mm in diameter;
• hacksaw or jigsaw on wood;
• level;
• simple pencil, roulette, square;
• hammer and ax;
• Self -tapping screws 90, 75 and 50 mm;
• 30 mm nails with a large hat, dowels; For perfectly even surfaces, dowels of 6*60 are suitable, but with minor irregularities – 6*100.

Trim for the balcony

Prices for Popular Puner models

Perforators

Preparation of walls for casing

Surface preparation is required before work can begin. It is necessary that the lining be securely fastened, that the walls not leak, and that mold and fungus do not grow on them. It needs to be flashed with plaster, any irregularities removed, and the surfaces treated with an antifungal solution in order to achieve this.

Initially, all surfaces are thoroughly cleaned to remove all dust and debris from the balcony.

This guide explains how to install interior lining trim yourself and improve the durability and aesthetics of your balcony. Knowing the fundamentals of balcony trim can turn your outdoor space into a chic addition to your house, whether your goal is to create a functional space or a cozy retreat. We will guide you through every step of the process, from selecting the appropriate materials to offering helpful installation advice, so you can easily accomplish professional-looking results without having to pay for expensive professional assistance.

Insulation work

Insulating the balcony is a crucial step after preparation. Rolls and plates of balcony insulation are available for purchase in stores.

Since "Penofol" and "Isolon" materials have a foil foundation, they are applied to the wall’s surface following preparation and drying. Next, a lining frame is installed on top of the insulation.

Balcony "foam" insulation (a lining frame is installed on top of the heat insulator)

If you plan to use mineral wool or foam slabs, you should set up a lining frame as soon as possible and install the insulation in between the rails.

DIY foam peno insulation

Prices for mineral wool

Minvata

Proper installation of the frame

Coreplain for the lining

Step 1: First, use the level to ensure that the surface was smooth. Work should begin below if the upper area needs to hold more weight than the lower.

Step 2: After installing the vertical rails, the horizontal rails are placed in between them.

Making the balcony lining by hand

Step 3: The necessary length of the guide rail is chopped off.

Step 4: Future lining mount locations are noted. Place a tag every 60–80 centimeters.

Step 5: Drill holes that are 5 to 6 cm deep using a 6 mm drill bit.

Step 6: Corner racks are the first to be installed on the crate.

Step 7: The placement of reiki is as follows: the first is at the knee level, the second at the hip level, and the third at the shoulders. It is important to note that there is a 50 cm space between each bar.

The frame is installed (without insulation)

Step 8: You don’t have to tighten the screws right away. Plastic chokes are used as bait for the first guides.

Step 9: Make sure the rail is appropriate for the level before installing it.

Step 10: A dowel clogs the rake, which can be covered up with a screwdriver.

You must use a plastic nozzle for a dowel that is at least 30 mm deep and tightly inserted into the hole.

Step 11: To see the evenness of the wagon styling during installation, vertical lines must be drawn along the working perimeter. The cords are pulled for this.

Step 12: The remaining bars are attached, beginning with these indicators.

Step 13: You must now lay horizontal rails after installing vertical ones.

Securing horizontal rails

Step 14: Insert the mineral wool into the formed cells and secure it with adhesive foam that has been specially designed if the wool is to be used as insulation.

Mineral wool for warming walls and ceilings

Step 15: A vapor barrier is then put in place.

Mounting the frame on a deformed surface

You can mount the frame in a different way if the working surfaces have noticeable imperfections that will take a lot of time, money, and effort to fix.

1. Install the rail on the maximum even possible section of the wall and attach a plumb line to it.
2. Fix the subsequent lower bars, starting from plumbing indicators.
3. Where it is necessary to reduce the distance between the surface and the rail, make the substrate, and with visible convexity, remove the upper layer of plaster.

In order to conceal the walls’ flaws in the most affordable and widely available manner possible. There won’t be any visible signs of deformation following the installation process.

Installation of the lining

Step 1: Gather all the equipment and supplies needed for the cladding project, including a drill, self-tapping screws, tiny nails, cowls or dowels, a level, and wood pieces.

Scheme for installing liners

Step 2: Fasten a single board to the corner of the assembled frame. Use the level to ensure that the angle is uniform.

Step 3: You can use the bastard after confirming that the board is positioned correctly (vertically). This is accomplished by inserting the latter into the wood groove and fastening it with a tiny nail.

For the lining, Klyimers

Because the structure of the wood is so delicate, it’s crucial to avoid damaging it when clogging a nail. It is advised to do this by lightly hitting a nail with a hammer and covering it with simple hugs.

Using a nail to secure it to the crate

You must screw the self-tapping screw into the groove (tilt inward) in order to firmly secure the lining to the crate.

This method may cause cracks in wood. To prevent this, you must use a drill to create a hole at the mounting location before inserting the self-tapping screw.

You should first drill a hole in the board using a thin drill bit to prevent damaging the material.

Step 4: To secure the second board, carefully slide it into the first board’s groove (from the bottom up) and use a bastard or self-tapping screw to secure it.

Securing the second board

Step 5: You must carry out all of the manipulations again when installing the third board. Once the wood has risen into place, use a hammer to firmly secure it to the preceding boards all the way along. You must apply a bar and knock on the board so as to avoid leaving any trace.

To avoid damaging the working part, masters use a small (30 cm) segment of the lining that is inserted into the grooves and hammered.

Step 6: Install everything along the working perimeter in the same manner.

Completing the wooden balcony lining installation

The skin of the ceiling frame

Step 7: Installing skirting boards allows you to conceal the seams in the corners where the board joints are made. This is the final step in the skin.

Skirting boards at the lining’s joints

To accomplish this, fasten the completed skirting board to the corner, drill the hole with the thinnest possible drill bit, and hammer in a few tiny, discrete nails. These kinds of things are done all the way around the balcony.

Video – lining the balcony with a lining from the inside with your own hands

Suggested Use! When sewing a balcony, it is worthwhile to use a Euro-car. It is more resistant to mold and fungus and has a low humidity level.

Additionally, the Euro-Wagon is simpler and more dependable because its spikes are longer (8–9 mm) than those of a traditional lining (4-5 mm).

Protective coating for finished casing

With the use of a protective coating, you can give wood material (lining) a smoother, more appealing appearance while shielding it from the elements and mold or fungus.

For this, the following funds are utilized:

• Antiseptic drugs: covering or glazing;
• varnishes: alkyd and acrylic;
• Paints: oil or acrylate.

Yacht varnish, also known as boat varnish and based on polyurethane, is appropriate for the loggia’s lining. This tool is ideal for protecting against moisture exposure because it is used to process wooden boats.

Additionally, you can use acrylic paint, which needs to be applied to the lining in multiple layers, to give the boards strength and shade.

Lining your balcony can be a rewarding do-it-yourself project that improves the look and usability of your house. In addition to saving money, doing it yourself gives you the satisfaction of customizing your living area to fit your needs and tastes.

Selecting the appropriate materials is essential for a balcony trim project to be successful. Choose materials that can withstand outdoor elements without frequent maintenance, such as composite wood or PVC. These materials are not only strong but also available in a range of hues and finishes, so you can match or enhance the exterior of your house.

Make sure you have the required instruments and measurements before you start. Precise measurements guarantee a tight fit and reduce waste, and having the appropriate equipment, like a drill, saw, and measuring tape, will facilitate the installation process.

There are multiple steps involved in installing the lining, the first of which is prepping the balcony surface and framing. Make sure the framing is sturdy enough to hold the weight of the lining by making sure it is fastened correctly. The lining panels should then be cut to size and firmly fastened to the frame. Finally, to seal gaps and improve the look of your freshly trimmed balcony, add finishing touches like caulking.

By following these guidelines and devoting some time to thoughtful planning and execution, you can turn your balcony into a chic and useful outdoor area that improves the appearance and market value of your house.

Video on the topic

Balcony repair. EVERABLE REGURE DIRECTIONS.

How to sheathe lining with your own hands.

The best way to insulate and finish the loggia and balcony build for ourselves

How to insulate a loggia for 4500r with your own hands

Balcony sheathing with wooden lining

Lining the balcony lining